Want to know Testking 300 070 ciptv1 pdf Exam practice test features? Want to lear more about Cisco Implementing Cisco IP Telephony & Video, Part 1 v1.0 certification experience? Study Breathing Cisco cisco 300 070 answers to Renewal cisco 300 070 questions at Testking. Gat a success with an absolute guarantee to pass Cisco cisco 300 070 (Implementing Cisco IP Telephony & Video, Part 1 v1.0) test on your first attempt.
2026 New 300-070 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-070/
Q1. Every VoIP endpoint must select one specific codec. Which of these codecs is the mandatory codec?
A. G.729
B. G.728
C. G.722
D. G.711
E. H.264
Answer: D
Q2. Which protocol can Cisco Unified Communications Manager not use to monitor the status of thegateway?
A. H.323
B. SIP
C. MGCP
D. SCCP
Answer: A
Q3. Which protocol is recommended to be used between Cisco Unified Communications Manager and thevoice gateway to simplify the dial plan?
A. SIP.
B. SCCP.
C. H323.
D. RSVP.
E. MGCP.
Answer: E
Q4. Which three options are components of Media Resources Architecture? (Choose three)
A. Music on hold.
B. Media Resource Manager.
C. Media Resource Group.
D. Route list.
E. Route group
F. Media Resource Group List.
Answer: B,C,F
Explanation: Reference:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/8x/uc8x/media.html#wp11 06500
Q5. Which two codecs are the best codecs to use in WAN and LAN? (Choose two.)
A. WAN codec G.711
B. LAN codec G.729
C. WAN codec G.729
D. LAN codec G.711
Answer: C,D
Q6. You are a Voice Engineer at ABC Company. You want to provision a new voice gateway for a remotesite, and you need to configure 24 channels of a T1 CAS interface. Which set is the correct set ofcommands for this configuration?
A. R1(config)# controller t1 1/0
R1(config-controller)# framing esf
R1(config-controller)# linecode b8zs
R1(config-controller)# primary-group 1 timeslot 1-24 type fxo-loop-start
B. R1(config)# controller t1 1/0
R1(config-controller)# linecode hdb3
R1(config-controller)# framing crc4
R1(config-controller)# clock source line
R1(config-controller)# ds0-group 1 timeslot 1-24 type fxo-loop-start
C. R1(config)# isdn switch-type primary-5ess
R1(config)# controller t1 t1/0
R1(config-controller)# pri-group timeslots 1-24
D. R1(config)# controller t1 1/0
R1(config-controller)# framing esf
R1(config-controller)# linecode b8zs
R1(config-controller)# clock source line
R1(config-controller)# ds0-group 1 timeslot 1-24 type fxo-loop-start
Answer: D
Explanation: Reference:
Page 9-11 http://www.cisco.com/c/en/us/td/docs/ios/voice/isdn/configuration/guide/12_4t/vi_12_4t_bo ok/
vi_imp_t1cas_voip.pdf
Q7. Which three options are valid digit discard instructions?
A. PreAt.
B. PreDot.
C. Leading#.
D. PostAt.
E. Trailing#.
F. PostDot.
Answer: A,B,E
Explanation: Reference:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/idp/504_423/deploy/dpdg/dpDl Plns.html
Q8. Which three Cisco Unified Communications Manager settings can be used to support IP phone services? (Choose three.)
A. Device Defaults
B. Enterprise Parameters
C. IP Phone Service Configuration window
D. Common Phone Profile
E. Service Parameters
F. Phone Configuration window
Answer: B,D,F
Q9. What is the difference between policing and shaping?
A. Policing: Transmit and mark, then transmit the packets. Shaping: Buffer the exceeding packets.
B. Policing: Transmit the packets. Shaping: Buffer the exceeding packets.
C. Policing: Transmit, drop or mark, then transmit the packets. Shaping: Buffer the exceeding packets.
D. Policing: Buffer the exceeding packets. Shaping: Transmit and mark, then transmit the packets.
Answer: C
Explanation: Reference:
http://www.cisco.com/c/en/us/support/docs/quality-of-service-qos/qos-policing/19645-policevsshape.html
Q10. What is the maximum number of I080p30 HD Conference Participants if an MSE 8000 has four MSE8710 blades clustered?
A. 48
B. 180
C. 720
D. 800
Answer: A