Oracle 1Z0-404 Exam Questions 2021

NEW QUESTION 1
What configuration step is required for booting the SessionBorder Controller from an external FTP server?

• A. Navigate to the bootparams configuration branch and set the host inet field to the IP address of the external BOOTP Server from which the Session Border Controller can boot.
• B. Navigate to the system configuration branch and set the ip address field of the wancom1 management interface.
• C. Navigate to the bootparams configuration branch and set the ip address field of the destination SIP device with which the Session Border Controller needs to interact.
• D. Navigate to the system configuration branch and set the ip address field of the wancom0 management interface.
• E. Navigate to the bootparams configuration branch, set the host inet or Host IP, FTP username, and FTP password for the external FTP Server in which the image file resides.

Answer: C

NEW QUESTION 2
Upon issuing the done command, you getan Error 409.
Which two options explain this error? (Choose two.)

• A. You are trying to create an element with a unique identifier that already exists.
• B. The configuration element you are creating is corrupted.
• C. The element you are trying to save doesnot exist.
• D. There is an internal server error.
• E. You are trying to create a second instance of a single-instance configuration element.

Answer: AE

NEW QUESTION 3
Which three statements are true about SIP, per RFC 326? (Choose three.)

• A. SIP does not provide for resource reservation.
• B. SIP defines native methods for negotiating media streams.
• C. A SIP transaction occurs between a client and a server.
• D. To set up a voice session, SIP relies on protocols such as SDP and RTP.
• E. SIP signaling can only be used for voice over IP thereby limiting its use as a general signaling protocol.

Answer: CDE

NEW QUESTION 4
You were working with the Session Border Controller in configuration mode and you forgot toclose your session. Your colleague who connected after you left says that he cannot enter into configuration mode.
Why is your colleague not able to configure the Session Border Controller?

• A. The Session Border Controller does not allow more than one configuration session within 24 hours.
• B. The Session Border Controller does not support Telnet/SSH timeouts.
• C. The Session Border Controller supports only one simultaneous configuration session, and the Telnet/SSH timeouts are set to 0.
• D. The Session Border Controller supports only 10 simultaneous configuration sessions.
• E. The Session Border Controller supports only five simultaneous Telnet/SSH sessions.

Answer: C

NEW QUESTION 5
Which SIP headers in an incoming SIP message to the Session Border Controller are used by a local-policy configuration element for routing?

• A. From and To headers
• B. From header and Request-URI
• C. Call-Id header
• D. Contact header
• E. Via and To headers.

Answer: D

NEW QUESTION 6
When provisioning the redundancy-configuration, the peer name for each of the peers in a High Availability configuration must also be defined in each system’s ______.

• A. hostname parameter under the sip-configconfiguration element
• B. hostname parameter under the account-config configuration element
• C. hostname parameter under the bootparam configuration branch
• D. target name parameter under the bootparam configuration branch
• E. hostname parameter under the system-config configuration element

Answer: E

NEW QUESTION 7
You configured theSession Agent Group (SAG) element. You want the Session Agent to be selected in the order in which they are listed in the destination list, with each agent selected in turn, one per session.
How would you accomplish this?

• A. Navigate to the session-agentconfiguration element and set the strategy parameter to sequential.
• B. Navigate to the session-agent configuration element and set the strategy parameter to propdist.
• C. Navigate to the session-agent configuration element and set the strategy parameter tohunt.
• D. Navigate to the session-agent configuration element and set the strategy parameter to roundrobin.
• E. Navigate to the session-agent configuration element and set the strategy parameter to leastbusy.

Answer: D

NEW QUESTION 8
In which two ways can you remove support for telnet from a media interface? (Choose two.)

• A. Navigate to the network-interface configuration element and run the delete-hip-ip <IP address> command.
• B. Navigate to the phy-interface configuration element and run the remove-hip-ip <IP address> command.
• C. Navigate to the network-interface configuration element and run the remove-telnet-ip <IP address> command.
• D. Navigate to the network-interface configuration element and run the remove-hip-ip <IP address> command.
• E. Navigate to the phy-interface configurationelement and run the remove-telnet-ip <IP address> command.

