It is more faster and easier to pass the Cisco 300 208 dumps exam by using 100% Correct Cisco Implementing Cisco Secure Access Solutions (SISAS) questuins and answers. Immediate access to the Down to date 300 208 dumps Exam and find the same core area ccnp security sisas 300 208 official cert guide pdf questions with professionally verified answers, then PASS your exam with a high score now.


2026 New 300-208 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-208/

Q1. ORRECT TEXT 

The Secure-X company has started to tested the 802.1X authentication deployment using the Cisco Catalyst 3560-X layer 3 switch and the Cisco ISEvl2 appliance. Each employee desktop will be connected to the 802.1X enabled switch port and will use the Cisco AnyConnect NAM 802.1X supplicant to log in and connect to the network. 

Your particular tasks in this simulation are to create a new identity source sequence named AD_internal which will first use the Microsoft Active Directory (AD1) then use the ISE Internal User database. Once the new identity source sequence has been configured, edit the existing DotlX authentication policy to use the new AD_internal identity source sequence. 

The Microsoft Active Directory (AD1) identity store has already been successfully configured, you just need to reference it in your configuration. 

In addition to the above, you are also tasked to edit the IT users authorization policy so IT users who successfully authenticated will get the permission of the existing IT_Corp authorization profile. 

Perform this simulation by accessing the ISE GUI to perform the following tasks: 

. Create a new identity source sequence named AD_internal to first use the Microsoft Active Directory (AD1) then use the ISE Internal User database 

. Edit the existing Dot1X authentication policy to use the new AD_internal identity source sequence: 

. If authentication failed-reject the access request 

. If user is not found in AD-Drop the request without sending a response 

. If process failed-Drop the request without sending a response 

. Edit the IT users authorization policy so IT users who successfully authenticated will get the permission of the existing IT_Corp authorization profile. 

To access the ISE GUI, click the ISE icon in the topology diagram. To verify your configurations, from the ISE GUI, you should also see the Authentication Succeeded event for the it1 user after you have successfully defined the DotlX authentication policy to use the Microsoft Active Directory first then use the ISE Internal User Database to authenticate the user. And in the Authentication Succeeded event, you should see the IT_Corp authorization profile being applied to the it1 user. If your configuration is not correct and ISE can't authenticate the user against the Microsoft Active Directory, you should see the Authentication Failed event instead for the it1 user. 

Note: If you make a mistake in the Identity Source Sequence configuration, please delete the Identity Source Sequence then re-add a new one. The edit Identity Source Sequence function is not implemented in this simulation. 

Answer: Review the explanation for full configuration and solution. 

Q2. What user rights does an account need to join ISE to a Microsoft Active Directory domain? 

A. Create and Delete Computer Objects 

B. Domain Admin 

C. Join and Leave Domain 

D. Create and Delete User Objects 

Answer: A 

Q3. What endpoint operating system provides native support for the SPW? 

A. Apple iOS 

B. Android OS 

C. Windows 8 

D. Mac OS X 

Answer: A 

Q4. What is a required configuration step for an 802.1X capable switch to support dynamic 

VLAN and ACL assignments? 

A. Configure the VLAN assignment. 

B. Configure the ACL assignment. 

C. Configure 802.1X authenticator authorization. 

D. Configure port security on the switch port. 

Answer: C 

Q5. Which command enables static PAT for TCP port 25? 

A. nat (outside,inside) static 209.165.201.3 209.165.201.226 eq smtp 

B. nat static 209.165.201.3 eq smtp 

C. nat (inside,outside) static 209.165.201.3 service tcp smtp smtp 

D. static (inside,outside) 209.165.201.3 209.165.201.226 netmask 255.255.255.255 

Answer: C 

Q6. What implementation must be added to the WLC to enable 802.1X and CoA for wireless endpoints? 

A. the ISE 

B. an ACL 

C. a router 

D. a policy server 

Answer: A 

Q7. Which two portals can be configured to use portal FQDN? (Choose two.) 

A. admin 

B. sponsor 

C. guest 

D. my devices 

E. monitoring and troubleshooting 

Answer: B,D 

Q8. Which time allowance is the minimum that can be configured for posture reassessment interval? 

A. 5 minutes 

B. 20 minutes 

C. 60 minutes 

D. 90 minutes 

Answer: C 

Q9. Which two identity databases are supported when PEAP-MSCHAPv2 is used as EAP type? (Choose two.) 

A. Windows Active Directory 

B. LDAP 

C. RADIUS token server 

D. internal endpoint store 

E. internal user store 

F. certificate authentication profile 

G. RSA SecurID 

Answer: A,E 

Q10. In the command 'aaa authentication default group tacacs local', how is the word 'default' defined? 

A. Command set 

B. Group name 

C. Method list 

D. Login type 

Answer: C