Master the 300-375 WISECURE Securing Cisco Wireless Enterprise Networks content and be ready for exam day success quickly with this Pass4sure 300-375 actual test. We guarantee it!We make it a reality and give you real 300-375 questions in our Cisco 300-375 braindumps.Latest 100% VALID Cisco 300-375 Exam Questions Dumps at below page. You can use our Cisco 300-375 braindumps and pass your exam.
2026 New 300-375 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-375/
Q1. An engineer is considering an MDM integration with Cisco ISE to assist with security for lost devices. Which two functions of MDM increase security for lost devices that access data from the network? (Choose two.)
A. PIN enforcement
B. Jailbreak/root detection
C. data wipe
D. data encryption
E. data loss prevention
Answer: A, C
Q2. On which two ports does the RADIUS server maintain a database and listen for incoming authentication and accounting requests? (Choose two.)
A. UDP 1900
B. UDP port 1812
C. TCP port 1812
D. TCP port 1813
E. UDP port 1813
Answer: B, E
Q3. Access points at branch sites for a company are in FlexConncct mode and perform local switching, but they authenticate to the central RADIUS at headquarters. VPN connections to the headquarters have gone down, but each branch site has a local authentication server. Which three features on the wireless controller can be configured to maintain network operations if this situation reoccurs? (Choose three.)
A. Put APs in FlexConnect Group for Remote Branches.
B. Set Branch RADIUS as Primary.
C. Put APs in AP Group Per Branch.
D. Put APs in FlexConnect Group Per Branch.
E. Set Branch RADIUS OS Secondary.
F. Set HQ RADIUS a-s primary.
Answer: A, E, F
Q4. An engineer must provide a graphical trending report of the total number of wireless clients on the network. Winch report provides the required data?
A. Client Summary
B. Posture Status Count
C. Client Traffic Stream Metrics
D. Mobility Client Summary
Answer: D
Q5. Which EAP type requires the use of device certificates?
A. EAP-TLS
B. EAP-FAST
C. EAP-SSL
D. PEAP
E. LEAP
Answer: A
Q6. An engineer is configuring client MFP. What WLAN Layer 2 security must be selected to use client MFP?
A. Static WEP
B. CKIP
C. WPA+WPA2
D. 802 1x
Answer: C
Q7. An engineer has determined that the source of an authentication issue is the client laptop. Which three items must be verified for EAP-TLS authentication? (Choose three.)
A. The client certificate is formatted as X 509 version 3
B. The validate server certificate option is disabled.
C. The client certificate has a valid expiration date.
D. The user account is the same in the certificate.
E. The supplicant is configured correctly.
F. The subject key identifier is configured correctly.
Answer: A, D, F
Q8. A customer is concerned that radar is impacting the access point that service the wireless network in an office located near an airport. On which type of channel should you conduct spectrum analysis to identify if radar is impacting the wireless network?
A. UNII-3 channels
B. UNII-1 channels
C. 802.11b channels
D. 2.4 GHz channels
E. UMII-2 channels
F. Channels 1, 5, 9, 13
Answer: E
Q9. Scenario
TOPOLOGY
MONITOR
WLAMS
CONTROLLER
WIRELESS
SECURITY
Which configuration changes need to be made to allow WPA2 + PSK to operate property on the East-WLC-2504A controller? (Choose four.)
A. Disable Dynamic AP Management.
B. Click on the Status Enabled radio button.
C. Change the Layer 3 Security to Web Policy.
D. Change the WPA + WPA2 Parameters to WPA2 Policy-AES.
E. Change the PSK Format to HEX.
F. Change the WLAN ID.
G. Change the VLAN Identifier.
H. Change the IP Address of the Virtual interface.
I. Change the SSID name of the WLAN.
J. Click on the PSK radio button and add the password in the text box.
Answer: B, F, I, J
Q10. What is the maximum number of clients that a small branch deployment using a four- member Cisco Catalyst 3850 stack (acting as MC/MA) can support?
A. 10000
B. 1000
C. 500
D. 2000
E. 5000
Answer: E