Want to know Actualtests 300 075 dump Exam practice test features? Want to lear more about Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) certification experience? Study Free Cisco 300 075 pdf answers to Most recent cisco 300 075 questions at Actualtests. Gat a success with an absolute guarantee to pass Cisco 300 075 ciptv2 (Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2)) test on your first attempt.


2026 New 300-075 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-075/

Q1. When a call is made from a video endpoint to a Cisco TelePresence EX90 that is registered to a Cisco VCS Control, which portion of the destination URI is the first match that is attempted? 

A. the full URI, including the domain portion 

B. the destination alias, without the domain portion 

C. the E.164 number that is assigned to the Cisco TelePresence EX90 

D. the directory number that is assigned to the Cisco TelePresence EX90 

Answer:

Q2. Which Cisco IOS command is used to verify that a SAF Forwarder that is registered with Cisco Unified Communications Manager has established neighbor relations with an adjacent SAF Forwarder? 

A. show eigrp service-family ipv4 neighbors 

B. show eigrp address-family ipv4 neighbors 

C. show voice saf dndball 

D. show saf neighbors 

E. show ip saf neighbors 

Answer:

Explanation: 

Incorrect Answer: B, C, D, E 

Router# show eigrp service-family ipv4 4453 neighbors 

Link: http://www.cisco.com/en/US/docs/ios/saf/command/reference/saf_s1.html 

Q3. How is the region assigned to a device such as an IP phone? 

A. Regions are assigned directly in the device configuration page. 

B. Regions can be assigned only through a device pool. 

C. Regions can be assigned either directly on the device configuration page or through the device pool. If both configurations exist, the device pool region configuration takes precedence. 

D. Regions can be assigned either directly on the device configuration page or through the device pool. If both configurations exist, the device region configuration takes precedence. 

Answer:

Q4. To preserve analog calls in an MGCP switchback event, which three commands must be configured in the MGCP fallback router? (Choose three.) 

A. h323 

B. mgcp-switchback-graceful 

C. voice service voip 

D. mgcp-graceful 

E. preserve-h323 

F. no h225 timeout keepalive 

Answer: A,C,F 

Explanation: 

Incorrect Answer: B, D, E these additional command for call preservation when using MGCP fallback: voice service voip h323 no h225 timeout keepalive Reference. CCNP Voice CIPT2 642-457 Quick Reference, 2nd Edition 

Q5. On which Cisco Unified Communications Manager configuration parameter does the CODEC that a Cisco IP Phone uses for a call depend? 

A. enterprise parameters 

B. media resources 

C. physical location 

D. region 

E. location 

Answer:

Q6. Which method can be used to address variable-length dial plans? 

A. Overlap sending and receiving. 

B. Add a prefix for all calls that are longer than 10-digits long 

C. Use nested translation patterns to eliminate inter-digit timeout 

D. Use the @macro on the route pattern 

E. Use MGCP gateways, which support variable-length dial plans 

Answer:

Explanation: 

Incorrect Answer: B, C, D, E If the dial plan contains overlapping patterns, Cisco Unified Communications Manager does not route the call until the interdigit timer expires (even if it is possible to dial a sequence of digits to choose a current match). Check this check box to interrupt interdigit timing when Cisco Unified Communications Manager must route a call immediately. By default, the Urgent Priority check box displays as checked. Unless your dial plan contains overlapping patterns or variable length patterns that contain!, Cisco recommends that you do not uncheck the check box. Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmfeat/fsintrcm.htm 

Q7. In a Cisco Unified Communications Manager centralized call processing model, what is the best CAC method recommended for this type of deployment? 

A. QoS-based 

B. location-based 

C. RSVP-based 

D. region-based 

E. gateway-based 

F. gatekeeper-based 

Answer:

Q8. You recently implemented call redundancy at a new remote site, and users report that calls are dropped when the remote site supposedly is in SRST. Which two actions must you take to troubleshoot the problem? (Choose two.) 

A. Confirm that SRST is configured on the voice gateway. 

B. Confirm that the site has an SRST reference that is correctly associated with the Cisco Unified Communications Manager group. 

C. Confirm that a calling search space is assigned to the voice gateway in Cisco Unified Communications Manager. 

D. Confirm that the site devices are associated with a Cisco Unified Communications Manager group and that four Cisco Unified Communications Manager servers are available. 

E. Check the Region settings in Cisco Unified Communications Manager. 

F. Restart Cisco Unified Communications Manager services to confirm that the server is working correctly. 

Answer: A,B 

Q9. When Cisco Extension Mobility is implemented, how is the audio source for the MOH selected? 

A. The audio source that is configured at the user device profile is selected. 

B. The audio source that is configured at the home phone of the user is selected. 

C. The audio source that is configured at the physical phone used for the Cisco Extension Mobility login is selected. 

D. The audio source that is configured in the IP Voice Media Streaming parameters is selected. 

Answer:

Explanation: 

Incorrect Answer: B, C, D To specify the audio source that plays when a user initiates a hold action, choose an audio source from the User Hold MOH Audio Source drop-down list box from device profile configuration settings. Link: http://cisco.biz/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b06dvprf.html 

Q10. Which two statements are true regarding the implementation of globalized call-routing in terms of localized call egress? (Choose two.) 

A. Calling-party numbers are routed from the gateway or trunks to phones. 

B. Called-party numbers are routed from the gateway or trunks to phones. 

C. Calling-party numbers of internal calls are routed from the gateway or trunks. 

D. Calling-party calls are routed to the gateway and trunks. 

Answer: A,D