Cause all that matters here is passing the Cisco 300 070 ciptv1 exam. Cause all that you need is a high score of cisco 300 070 Implementing Cisco IP Telephony & Video, Part 1 v1.0 exam. The only one thing you need to do is downloading Testking 300 070 ciptv1 pdf exam study guides now. We will not let you down with our money-back guarantee.
2026 New 300-070 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-070/
Q1. Which three characteristics of a video stream require the implementation of QoS? (Choose three.)
A. variable packet rate
B. constant bandwidth
C. small packets
D. high MTU
E. high packet rate
Answer: A,D,E
Q2. Which two options are IOS conference bridge types in CUCM? (Choose two)
A. CiscoIOS Enhanced Conference Bridge
B. CiscoIOS Standard Conference Bridge
C. CiscoIOS Software Conference Bridge
D. CiscoIOS Hardware Conference Bridge
E. Cisco IOS Conference Bridge
Answer: A,E
Explanation: Reference:
Page 367
Cisco Unified Communications Manager Administration Guide, Release 10.0(1)
Q3. Refer to the exhibit.
What is the command to place the static IP address by CLI in the CiscoTelePresence MSE 8000?
A. MSE 8050: static 0 10.10.2.13 255.255.255.255 10.10.2.1 200.87.100.10 200.87.100.20.
B. MSE 8050: static 0 10.10.2.13 255.255.255.0 10.10.2.1 200.87.100.10 200.87.100.20.
C. MSE 8050: static 1 10.10.2.13 255.255.255.0 10.10.2.1 200.87.100.10 200.87.100.20.
D. MSE 8050: static ip 0 10.10.2.13 255.255.255.0 10.10.2.1 200.87.100.10 200.87.100.20.
Answer: B
Q4. Refer to the exhibit.
Which party has a SIP B2BUA role in the call?
A. 172.17.4.100
B. 10.100.4.65 and 172.17.4.100
C. 10.100.4.65
D. None of the parties has a B2BUA role in the call.
E. 10.100.4.68 and 10.100.4.65
Answer: C
Q5. Which option describes how you add software conference bridges to Cisco Unified CommunicationsManager?
A. By adding a Cisco Unified CM server to the cluster.
B. By adding a software conference bridge using Conference Bridge Configuration.
C. By installing DSP to a Cisco Unified CM server.
D. By reassigning other media resources to conference resources.
Answer: A
Q6. You are a Voice Engineer at ABC Company. You want to provision a new voice gateway for a remotesite, and you need to configure 24 channels of a T1 CAS interface. Which set is the correct set ofcommands for this configuration?
A. R1(config)# controller t1 1/0
R1(config-controller)# framing esf
R1(config-controller)# linecode b8zs
R1(config-controller)# primary-group 1 timeslot 1-24 type fxo-loop-start
B. R1(config)# controller t1 1/0
R1(config-controller)# linecode hdb3
R1(config-controller)# framing crc4
R1(config-controller)# clock source line
R1(config-controller)# ds0-group 1 timeslot 1-24 type fxo-loop-start
C. R1(config)# isdn switch-type primary-5ess
R1(config)# controller t1 t1/0
R1(config-controller)# pri-group timeslots 1-24
D. R1(config)# controller t1 1/0
R1(config-controller)# framing esf
R1(config-controller)# linecode b8zs
R1(config-controller)# clock source line
R1(config-controller)# ds0-group 1 timeslot 1-24 type fxo-loop-start
Answer: D
Explanation: Reference:
Page 9-11 http://www.cisco.com/c/en/us/td/docs/ios/voice/isdn/configuration/guide/12_4t/vi_12_4t_bo ok/
vi_imp_t1cas_voip.pdf
Q7. Which three configuration options are currently unsupported when configuring the Cisco UnifiedBorder Element for videoconferencing? (Choose three)
A. RSVP synchronization of H.323 calls.
B. Multiple logical channels per call leg.
C. H.323-to-SIP video traffic.
D. FECC support.
E. Video endpoints with different H.245 versions.
F. Dual video/picture-in-picture.
G. DSCP marking for video streams.
Answer: C,E,F
Explanation: Reference:
http://www.cisco.com/c/en/us/td/docs/ios/voice/cube/configuration/guide/15_2/vb_gw_15_2_book/vb-gwvideo.
Q8. Which three Cisco Unified CallManager configuration steps are required to support third party SIPphones? (Choose three.)
A. Configure the device in Cisco Unified CallManager.
B. Change the proxy address in the SIP phone to an IP address or the Fully Qualified Domain Name (FQDN)of Cisco Unified CallManager.
C. Associate the device with the end user.
D. Configure the phone with the TLS username and password.
E. Configure the end user in Cisco Unified CallManager.
F. Add the MAC address of the Cisco Unified CallManager server to the SIP phone configuration page.
Answer: A,C,E
Q9. The Ajax Corporation is designing an IP telephony network using Cisco MCS 7845 Series
servers, eachone capable of supporting 7500 devices. The design must meet these requirements:
-Be cost-effective
-Support up to 7500 phones
-Provide a minimal level of redundancy
A. Two Cisco Unified Communications Manager servers:
1 publisher and TFTP server combined.
1 primary subscriber.
B. Three Cisco Unified Communications Manager servers:
1 publisher and TFTP server combined.
1 primary subscriber.
1 backup subscriber.
C. Four Cisco Unified Communications Manager servers:
1 publisher.
1 TFTP server.
1 primary subscriber.
1 backup subscriber.
D. Five Cisco Unified Communications Manager servers:
1 publisher.
1 TFTP server.
1 primary subscriber.
2 backup subscribers.
Answer: B
Q10. You are performing route pattern configuration. You need to ensure that internal extensions are automatically expanded to full external phone numbers for calling line information on outgoing calls. What should you use?
A. calling extension expansion
B. called number expansion
C. external number mask of the called party
D. external phone number mask of the calling party
Answer: D