we provide Exact Check Point 156-915.80 braindumps which are the best for clearing 156-915.80 test, and to get certified by Check Point Check Point Certified Security Expert Update - R80. The 156-915.80 Questions & Answers covers all the knowledge points of the real 156-915.80 exam. Crack your Check Point 156-915.80 Exam with latest dumps, guaranteed!
2024 New 156-915.80 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/156-915.80/
P.S. Exact 156-915.80 preparation labs are available on Google Drive, GET MORE: https://drive.google.com/open?id=1kHtvfzv89_QPh4A3_cAnuAFq9mDuP3yP
New Check Point 156-915.80 Exam Dumps Collection (Question 1 - Question 10)
New Questions 1
In the following cluster configuration; if you reboot sglondon_1 which device will be active when sglondon_1 is back up and running? Why?
A. sglondon_1 because it the first configured object with the lowest IP.
B. sglondon_2 because sglondon_1 has highest IP.
C. sglondon_1, because it is up again, sglondon_2 took over during reboot.
D. sglondon_2 because it has highest priority.
Answer: D
New Questions 2
Many companies have defined more than one administrator. To increase security, only one administrator should be able to install a Rule Base on a specific Firewall. How do you configure this?
A. Define a permission profile in SmartDashboard with read/write privileges, but restrict it to all other firewalls by placing them in the Policy Targets field. Then, an administrator with this permission profile cannot install a policy on any Firewall not listed here.
B. Put the one administrator in an Administrator group and configure this group in the specific Firewall
object in Advanced > Permission to Install.
C. In the object General Properties representing the specific Firewall, go to the Software Blades product list and select Firewall. Right-click in the menu, select Administrator to Install to define only this administrator.
D. Right-click on the object representing the specific administrator, and select that Firewall in Policy Targets.
Answer: B
New Questions 3
What is the purpose of Priority Delta in VRRP?
A. When a box is up, Effective Priority = Priority + Priority Delta
B. When an Interface is up, Effective Priority = Priority + Priority Delta
C. When an Interface fail, Effective Priority = Priority u2013 Priority Delta
D. When a box fail, Effective Priority = Priority u2013 Priority Delta
Answer: C
Explanation:
Each instance of VRRP running on a supported interface may monitor the link state of other interfaces. The monitored interfaces do not have to be running VRRP. If a monitored interface loses its link state, then VRRP will decrement its priority over a VRID by the specified delta value and then will send out a new VRRP HELLO packet. If the new effective priority is less than the priority a backup platform has, then the backup platform will beging to send out its own HELLO packet. Once the master sees this packet with a priority greater than its own, then it releases the VIP.
New Questions 4
Fill in the blank.
In Load Sharing Unicast mode, the internal cluster IP address is 10.4.8.3. The internal interfaces on two members are 10.4.8.1 and 10.4.8.2. Internal host 10.4.8.108 Pings 10.4.8.3, and receives replies. The following is the ARP table from the internal Windows host 10.4.8.108. Review the exhibit and type the IP address of the member serving as the pivot machine in the space below.
Answer:
10.4.8.2
New Questions 5
Which is a suitable command to check whether Drop Templates are activated or not?
A. fw ctl get int activate _drop_ templates
B. fwaccel stat
C. fwaccel stats
D. fw ctl templates u2013d
Answer: B
New Questions 6
You are running a R80 Security Gateway on GAiA. In case of a hardware failure, you have a server with the exact same hardware and firewall version installed. What back up method could be used to quickly put the secondary firewall into production?
A. manual backup
B. upgrade_export
C. backup
D. snapshot
Answer: D
New Questions 7
What is the primary benefit of using the command upgrade_export over either backup or snapshot?
A. upgrade_export is operating system independent and can be used when backup or snapshot is not available.
B. upgrade_export will back up routing tables, hosts files, and manual ARP configurations, where backup and snapshot will not.
C. The commands backup and snapshot can take a long time to run whereas upgrade_export will take a much shorter amount of time.
D. upgrade_export has an option to back up the system and SmartView Tracker logs while backup and snapshot will not.
Answer: A
New Questions 8
Use the table to match the BEST Management High Availability synchronication-status descriptions for your Security Management Server (SMS).
Exhibit:
A. A-5, B-3, C-1, D-2
B. A-3, B-1, C-4, D-2
C. A-3, B-5, C-2, D-4
D. A-3, B-1, C-5, D-4
Answer: D
New Questions 9
Where does the security administrator activate Identity Awareness within SmartDashboard?
A. Gateway Object > General Properties
B. Security Management Server > Identity Awareness
C. Policy > Global Properties > Identity Awareness
D. LDAP Server Object > General Properties
Answer: A
New Questions 10
Which of the following authentication methods can be configured in the Identity Awareness setup wizard?
A. Check Point Password
B. TACACS
C. LDAP
D. Windows password
Answer: C
P.S. Easily pass 156-915.80 Exam with Surepassexam Exact Dumps & pdf vce, Try Free: https://www.surepassexam.com/156-915.80-exam-dumps.html ( New Questions)