Updated 1Y0-230 Courses 2021

NEW QUESTION 1
In an environment which requires secure user access, a Citrix Administrator configures Authentication, Authorization and Auditing (AAA) to redirect a user to the logon page.
Which four steps are required to complete the authentication process? (Choose four.)

• A. Configure a syslog server to capture invalid logon attempts?
• B. Verify that the user is authorized to access specific intranet content
• C. Collect the user’s credentials to cache them in a directory that is accessible through LDAP
• D. Log the user accesses, including invalid login attempts, in an audit log
• E. Create a load-balancing virtual server to redirect for secure access
• F. Maintain a session timeout, after which users must authenticate again to regain access to the intranet
• G. Apply specified two-factor authentication method

Answer: CEFG

NEW QUESTION 2
Scenario: A Citrix Administrator configured SNMP to send traps to an external SNMP system. When reviewing the messages, the administrator noticed several entity UP and entity DOWN messages.
To what are these messages related?

• A. High availability synchronization
• B. Load balancing virtual servers
• C. High availability heartbeats
• D. Network interface

Answer: B

NEW QUESTION 3
Scenario: A Citrix Administrator is evaluating the following policies in an environment.

Which policy will take effect in the event of a policy conflict?

• A. Policy B
• B. Policy A
• C. Policy D
• D. Policy C

Answer: D

NEW QUESTION 4
Scenario: A Citrix Administrator is configuring balancing on a NetScaler appliance for the company web servers. The administrator needs to create a custom monitor that will look for a specific keyword response from the website and will be used to keep the services in an UP state.
Which type of monitor can the administrator create to accomplish this scenario?

• A. An HTTP-ECV monitor with the keyword in the Special Parameters- Receive String field.
• B. A customer TCP-ECV monitor with the keyword in the Special Parameters- Receive String field.
• C. An HTTP monitor with the keyword in the Special Parameters- Response Codes field.
• D. A TCP monitor with the keyword in the Special Parameters- Response Codes field.

Answer: C

NEW QUESTION 5
What does a Citrix Administrator need to do on NetScaler Gateway to ensure that users accept the terms and conditions before they can log on using NetScaler Gateway?

• A. Configure a Responder policy.
• B. Upload an HTML file to the NetScaler appliance.
• C. Create an end user license agreement (EULA).
• D. Configure a Rewrite policy.

Answer: C

NEW QUESTION 6
Which three services can the StoreFront monitor probe to determine the state of the StoreFront server? (Choose three.)

• A. Default Domain
• B. Discovery
• C. Authentication
• D. Subscription
• E. Account

Answer: BCE

NEW QUESTION 7
Scenario: A user is attempting to access a web server, which is load-balanced by the NetScaler using HTTPS. The user received the following message:
SSL/TLS error: You have not chosen to trust “Certificate Authority” the issuer of the server’s security certificate.
What can a Citrix Administrator do to prevent users from viewing this message?

• A. Ensure that the intermediate Certificate is linked to the Server Certificate.
• B. Ensure that the user has the Server Certificate installed.
• C. Ensure that the intermediate Certificate is linked to the Root Certificate.
• D. Ensure that the user has the Certificate’s Public key.

Answer: A

NEW QUESTION 8
A Citrix Administrator needs to configure single sign-on to a StoreFront server using an external, secure single URL.
Which type of virtual server can the administrator use to meet this requirement?

• A. Load Balancing
• B. Content Switching
• C. VPN
• D. Unified Gateway

Answer: D

NEW QUESTION 9
A Citrix Administrator has deployed a new NetScaler MPX appliance in the demilitarized (DMZ) with one interface in the DMZ and the other on the internal network.
In which mode should the administrator deploy the NetScaler?

• A. One-Arm
• B. Two-Arm
• C. Forward Proxy
• D. Transparent

Answer: D

NEW QUESTION 10
Which type of policy can be applied to a NetScaler Gateway virtual server to limit access to XenDesktop resources, if the user device does NOT comply with the company’s security requirements?

• A. Responder
• B. Authorization
• C. Session
• D. Traffic

Answer: A

NEW QUESTION 11
Scenario: A XenDesktop Administrator just updated a StoreFront server to the X1 Receiver portal theme. The NetScaler Administrator would like to update the gateway to match StoreFront as closely as possible.
How can the NetScaler Administrator accomplish this with the least amount of administrative effort and without impacting connectivity through the gateway during the change?

• A. Create a new gateway with the X1 theme.
• B. Update the existing gateway by selecting the X1 theme from the global settings.
• C. Create a new gateway with a customs theme to match StoreFront.
• D. Update the existing gateway by building a custom theme to match StoreFront.

Answer: B

NEW QUESTION 12
Which type of entity can a Citrix Administrator configure to support the use of an SSL rewrite policy?

• A. Global server load balancing virtual server
• B. Content Switching virtual server
• C. SSL load balancing virtual server
• D. SSL_Bridge balancing virtual server

Answer: B

NEW QUESTION 13
Scenario: A Citrix Administrator needs to configure a NetScaler Gateway virtual server in order to meet the security requirements of the organization. The administrator needs to configure timeouts for end-user sessions, to be triggered by the following behaviors:
-Inactivity for at least 15 minutes
-No keyboard or mouse activity for at least 15 minutes
Which two timeout settings can the administrator configure to meet the requirements? (Choose two.)

