Citrix 1Y0-402 Dumps 2021

NEW QUESTION 1
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment.
The table in the Exhibit lists details about the requirements of the current user groups and their Virtual Delivery Agent (VDA) machine workloads.
Click the Exhibit button to view the table.

The architect should scale the hardware used to host the VMs for User Group 1 to ____ cores. (Choose the correct option to complete the sentence.)

• A. 32
• B. 24
• C. 16
• D. 96
• E. 64

Answer: B

NEW QUESTION 2
Scenario: During an assessment, a Citrix Architect is asked to review a Citrix policy setting that is NOT being applied as intended. The policy was intended to allow any user from the Managers group who is accessing Virtual Delivery Agent (VDA) machines within the “Win2012 Desktops” Delivery Group to access local client drives from within the HDX session.
However, testing verifies that users from the Managers group are NOT able to view their endpoint's drives from within their session. While verifying the policy settings, the architect notes several misconfigurations.
Click the Exhibit button to view information collected by the architect during the investigation.

Which action would permit the “Allow client fixed drives access” policy to apply to the Managers group?

• A. Add a security filter to the GPO containing Citrix policies in the Group Policy Management Console.
• B. Change the assignment of the policy in Citrix Studio.
• C. Change the priority of the policy in Citrix Studio.
• D. Change the link location for the Loopback processing GPO in the Group Policy Management Console.

Answer: C

NEW QUESTION 3
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment. The design will require three different StoreFront Stores and three corresponding Citrix Receiver for Web sites. Each different Store and Citrix Receiver for Web site will serve different business units. Each of these will also require their own branding and SSL certificate. The solution should remain supported by Citrix.
The architect has already installed StoreFront on a server.
How can the architect achieve the desired design while keeping cost and maintenance requirements as low as possible?

• A. Create two extra IIS Sites, bind the certificates in IIS manager, copy the StoreFront configurations to the two new IIS Sites, and use a text editor to configure all three StoreFront Stores.
• B. Deploy two extra virtual servers, bind the certificates in IIS manager, and install StoreFront again on each new virtual server.
• C. Create two extra IIS Sites, bind the certificates in IIS manager, copy the StoreFront configuration to the two new IIS Sites, and use the StoreFront console to configure all three StoreFront Stores.
• D. Create two extra IIS Sites, bind the certificates in IIS manager, use PowerShell to deploy additional Stores to the two new IIS Sites, and use a text editor to configure all three StoreFront Stores.

Answer: C

NEW QUESTION 4
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment. The customer previously installed all applications locally on managed laptops and desktops but is willing to evaluate other application delivery methods as part of the new deployment. The environment will be standardized on Windows 10 and Windows Server 2021 for the Virtual Delivery Agent (VDA) machines.
As part of an application analysis performed earlier in the project, the information shown in the Exhibit was collected regarding one of the required applications.
Click the Exhibit button to view the information.

Additionally, the customer has the following objectives:
Minimize the amount of additional infrastructure components.
Utilize thin clients as endpoints in order to reduce costs.
Users should NOT have direct access to the thin client operating system. How should the architect install the application?

• A. Directly on a VDA machine image and accessed through a virtual desktop session
• B. On an Application Layer using Citrix App Layering and included in a layered image and accessed through a virtual desktop session
• C. Directly on endpoint devices and included in a virtual desktop session using the Local App Access feature
• D. Stream it to a VDA machine using Microsoft App-V and accessed through a virtual desktop session
• E. On an Application Layer using Citrix App Layering then presented to assigned users as an Elastic Layer during a virtual desktop session

Answer: B

NEW QUESTION 5
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment. Currently, the environment is configured with two locations with identical XenDesktop Sites. Each Site has two Delivery Controllers, two StoreFront servers, and one NetScaler high availability pair. The same applications have been
published from both Sites for all the users. Two Zones (Zone A and Zone B) are configured in each Site with one Controller in each zone. The Microsoft Exchange server is only accessible from Virtual Delivery Agent (VDA) machines in Zone A in each Site.
The following access requirements have been identified:
Users should have a single URL when accessing resources from different Sites.
Users should always connect to the datacenter closest to their location.
Applications added to Favorites within Citrix Receiver should be retained when accessed from different Sites.
Launched applications and desktops should always connect through a local NetScaler.
No duplication of applications published from different Sites.
Microsoft Outlook should always launch in Zone A.
What should the architect recommend to ensure that Microsoft Outlook always launches from Zone A for every user?

