Our pass rate is high to 98.9% and the similarity percentage between our 300 320 arch pdf study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Cisco cisco 300 320 exam in just one try? I am currently studying for the Cisco ccdp 300 320 exam. Latest Cisco aerospatiale alenia atr 42 300 320 Test exam practice questions and answers, Try Cisco atr 42 300 320 Brain Dumps First.


2026 New 300-320 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-320/

Q1. Distinct, physical redundancy within a network layer is a key characteristic that contributes to the high availability of the hierarchical network design. Which of the following is not an examples of this model? 

A. SAN extension with dual fabrics such as a yellow VSAN and a blue VSAN utilized via multipath software 

B. Redundant power supplies and hot-swappable fan trays in Aggregate switches 

C. A single SAN fabric with redundant uplinks and switches 

D. Servers using network adapter teaming software connected to dual-attached access switches 

Answer: C 

Q2. What is an advantage of using the Cisco FabricPath feature in a data center environment? 

A. VSS does not have to be configured. 

B. Transparent Interconnection of Lots of Links can be configured simultaneously. 

C. Equal-Cost Multipath can be used to choose the forwarding path. 

D. The control plane and management plane remain separate. 

Answer: C 

Q3. Which two key components are related to one firewall per ISP design option for e-commerce? (Choose two.) 

A. It is a common approach to single-homing. 

B. This approach is commonly used in large sites. 

C. Any failure on an edge router results in a loss of session. 

D. It has one NAT to two ISP-assigned blocks. 

E. It is difficult to set up and administer. 

Answer: C,D 

Q4. Which of the following is true concerning best design practices at the switched Access layer of the traditional layer2 Enterprise Campus Network? 

A. Cisco NSF with SSO and redundant supervisors has the most impact on the campus in the Access layer 

B. Provide host-level redundancy by connecting each end device to 2 separate Access switches 

C. Offer default gateway redundancy by using dual connections from Access switches to redundant Distribution layer switches using a FHRP 

D. Include a link between two Access switches to support summarization of routing information from the Access to the Distribution layer 

Answer: A 

Q5. Which two of these correctly describe asymmetric routing and firewalls? (Choose two.) 

A. only operational in routed mode 

B. only operational in transparent mode 

C. only eight interfaces can belong to an asymmetric routing group 

D. operational in both failover and non-failover configurations 

E. only operational when the firewall has been configured for failover 

Answer: C,D 

Q6. What are two advantages of a L2 looped data center design model? (Choose two.) 

A. promotes Layer 2 high availability 

B. prevents VLAN propagation 

C. allows sharing of service modules 

D. eliminates the use of STP 

E. improves data transfer speeds 

Answer: A,C 

Q7. Which of these statements is correct regarding Stateful Switchover and Cisco Nonstop Forwarding? 

A. Utilizing Cisco NSF in Layer 2 environments can reduce outages to one to three seconds. 

B. Utilizing SSO in Layer 3 environments can reduce outages to one to three seconds. 

C. Distribution switches are single points of failure causing outages for the end devices. 

D. Utilizing Cisco NSF and SSO in a Layer 2 environment can reduce outages to less than one second. 

E. NSF and SSO with redundant supervisors have the most impact on outages at the access layer. 

Answer: E 

Q8. Which option provides software modularity in Cisco NX-OS software in the data center design? 

A. The ip routing command enables all of the features in the Cisco NX-OS. 

B. All of the features are enabled by default in the Cisco NX-OS. 

C. Individual features must be manually enabled to start the process. 

D. The Cisco NX-OS has a management VRF that is enabled by default. 

Answer: C 

Q9. What is the maximum number of routers that each OSPF area (including the backbone) should contain? 

A. 30 

B. 10 

C. 50 

D. 100 

Answer: C 

Q10. Which statement about the ToR design model is true? 

A. It can shorten cable runs and simplify rack connectivity. 

B. Each ToR switch must be individually managed. 

C. Multiple ToR switches can be interconnected to provide a loop-free spanning-tree infrastructure. 

D. It can connect servers that are located in separate racks. 

Answer: A