we provide Exact Cisco 125 200 download which are the best for clearing 200 125 ccna test, and to get certified by Cisco CCNA Cisco Certified Network Associate CCNA (v3.0). The ccna 200 125 ebook Questions & Answers covers all the knowledge points of the real ccna 200 125 torrent exam. Crack your Cisco cisco 200 125 Exam with latest dumps, guaranteed!
2026 New 200-125 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/200-125/
P.S. Exact 200-125 training tools are available on Google Drive, GET MORE: https://drive.google.com/open?id=1OzZ4eFC1XI8L79-k0OIZGdrxMXtPVcLb
New Cisco 200-125 Exam Dumps Collection (Question 7 - Question 16)
Question No: 7
Which three statements about DTP are true? (Choose three.)
A. It is enabled by default.
B. It is a universal protocol.
C. It is a proprietary protocol.
D. It is disabled by default.
E. It is a Layer 3-based protocol.
F. It is a Layer 2-based protocol.
Answer: A,C,F
Question No: 8
On which type of device is every port in the same collision domain?
A. a router
B. a Layer 2 switch
C. a hub
Answer: C
Explanation:
Collision domain
A collision domain is, as the name implies, a part of a network where packet collisions can occur. A collision occurs when two devices send a packet at the same time on the shared network segment. The packets collide and both devices must send the packets again, which reduces network efficiency. Collisions are often in a hub environment, because each port on a hub is in the same collision domain. By contrast, each port on a bridge, a switch or a router is in a separate collision domain.
Question No: 9
Which two commands can you enter to verify that a configured NetFlow data export is operational? (Choose two.)
A. show ip flow export
B. show ip cache flow
C. ip flow ingress
D. ip flow egress
E. interface ethernet 0/0
F. ip flow-export destination
Answer: A,B
Question No: 10
By default, how many MAC addresses are permitted to be learned on a switch port with port security enabled?
A. 8
B. 2
C. 1
D. 0
Answer: C
Question No: 11
Which command can be used from a router to verify the Layer 3 path to a host?
A. tracert address
B. traceroute address
C. telnet address
D. ssh address
Answer: B
Question No: 12
What is the effect of using the service password-encryption command?
A. Only the enable password will be encrypted.
B. It will encrypt all current and future passwords.
C. It will encrypt the secret password and remove the enable secret password from the configuration.
D. Only the enable secret password will be encrypted.
E. Only passwords configured after the command has been entered will be encrypted.
Answer: B
Explanation:
Enable vty, console, AUX passwords are configured on the Cisco device. Use the show run command to show most passwords in clear text. If the service password-encryption is used, all the passwords are encrypted. As a result, the security of device access is improved.
Question No: 13
Which component of a routing table entry represents the subnet mask?
A. routing protocol code
B. prefix
C. metric
D. network mask
Answer: D
Explanation:
IP Routing Table Entry Types
An entry in the IP routing table contains the following information in the order presented: Network ID.The network ID or destination corresponding to the route. The network ID can be class-based, subnet, or supernet network ID, or an IP address for a host route. Network Mask.The mask that is used to match a destination IP address to the network ID. Next Hop.The IP address of the next hop.
Interface.An indication of which network interface is used to forward the IP packet. Metric.A number used to indicate the cost of the route so the best route among possible multiple routes to the same destination can be selected. A common use of the metric is to indicate the number of hops (routers crossed) to the network ID.
Routing table entries can be used to store the following types of routes:
Directly Attached Network IDs.Routes for network IDs that are directly attached. For directly attached networks, the Next Hop field can be blank or contain the IP address of the interface on that network.
Remote Network IDs.Routes for network IDs that are not directly attached but are available across other routers. For remote networks, the Next Hop field is the IP address of a local router in between the forwarding node and the remote network.
Host Routes.A route to a specific IP address. Host routes allow routing to occur on a per-
IP address basis. For host routes, the network ID is the IP address of the specified host and the network mask is 255.255.255.255.