Answer: AC

NEW QUESTION 9
A steering pool defines _____.

• A. a range of ports used to route media flows as they egress the Session Border Controller
• B. an IP address and port the Session Border Controller uses for steering media to the external media server
• C. an IP address and range of ports the Session Border Controller will use to declare itself as the destination for media flows in a session
• D. a range of IP addresses and a pool of ports the Session Border Controller will use to declare itself as the destination for all subsequent media flows in a dialog
• E. arange of IP addresses used to route media flows as they egress the Session Border Controller

Answer: C

NEW QUESTION 10
You wantto configure the maximum duration in seconds of any session in the Session Border Controller.
How would you accomplish this?

• A. Navigate to the media-manager configuration element and configure the max-signaling- bandwidth parameter.
• B. Navigate to the media-manager configuration element and configure the flow-time-limit parameter.
• C. Navigate to the sip-config configuration element and configure the operation-mode parameter.
• D. Navigate to the sip-config configuration element and configure theflow-time-limit parameter.
• E. Navigate to the media-manager configuration element and configure the latching parameter.

Answer: C

NEW QUESTION 11
You are configuring steering pools. After executing the done command, you get this error message:
error 409 saving configuration SteeringPool. Identify the cause ofthe error.

• A. The realm-id parameter value of the steering-pool refers to a realm-config element that already exists in the configuration.
• B. The ip-address parameter of the steering-pool has the same value as the address parameter of a sip-port configuration element.
• C. The realm-id parameter value of the steering-pool refers to a realm-config element that does not exist in the configuration.
• D. Another steering-pool configuration element with same ip-address, realm-id, start-port, and end-port parameters values already exists in the configuration.
• E. Another steering-pool configuration element with same ip-address and realm-id but with different start-port and end-port parameters values already exists in the configuration.

Answer: E

NEW QUESTION 12
You need to configure the Session Border Controller toperform load balancing between two downstream SIP proxies.
Which option shows the configuration elements that you should configure for the load balancing feature?

• A. session-router and router-group
• B. realm-config and enum-group
• C. group-policy andload-policy
• D. proxy and proxy-pool
• E. local-policy and session-group

Answer: A

NEW QUESTION 13
Which statement is true about Session Border Controller architectures andrealm bridging?

• A. The Hosted NAT Traversal (HNT) architecture focuses on the border point between two different service provider networks, both in the home realm.
• B. The Hosted IP architecture focuses on the border point between one enterprise network realm and one service provider network realm.
• C. The Access-backbone architecture focuses on the border point between two backbone realms.
• D. The Peering architecture focuses on the border point between two different service provider networks and theirrealms.
• E. The Gateway architecture Focuses on the border point between one enterprise network realm and one service provider network realm.

Answer: B

NEW QUESTION 14
Which two statements describe the functions of Session Border Controllers? (Choose two.)

• A. they replace typical edge routers and firewalls in order to provide a unified network border forsignaling and media control
• B. they are session-aware devices that enable control of end-to-end interactive communications across IP network borders
• C. they are based on the Windows operating system
• D. they provide routing functions for IP, TCP, and SMTPusing application parameters
• E. they provide signaling proxy functions for SIP, H.323, and MGCP, which includes access control, signaling constraints, and topology hiding

Answer: AE

NEW QUESTION 15
You used the no command to delete a configuration element. Whichstatement is true?

• A. The deletion is lost on immediate reboot.
• B. The deletion is reflected when viewing the running configuration.
• C. The deletion takes effect immediately in the saved configuration.
• D. The deletion always requires a reboot to take effect.
• E. The deletion requires auto-save enabled.

Answer: A

NEW QUESTION 16
Which two statements are correct about configuring realms and their corresponding interfaces? (Choose two.)

• A. You can associate multiple home realms with a single network interface.
• B. You can configure more than one SIP interface per realm.
• C. Although you can use both TCP and UDP concurrently as the transport protocol, youcan only have one SIP interface per realm.
• D. You can associate multiple realms with a single networkinterface.
• E. You can associate multiple network interfaces with a single realm only when either TCP or UDP is used as the transport protocol.

Answer: CD