It is more faster and easier to pass the Cisco 010-151 exam by using Exact Cisco Cisco Certified Technician (CCT) for Data Center questuins and answers. Immediate access to the Up to the immediate present 010-151 Exam and find the same core area 010-151 questions with professionally verified answers, then PASS your exam with a high score now.


2024 New 010-151 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/010-151/

Q1. Which three components are hot swappable in a Cisco UCS Blade Server and Chassis? (Choose three.) 

A. Fabric Extender 

B. Power supply 

C. Heat sink 

D. SAS Hard Drive 

E. 2x8GB Kit DIMMs 

F. Mezzanine card 

Answer: A,B,D 

Q2. Which command syntax is correct to reset the admin password when the switch is in the kickstart prompt "switch(boot) #"? 

A. exec -> admin-password <password> 

B. connect local-mgmt -> admin-password <password> 

C. configure terminal -> admin-password <password> 

D. connect nxos -> admin-password <password> 

E. admin-password <password> 

Answer: C 

Q3. Refer to the exhibit. 

Which statement correctly identifies the front panel LEDs on the Cisco UCS C220 Server? 

A. A is power button and power status LED; B is identification button and LED; C is system status LED; D is network link activity LED. 

B. A is network link activity LED; B is system status LED; C is power button and power status LED; D is identification button and LED. 

C. A is system status LED; B is network link activity LED; C is power button and power status LED; D is identification button and LED. 

D. A is network link activity LED; B is system status LED; C is identification button and LED; D is power button and power status LED. 

Answer: A 

Q4. Refer to the exhibit. 

This image shows a CPU Pick-and-Place tool and a CPU Socket Protective Cap Removal tool. 

Which types of Cisco UCS servers and Intel Xeon processors do these tools support? 

A. Cisco UCS B22 Blade Server, C22 Rack Server, and C24 Rack Sever with Intel Xeon E5-2400 Series processors 

B. Cisco UCS B22 Blade Server, C22 Rack Server, and C24 Rack Sever with Intel Xeon E5-2600 Series processors 

C. Cisco UCS B200 M3 Blade Server, B420 M3 Blade Server, C220 Rack Server, C240 Rack Sever, and C420 Rack Sever with Intel Xeon E5-2400 Series processors 

D. Cisco UCS B200 M3 Blade Server, B420 M3 Blade Server, C220 Rack Server, C240 Rack Sever, and C420 Rack Sever with Intel Xeon E5-2600 Series processors 

Answer: D 

Q5. On the Sensors page from the CIMC view, which four tabs are displayed to view further information? (Choose four.) 

A. Power Supply 

B. Fan 

C. Memory 

D. CPU 

E. LEDs 

F. Temperature 

Answer: A,B,E,F 

Q6. How many 10GBASE-T port licenses are preinstalled on a Cisco Nexus 3064-32T? 

A. 16 

B. 32 

C. 48 

D. 64 Answer: B 

Answer:

Q7. Which three statements about powering down a Cisco UCS C-Series Rack-Mount Server to perform maintenance or replacement are true? (Choose three.) 

A. Standby power mode: Power is supplied only to the service processor and the cooling fans, and it is safe to power off the server from this mode. 

B. Power status LED. Green indicates that the server is in main power mode and can be safely powered off. 

C. Graceful shutdown: Press and release the power button. The operating system performs a graceful shutdown, and the server goes to standby mode, which is indicated by an amber power status LED. 

D. Disconnect the power cords from the power supplies in your server to completely power off the server. 

E. Only an emergency shutdown can be performed using the power button on the server front panel. 

F. The Cisco UCS C-Series Rack-Mount Server has only one power mode. 

Answer: A,C,D 

Q8. Which three steps do you perform to troubleshoot when a rack server powers on with no video? (Choose three.) 

A. Check that the front I/O dongle is properly seated. 

B. Check the front I/O cable connection to the motherboard. 

C. Check for memory subsystem failure. 

D. Verify the power source to equipment. 

E. Reseat the DIMMs, CPU, and PCI cards. 

Answer: A,B,C  

Q9. Which two major components does a Cisco Nexus 1000V Series Switch have? (Choose two.) 

A. Virtual Fiber Channel Module 

B. Virtual Ethernet Module 

C. Virtual Supervisor Module 

D. Virtual Memory Controller Module 

E. Virtual Network Module 

Answer: B,C 

Q10. When the Cisco UCS Manager is used to verify the B- or C-Series device, which two types of Overall Status are acceptable and do not indicate a failure? (Choose two.) 

A. Online 

B. OK 

C. Unassociated 

D. Active 

Answer: B,C