Default Route.The default route is designed to be used when a more specific network ID or host route is not found. The default route network ID is 0.0.0.0 with the network mask of 0.0.0.0.
Question No: 14
You enter the show ipv6 route command on an OSPF device and the device displays a route. Which conclusion can you draw about the environment?
A. OSPF is distributing IPv6 routes to BGP.
B. The router is designated as an ABR.
C. The router is designated as totally stubby.
D. OSPFv3 is in use.
Answer: A
Question No: 15
What is the authoritative source for an address lookup?
A. a recursive DNS search
B. the operating system cache
C. the ISP local cache
D. the browser cache
Answer: A
Question No: 16
CORRECT TEXTA corporation wants to add security to its network. The requirements are:
u2711 Host C should be able to use a web browser (HTTP) to access the Finance Web Server.
u2711 Other types of access from host C to the Finance Web Server should be blocked.
u2711 All access from hosts in the Core or local LAN to the Finance Web Server should be blocked.
u2711 All hosts in the Core and on local LAN should be able to access the Public Web Server.
You have been tasked to create and apply anumbered access listto a single outbound interface. This access list can contain no more thanthreestatements that meet these requirements.
Access to the router CLI can be gained by clicking on the appropriate host.
u2711 All passwords have been temporarily set to u201cciscou201d.
u2711 The Core connection uses an IP address of 198.18.209.65.
u2711 The computers in the Hosts LAN have been assigned addresses of 192.168.78.1 u2013 192.168.78.254.
u2711 host A 192.168.78.1
u2711 host B 192.168.78.2
u2711 host C 192.168.78.3
u2711 host D 192.168.78.4
u2711 The Finance Web Server has been assigned an address of 172.22.146.17.
u2711 The Public Web Server in the Server LAN has been assigned an address of 172.22.146.18.
Answer:
Please see below explanation part for details answer steps:
Explanation:
We should create an access-list and apply it to the interface that is connected to the Server LAN because it can filter out traffic from both S2 and Core networks. To see which interface this is, use the u201cshow ip int briefu201d command:
From this, we know that the servers are located on the fa0/1 interface, so we will place our numbered access list here in the outbound direction.
Corp1#configure terminal
Our access-list needs to allow host C u2013 192.168125.3 to the Finance Web Server 172.22.109.17 via HTTP (port 80), so our first line is this:
Corp1(config)#access-list 100 permit tcp host 192.168.125.3 host 172.22.109.17 eq 80
Then, our next two instructions are these:
u2711 Other types of access from host C to the Finance Web Server should be blocked.
u2711 All access from hosts in the Core or local LAN to the Finance Web Server should be blocked.
This can be accomplished with one command (which we need to do as our ACL needs to
be no more than 3 lines long), blocking all other access to the finance web server:
Corp1(config)#access-list 100 deny ip any host 172.22.109.17
Our last instruction is to allow all hosts in the Core and on the local LAN access to the Public Web Server (172.22.109.18)
Corp1(config)#access-list 100 permit ip host 172.22.109.18 any Finally, apply this access-list to Fa0/1 interface (outbound direction) Corp1(config)#interface fa0/1
Corp1(config-if)#ip access-group 100 out
Notice: We have to apply the access-list to Fa0/1 interface (not Fa0/0 interface) so that the access-list can filter traffic coming from both the LAN and the Core networks.
To verify, just click on host C to open its web browser. In the address box type http://172.22.109.17 to check if you are allowed to access Finance Web Server or not. If your configuration is correct then you can access it.
Click on other hosts (A, B and D) and check to make sure you canu2021t access Finance Web Server from these hosts. Then, repeat to make sure they can reach the public server at 172.22.109.18. Finally, save the configuration
Corp1(config-if)#end
Corp1#copy running-config startup-config
100% Far out Cisco 200-125 Questions & Answers shared by Thedumpscentre, Get HERE: http://www.thedumpscentre.com/200-125-dumps/ (New 890 Q&As)