All About Approved 2V0-41.20 Exam Price

NEW QUESTION 1
Which is correct when deploying a NSX Edge in a KVM only environment?

• A. deploy NSX Edge VM with QCOW2 image
• B. deploy NSX Edge VM with ISO image
• C. deploy NSX Edge on a bare-metal server
• D. deploy NSX Edge VM with OVF template

Answer: C

NEW QUESTION 2
A user is assigned these two roles in NSX Manager:
LB Admin
Network Engineer
What privileges does this user have in the system?

• A. read permissions on all networking services and full access permissions on load balancing features
• B. full access permissions on all networking services and full access permissions on load balancing features
• C. full access permissions on all networking services and read permissions on load balancing features
• D. read permissions on all networking services and read permissions on load balancing features

Answer: B

NEW QUESTION 3
An NSX administrator noticed that the nsxcli command times out after 600 secs of idle time. Which CLI command disables the nsxcli time out value on NSX Manager?

• A. set cli-timeout 0
• B. set cli-timeout enabled
• C. set cli-timeout disabled
• D. set cli-timeout 1

Answer: A

Explanation:
"https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264
https://www.virten.net/2020/06/quick-tip-remove-nsx-t-ssh-and-http-session-timeout/

NEW QUESTION 4
Which Network and Security virtualization solution provides network hybridity and mobility?

• A. VMware HCX
• B. VMware Tanzu Service Mesh
• C. NSX Advanced Load Balancer
• D. NSX Intelligence

Answer: A

NEW QUESTION 5
An NSX administrator has been tasked with deploying a NSX Edge Virtual machine through an ISO image. Which virtual network interface card (vNIC) type must be selected while creating the NSX Edge VM allow participation in overlay and VLAN transport zones?

• A. e1000
• B. VMXNET2
• C. VMXNET3
• D. Flexible

Answer: C

NEW QUESTION 6
In a NSX-T Data Center environment, an administrator is observing low throughput and congestion between the Tier-0 Gateway and the upstream physical routers.
Which two actions could address low throughput and congestion? (Choose two.)

• A. Deploy Large size Edge node/s.
• B. Configure ECMP on the Tier-0 gateway.
• C. Configure NAT on the Tier-0 gateway.
• D. Add an additional vNIC to the NSX Edge node.
• E. Configure a Tier-1 gateway and connect it directly to the physical routers.

Answer: AB

NEW QUESTION 7
Which three protocols could an NSX administrator use to transfer log messages to a remote log server? (Choose three.)

• A. SSL
• B. HTTPS
• C. TLS
• D. UDP
• E. SSH
• F. TCP

Answer: CDF

Explanation:
https://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/certification/vmware-2vo-41.20-exam-p

NEW QUESTION 8
A customer has a network where BGP has been enabled and the BGP neighbor is configured on the Tier-0 Gateway. A NSX-T Data Center administrator used the get logical-routers command to retrieve this information:

Which two commands must be executed to check BGP neighbor status? (Choose two.)

• A. vrf 3
• B. vrf 1
• C. vrf 4
• D. sa-nsxedge-01(tier1_sr)> get bgp neighbor
• E. sa-nsxedge-01(tier0_sr)> get bgp neighbor
• F. sa-nsxedge-01(tier0_dr)> get bgp neighbor

Answer: AE

NEW QUESTION 9
Which CLI command is used to disable SSH timeout on NSX Manger and NSX Edge nodes?

• A. set cli ssh timeout 0
• B. set esxcli ssh session off
• C. set cli-timeout 0
• D. nsxcli ssh session on

Answer: C

NEW QUESTION 10
Which CLI command on NSX Manager and NSX Edge is used to change NTP settings?

• A. set time-server
• B. get timezone
• C. set ntp-server
• D. set timezone

Answer: C

NEW QUESTION 11
Which profile must be attached to the ESXi cluster to prepare the host for NSX-T Data Center?

• A. Transport Node Profile
• B. Uplink Profile
• C. Switching Profile
• D. Host Profile

Answer: A

NEW QUESTION 12
A security administrator needs to configure a firewall rule based on the domain name of a specific application. Which field in a distributed firewall rule does the administrator configure?

• A. Profile
• B. Source
• C. Service
• D. Policy

Answer: A

NEW QUESTION 13
How is the RouterLink port created between a Tier-1 Gateway and Tier-0 Gateway?

• A. Automatically created when Tier-1 is created.
• B. Manually create a Segment and connect to both Tier-1 and Tier-0 Gateways.
• C. Manually create a Logical Switch and connect to bother Tier-1 and Tier-0 Gateways.
• D. Automatically created when Tier-1 is connected with Tier-0 from NSX UI.

Answer: D

Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-3F163DEE-1EE6-4D80-B

NEW QUESTION 14
Refer to the exhibit.

Which NAT type must the NSX-T Data Center administrator create on the Tier-0 or Tier-1 Gateway to allow Web VM to initiate communication with public networks?

• A. SNAT
• B. Reverse NAT
• C. DNAT
• D. 1:1 NAT

Answer: A

NEW QUESTION 15
How does Traceflow tool identify issues in a network?

• A. Compares intended network state in the control plane with Tunnel End Point (TEP) keepalives in the data plane.
• B. Compares the management plane configuration states containing control plane traffic and error reporting from transport node agents.
• C. Injects synthetic traffic into the data plane and observes the results in the control plane.
• D. Injects ICMP traffic into the data plane and observes the results in the control plane.

Answer: C

NEW QUESTION 16
Which discovery protocol is supported for hypervisor transport nodes?

• A. Adobe Real-time CDP
• B. Neighbor Discovery Protocol
• C. Cisco Discovery Protocol
• D. Link Layer Discovery Protocol

Answer: D

NEW QUESTION 17
......