• A. Configure zone preference based on user location.
• B. Configure Zone A as the application home zone for Microsoft Outlook.
• C. Move a Controller from Zone B to Zone A.
• D. Designate Zone A as the home zone for all users.

Answer: A

NEW QUESTION 6
Scenario: A Citrix Architect is designing a XenDesktop environment. The Engineer group uses graphical applications which require the use of Intel Iris Pro GPUs.
Which two hypervisors can the architect select for this environment? (Choose two.)

• A. XenServer 6.5
• B. Microsoft Hyper-V Server 2012 R2
• C. XenServer 7.0
• D. VMware vSphere 5.5
• E. VMware vSphere 6.0

Answer: BE

NEW QUESTION 7
Reduce costs

Answer:

NEW QUESTION 8
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment. While deploying Optimal HDX Routing for the customer, the architect makes the following configurations:
Authentication Gateway - AuthGW – Logon.workspace.com - Authentication only
New York Gateway - NYCGW – Nycgw.workspace.com - HDX Routing only
San Francisco Gateway - SFOGW – Sfogw.workspace.com - HDX Routing only Click the Exhibit button to view further details about the configuration.

Upon investigation of the load on the NetScalers, the architect determines that both internal and external HDX traffic flow through the NetScaler Gateways and the NetScalers are running at capacity.
Which PowerShell commandlet and parameter can help the architect address this issue until more NetScaler resources are procured?

• A. Set-DSOptimalGatewayForFarms -onDirectAccess=false
• B. Set-STFCitrixAGBasicOptions -onDirectAccess=true
• C. Set-STFCitrixAGBasicOptions -onDirectAccess=false
• D. Set-DSOptimalGatewayForFarms -onDirectAccess=true

Answer: A

NEW QUESTION 9
Scenario: After a recent security assessment, a Citrix Architect recommends blocking unnecessary peripheral types by disabling the associated HDX channels. Currently, the environment is intended to support the peripheral types listed in the Exhibit.
Click the Exhibit button to view the supported peripheral types.

Which four HDX virtual channels should the architect disable, based on the peripherals required in the environment? (Choose four.)

• A. SmartCard
• B. TWI
• C. Print
• D. ClientAudio
• E. GenericUSB
• F. TwainRdr
• G. Multimedia

Answer: ACDE

NEW QUESTION 10
Scenario: A Citrix Architect wants to set up double-hop access for an existing XenApp and XenDesktop Site. All communication across DMZ 1, DMZ 2, and the Internal Network is encrypted over port 443. The architect has proposed the design shown in the Exhibit, where DMZ 1 has NetScaler Gateway 1 and DMZ 2 has NetScaler Gateway 2 and StoreFront.
Click the Exhibit button to view the design.

Which two sets of ports should the architect request to enable on Firewall 2?

• A. Port 443 outbound and Port 1494/2598 inbound
• B. Port 443 outbound and Port 80 inbound
• C. Port 443 outbound and Port 443 inbound
• D. Port 443 outbound and Port 389/636 inbound

Answer: D

NEW QUESTION 11
Scenario: A Citrix Architect is designing a XenDesktop environment. The Engineer group uses graphical applications which require the use of AMD hardware shared virtualized GPU. Which two hypervisors can the architect select? (Choose two.)

