The Far out Guide To 300-075 exam

Q1. When Cisco Extension Mobility is implemented, which CSS is used for calling privileges? 

A. The user device profile line CSS combined with the device CSS of the physical phone used to log in the extension mobility user. 

B. The user device profile device CSS combined with the line CSS of the physical phone used to log in the extension mobility user. 

C. Only the user device profile device CSS is used. 

D. The combined line/device CSS of the physical phone is used to log in the extension mobility user. 

E. The combined line/device CSS of the user device profile. 

View Answer

Q2. Refer to the exhibit. 

Which trunks would be most suitable for Connection Y? 

A. an H.225 trunk (gatekeeper-controlled) 

B. intercluster trunk (gatekeeper-controlled) 

C. a SIP trunk on the U.S. cluster and an intercluster trunk on the remote cluster 

D. intercluster trunk (nongatekeeper-controlled) 

E. No extra connections are required. As long as IP connectivity exists, you need only configure a route pattern for each site. The Cisco Unified Communications Manager will automatically forward the calls over the WAN if the destination directory number is not registered locally. 

View Answer

Q3. Which action configures CAC utilizing only Cisco Unified Communications Manager software? 

A. Configure Cisco Unified Communications Manager regions. 

B. Configure Cisco Unified Communications Manager locations. 

C. Configure Cisco Unified Communications Manager RSVP-enabled locations. 

D. Configure Cisco Unified Communications Manager MTPs. 

View Answer

Q4. Which statement is true regarding the configuration of SAF Forwarder? 

A. In a multisite dial plan, SAF Forwarders may exist in multiple autonomous systems. 

B. The client label that is configured in Cisco Unified Communications Manager must match the configuration on the SAF Forwarder router. 

C. There should not be multiple nodes of Cisco Unified Communications Manager clusters acting as SAF clients. 

D. The destination IP address must match the loopback address of the SAF router. 

View Answer

Q5. Refer to the exhibit. 

All HQ phones are configured to use HQ_MRGL and all BR phones are configured to use BR_MRGL. For the HQ phones always to use the hardware conference bridge as a first choice, which configuration should be implemented? 

A. Ensure that both the hardware and software conference bridges are listed in the HQ_MRG. Ensure that the instance ID for the hardware conference bridge is 0. 

B. Ensure that both the hardware and software conference bridges are listed in the HQ_MRG. The hardware conference bridge must be configured first. 

C. Assign the hardware conference bridge to HQ_MRG. Configure a second HQ_MRG_2 and assign the software conference bridge to it. Add both the HQ_MRG and HQ_MRG_2 to the HQ_MRGL and list the HQ_MRG first. 

D. Assign the hardware conference bridge to HQ_MRG. Configure a second HQ_MRG_2 and assign the software conference bridge to it. Configure an additional HQ_MRGL_2. Add the HQ_MRG to HQ_MRGL. Add HQ_MRG_2 to HQ_MRGL_2. The HQ_MRGL should be assigned to the HQ phones. The HQ_MRGL_2 should be assigned to the HQ device pool. 

View Answer

Q6. What is the default DSCP/PHB for TelePresence video conferencing packets in Cisco Unified Communications Manager? 

A. EF/46 

B. CS6/48 

C. AF41/34 

D. CS3/24 

E. CS4/32 

View Answer

Q7. In a distributed call processing network with locations-based CAC, calls are routed to and from intercluster trunks. Which trunk type is implemented in this network? 

A. intercluster trunk with gatekeeper control 

B. intercluster trunk without gatekeeper control 

C. SIP trunk 

D. h225 trunk 

View Answer

Q8. Refer to the exhibit. 

The exhibit shows centralized Cisco Unified Communications Manager configuration components for TEHO calls to U.S. area code 408 from the U.K. The PSTN access code for the U.K. is 9 and 001 for international calls to the U.S. To match the US-TEHO pattern +!, how should the translation pattern be configured? 

A. 9001.4085551234 with the Called Party Transformation:Discard Digits PreDotPrefix Digits Outgoing Calls: + 

B. 9.0014085551234 with the Called Party Transformation:Discard Digits PreDotPrefix Digits Outgoing Calls: +1 

C. 900.14085551234 with the Called Party Transformation:Discard Digits PreDotPrefix Digits Outgoing Calls: +1 

D. 900.14085551234 with the Called Party Transformation:Discard Digits PreDotPrefix Digits Outgoing Calls: + 

E. 001.4085551234 with the Called Party Transformation:Prefix Digits Outgoing Calls: + 

View Answer

Q9. Refer to the following exhibits. 

Users in the U.S dial Germany by calling 9011 49 followed by the remaining digits. What would be the most suitable configuration for Connection X? 

A. Configure a SIP trunk to 10.140.1.1 and a SIP route pattern +49T in Cisco Unified Communications Manager. 

B. Configure a SIP trunk to the Cisco Unified Border Element and route pattern +49T in Cisco Unified Communications Manager. 

C. configure a SIP trunk to the Cisco Unified Border Element. Configure a translation pattern for 9011.49T using DDI Predot prefix + and CSS to point to a route pattern partition +! which uses the SIP trunk. 

D. Configure a SIP trunk to the ITSP. Configure a translation pattern for 9011.49T using DDI predot prefix + and CSS to point to a route pattern partition +! which uses the SIP trunk. 

View Answer

Q10. While operating in SRST, what is needed to route calls outside of the remote site location to the PSTN? 

A. SIP trunk 

B. CallManager route patterns 

C. translation patterns 

D. POTS dial peers 

E. VOIP dial peers 

View Answer