Our pass rate is high to 98.9% and the similarity percentage between our 200 355 wifund study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Cisco ccna wireless 200 355 official cert guide pdf exam in just one try? I am currently studying for the Cisco 200 355 dumps exam. Latest Cisco ccna wireless 200 355 pdf download Test exam practice questions and answers, Try Cisco 200 355 wifund pdf Brain Dumps First.


2026 New 200-355 Exam Dumps with PDF and VCE Free: https://www.surepassexam.com/200-355-exam-dumps.html

Q1. An engineer is trying to convert the IP Address of the wireless controller to amend DHCP Option 43 configuration on the DHCP server. What mathematical format must the IP address of the Wireless controller be converted to in order to function correctly? 

A. Hexadecimal 

B. Binary 

C. Decimal 

D. ASCII 

Answer: A 

Q2. When the enterprise-based authentication method is used for WPA2, a bidirectional handshake exchange occurs between the client and the authenticator. 

Which five options are results of that exchange being used on a controller-based network? (Choose five.) 

A. a bidirectional exchange of a nonce used for key generation 

B. binding of a Pairwise Master Key at the client and the controller 

C. creation of the Pairwise Transient Key 

D. distribution of the Group Transient Key 

E. distribution of the Pairwise Master key for caching at the access point 

F. proof that each side is alive 

Answer: A,B,C,D,F 

Q3. Refer to the exhibit. 

Which action allows you to view a summary count by alarm types for the displayed total of 11 alarms? 

A. Choose Monitor > Alarms 

B. Click the Security tab 

C. Click a respective number in the Alarm Summary 

D. Click the Alarm Summary blue arrow 

E. Choose Home (house icon) > Alarm Summary 

Answer: D 

Q4. Refer to the exhibit. 

What is the meaning of the inverted orange triangle (marked "0") in the Alarm Summary tab of Cisco WCS? 

A. number of major alarms 

B. number of minor alarms 

C. number of critical alarms 

D. number of system alarms 

Answer: A 

Q5. Which two statements about the Cisco WLC and AP code upgrade when 7.0 is running are true? (Choose two.) 

A. The AP can download and run new code only after a Cisco WLC reboot causes the AP discovery and join. 

B. The AP can download new code before the Cisco WLC reboot, but only if the AP is configured the CLI via SSH. 

C. The AP can download new code before Cisco WLC reboot if it is configuring the Cisco WLC directly using the GUI via HTTP or HTTPS. 

D. The Cisco WLC defaults to booting newer code, but it can boot older backup code only from the CLI configuration. 

E. The Cisco WLC can boot either primary or backup code configured from the GUI. 

F. The Cisco WLC can download only a single code at a time for reboot. 

Answer: C,E 

Q6. Which three options are limitations when configuring basic security on an autonomous AP when using the express security page setup? (Choose three.) 

A. You need multiple SSIDs. 

B. Delete all the SSIDs. 

C. Edit the SSIDs. 

D. Use multiple authentication servers. 

E. Use the same SSID on both radios. 

F. Use a single SSID on a single radio. 

Answer: C,D,E 

Q7. Which official port should be used when configuring external RADIUS authentication on a Cisco WLC version 7.0? 

A. 49 

B. 1645 

C. 1646 

D. 1812 

E. 1813 

Answer: D 

Q8. A client is attached to the Cisco Unified Wireless Network using controllers. 

When the client is using WPA2 and EAP authentication, where are the wireless encryption keys located during the active user session? (Choose two.) 

A. On the access point 

B. On the RADIUS server 

C. On the Cisco WCS 

D. On the client 

E. On the Cisco WLC 

Answer: A,D 

Q9. Which two statements about beacon frames used by access points are true? (Choose two.) 

A. They contain SSIDs if this feature is enabled. 

B. They provide vendor proprietary information. 

C. They are another name for an associated request. 

D. They are sent in response to a probe frame. 

E. They include ATIM window information for power save operations. 

Answer: A,B 

Q10. You have a small organization with multiple Cisco WCS servers. Management has become cumbersome and you are planning to deploy Cisco WCS Navigator. 

When the Cisco WCS Navigator has been deployed, how are the existing Cisco WCS servers added to the Cisco WCS Navigator, which software versions are supported, and which protocol(s) do they use to communicate with Navigator? 

A. Cisco WCS Navigator searches the enterprise intranet to locate the existing Cisco WCS servers and adds them automatically using SOAP as long as there is only a difference of one version or less between Cisco WCS and WCS Navigator. 

B. Each existing Cisco WCS server must be added manually and use SOAP/HTTP to communicate with the Cisco WCS Navigator platform as long as the software versions of Cisco WCS and Cisco WCS Navigator are the same. 

C. Cisco WCS must be on the same software version as Cisco WCS Navigator and each Cisco WCS server is added automatically using XML over HTTP. 

D. When Cisco WCS Navigator is added, all the Cisco WCS servers must be added manually, each system must use the same software release as Navigator, and the Cisco WCS communicates with Cisco WCS Navigator by using SOAP/XML over HTTPS. 

Answer: D