It is more faster and easier to pass the Cisco 300-175 exam by using Validated Cisco DCUCI Implementing Cisco Data Center Unified Computing (DCUCI) questuins and answers. Immediate access to the Update 300-175 Exam and find the same core area 300-175 questions with professionally verified answers, then PASS your exam with a high score now.


2026 New 300-175 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-175/

Q1. What are the three main components of the VM-FEX environment? (Choose three.)

A. Red Hat Network Satellite server

B. ESX host with Cisco UCS M81KR VIC

C. ESX host with Cisco UCS M72KR CAN

D. VMware vCenter

E. VMware Update Manager

F. Cisco UCS Manager

G. Cisco VSG

Answer: B,D,F

Q2. You need to install a Windows Server operating system that has MPIO enabled, to optimize connectivity with storage arrays. What is a valid prerequisite to perform this task?

A. iSCSI multipathing must be enabled on all of the vNICs and the physical adapters in the iSCSI initiator IP pools.

B. iSCSl multipathing must be disabled during the installation and re-enabled after MPIO is enabled on the host.

C. If there are multiple paths that are configured to the boot LUN. all of these paths must be enabled when the LUN is installed.

D. If there are multiple paths that are configured to the boot LUN, only one path must be enabled when the LUN is installed.

Answer: C

Q3. When you create a vHBA, what will you achieve by enabling persistent binding?

A. This feature allows the binding of the SCSI targets to the vHBA, even across reboots.

B. This feature allows the binding of the same WWPN from the pool to the vHBA, even across reboots.

C. This feature allows the binding of the same WWNN from the pool to the vHBA, even across reboots.

D. This feature allows the binding of the Fibre Channel uplink to the vHBA, even across reboots.

Answer: A

Q4. You need to provision iSCSI initiator IP pools on a Cisco UCS system. How many iSCSI vNICs can you use per boot policy?

A. 2

B. 4

C. 6

D. 8

Answer: D

Q5. DRAG DROP

Answer:

Q6. You need to enable Cisco UCS Manager to support out-of-band IPv4 address access to the Cisco UCS KVM Direct launch page from a web browser. What should you enable?

A. SMASH CLP

B. CIM XML

C. SNMP

D. CIMC Web Service

Answer: B

Explanation: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/Admin-Management/3- 1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1/b_Cisco_UCS_Admin_Mgmt_Guide_3_1_chap ter_0110.html

Q7. Which two prerequisites are required to configure a SAN boot from the FCoE storage of a Cisco UCS system? (Choose two.)

A. The Cisco UCS domain must be able to communicate with the SAN storage device that hosts the operating system image.

B. A boot policy must be created that contains a local disk, and the LVM must be configured correctly.

C. There must be iVR-enabled FCoE proxying between the Cisco UCS domain and the SAN storage device that hosts the operating system image.

D. There must be a boot target LUN on the device where the operating system image is

located.

E. There must be a boot target RAID on the device where the operating system image is located.

Answer: C,D