• A. XenServer 6.5
• B. VMware vSphere 5.5
• C. XenServer 7.0
• D. VMware vSphere 6.0
• E. Microsoft Hyper-V Server 2012 R2

Answer: AC

NEW QUESTION 12
Scenario: A large retail environment includes a StoreFront server group with two servers, each with 2 vCPUs and 4 GB of RAM. The server group handles about 25,000 user connections per hour, with a majority of the users accessing the environment using native Receiver. Workspace Control has been disabled for the environment.
A Citrix Architect learns that the company will soon merge with another retail chain. The XenApp and XenDesktop environment must double its capacity, and the StoreFront server group is expected to handle about 40,000 user connections per hour.
What should the architect do to meet the expected load while maintaining high availability with optimal resource allocation for the StoreFront component?

• A. Add a third StoreFront server with 2 vCPUs and 4 GB of RAM.
• B. Allocate an additional 2 vCPUs to each existing StoreFront server.
• C. Train users to begin accessing the environment using Receiver for Web.
• D. Allocate an additional 2 GB of RAM to each existing StoreFront server.
• E. Enable Workspace Control for all StoreFront stores.

Answer: E

NEW QUESTION 13
Scenario: A Citrix Architect needs to assess a XenApp and XenDesktop environment. The XenApp and XenDesktop diagram in the Exhibit gives details about the current Site and Zone design.
Click the Exhibit button to view the diagram.



Which statement is correct if all the Delivery Controllers in the Primary Zone fail?

• A. Satellite Zone 2 will be promoted and the Primary Zone Virtual Delivery Agent (VDA) machines will register within Satellite Zone 2.
• B. Virtual Delivery Agent (VDA) machines in the Primary Zone will register within Satellite Zone 1.
• C. Virtual Delivery Agent (VDA) machines in the Primary Zone will register within Satellite Zone 2.
• D. Virtual Delivery Agent (VDA) machines in the Primary Zone will NOT register within Satellite Zone 1 or Satellite Zone 2.

Answer: A

NEW QUESTION 14
Scenario: A Citrix Architect has implemented a multi-location profile strategy as part of a large XenApp and XenDesktop solution. The architect needs to implement a single policy that sets the profile path for all users.
New York users – Server:NYC-FS.company.lan – Share: NYC-Profiles$
Miami users – Server:MIA-FS.company.lan – Share: MIA-Profiles$
San Francisco users – Server:SFO-FS.company.lan – Share: SFO-Profiles$ The architect has proposed the usage of the following path for all users:
\#Loc#-FS.company.lan#Loc#-Profiles$#sAMAccountName#%ProfileVer%
What does the architect need to define in order to use the above path for all users as the profile location?

• A. A Loc variable using the Current-Location attribute
• B. A new attribute called Loc using Active Directory Explorer
• C. A user environment variable Loc using a login script
• D. A DFS-ROOT variable per datacenter and incorporate the user environment variable %homeshare%

Answer: C

NEW QUESTION 15
Scenario: A Citrix Architect is implementing a new XenApp and XenDesktop environment. The customer has stated the following requirements:
All users must be able to aggregate resources from all Sites.
Both Sites should be treated as one equivalent farm set.
User connections should be directed to the New York Site with failover to San Francisco. Click the Exhibit button to view the StoreFront configurations.
Exhibit 1

Exhibit 2

Based on the configurations, requirement 1 is ____, requirement 2 is ____, and requirement 3 is ____.
(Choose the correct option to complete the sentence.)

• A. met; met; NOT met
• B. NOT met; NOT met; NOT met
• C. NOT met; met; NOT met
• D. met; NOT met; NOT met
• E. met; NOT met; met
• F. met; met; met
• G. NOT met; met; met

Answer: E

NEW QUESTION 16
Scenario: A Citrix Architect is reviewing a XenApp and XenDesktop design for an environment with multiple Active Directory forests.
Click the Exhibit button to view the design details.



Which risk should the architect highlight to the customer, based on the details listed in the Exhibit?

• A. The SupportMultipleForest registry key is NOT supported.
• B. The Active Directory trust method is NOT supported.
• C. The Active Directory functional level is NOT supported.
• D. The DNS lookup strategy is NOT supported.

Answer: C