• A. Client Idle Time-out set to 15
• B. Forced Time-out set to 15
• C. Client Idle Time-out set to 900
• D. Session Time-out set to 15
• E. Session Time-out set to 900
• F. Forced Time-out set to 900

Answer: CE

NEW QUESTION 14
Scenario: A NetScaler is configured with the following modes:
-MAC-based Forwarding
-USIP
-USNIP
-Layer 3 mode
A Citrix Administrator configured a new router and now requires some of the incoming and outgoing traffic to take different paths through the new router. However, the administrator notices that this is failing and takes a network trace. After a short monitoring period, the administrator notices that the packets are still NOT getting to the new router from the NetScaler.
Which mode should the administrator disable on the NetScaler to facilitate the addition of the new router and successfully route the packets?

• A. MAC-based Forwarding
• B. USIP
• C. Layer 3 mode
• D. USNIP

Answer: D

NEW QUESTION 15
Which NetScaler feature can a Citrix Administrator use to create a customer footer for a NetScaler Gateway login page?

• A. Rewrite
• B. SmartAccess
• C. HTTP Callout
• D. Responder

Answer: A

NEW QUESTION 16
Where should a Citrix Administrator configure SmartControl restrictions?

• A. NetScaler Gateway
• B. XenDesktop Delivery Controller
• C. NetScaler Gateway, XenDesktop Delivery Controller and StoreFront
• D. StoreFront and XenDesktop Delivery Controller

Answer: A

NEW QUESTION 17
Scenario: A Citrix Administrator has made changes to the NetScaler, deleting parts of the configuration, and then saved the new configurations. The changes caused an outage which needs to be resolved as quickly as possible. There is no NetScaler backup.
What does the administrator need to do to recover the configuration quickly?

• A. Restart the NetScaler
• B. Run Save v/s Running configuration
• C. Restore from revision history
• D. Run HA file synchronization

Answer: D

NEW QUESTION 18
Scenario: A Citrix Administrator of a Linux environment needs to load-balance the web servers in an environment. However, due to budget constraints, the administrator is NOT able to implement a full-scale solution.
What can the administrator do to load-balance the web servers in this scenario?

• A. Install a NetScaler CPX.
• B. Purchase NetScaler MPX.
• C. Purchase a NetScaler SDX.
• D. Install NetScaler VPX.

Answer: A

NEW QUESTION 19
Which two options should a Citrix Administrator consider when adding a secondary device in a high availability (HA) pair? (Choose two.)

• A. The Independent Network Configuration (INC) mode should be enabled.
• B. Both the devices should have different SNIP addresses.
• C. The nsroot password should be the same on both nodes.
• D. HA Monitoring should be disabled on all the unused interfaces.
• E. Configure the HA status of the Primary Node as STAYPRIMARY.

Answer: CD

NEW QUESTION 20
Scenario: A Citrix Administrator has a NetScaler SDX appliance with several instances configured. The administrator needs one instance with two interfaces connected to forward packets that are NOT destined for its MAC address. Hence, the administrator has enabled Layer 2 mode. After enabling Layer 2 mode, the administrator found the interface status going up and down.
What can the administrator perform to resolve this issue?

• A. Disable Layer 2 mode on a NetScaler instance.
• B. Enable MAC-based Forwarding mode.
• C. Enable tagging on all interfaces.
• D. Enable Layer 3 mode along with Layer 2 mode.

Answer: C

NEW QUESTION 21
Scenario: A Citrix Administrator needs to build policies that control the selection of XenApp applications to which a user has access. The administrator would like for the policy decisions to be made by leveraging the HDX settings.
Which type of policy would enable this requirement?

• A. Traffic
• B. SmartControl
• C. Authorization
• D. SmartAccess

Answer: D

NEW QUESTION 22
Which three statements are true when comparing a Simple Access Control List (ACL) to an Extended ACL? (Choose three.)

• A. Extended ACLs have priorities
• B. Simple ACLs can be modified
• C. Extended ACLs apply first
• D. Simple ACLs can be based on the Source and Destination IP address
• E. Simple ACLs can bridge traffic
• F. Simple ACLs are based on the Source IP address only
• G. Simple ACLs apply first

Answer: ADG

NEW QUESTION 23
Which two items can a Citrix Administrator change when configuring a default portal theme? (Choose two.)

• A. Center logo
• B. NetScaler with Unified Gateway header
• C. Browser requirements
• D. Font color

Answer: AD

NEW QUESTION 24
While troubleshooting an SSL issue on one of the SSL-based virtual servers, a Citrix Administrator noticed that the data captured from the TCP dump was showing in plain text.
What could be the cause of this issue?

• A. No SSL cipher suite was selected
• B. The SSL Certificate expired
• C. The selected cipher suite is obsolete
• D. Misconfiguration of the TCP profile

Answer: A

NEW QUESTION 25
Scenario: Client connects to certain virtual servers are abnormally high. A Citrix Administrator needs to be alerted whatever the connections pass a certain threshold.
How can the administrator use NetScaler Management and Analytics System (MAS) to accomplish this requirement?

• A. Configure SMTP Reporting on the NetScaler MAS by adding the threshold and email address.
• B. Configure specific alerts for virtual servers using NetScaler MAS.
• C. Configure TCP Insight on the NetScaler MAS.
• D. Configure Network Reporting on the NetScaler MAS by setting the threshold and email address.

Answer: D

NEW QUESTION 26
......