Exam Code: 300-460 (Practice Exam Latest Test Questions VCE PDF)
Exam Name: Implementing and Troubleshooting the Cisco Cloud Infrastructure (CLDINF)
Certification Provider: Cisco
Free Today! Guaranteed Training- Pass 300-460 Exam.
2026 New 300-460 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-460/
Q1. Where does performance tuning of high CPU utilization take place in Cisco UCS?
A. high performance policy
B. energy performance mode policy
C. compute policy
D. BIOS policy
Answer: D
Q2. Which configuration provides the highest performance level to Virtual Extensible LAN?
A. VxLAN in unicast mode with VxLAN TSO offload in Cisco UCS
B. VxLAN in multicast mode with MAC distribution
C. VxLAN in multicast mode with VxLAN TSO offload in Cisco UCS
D. VxLAN in unicast mode with MAC distribution and VxLAN TSO offload in Cisco UCS
Answer: C
Q3. An administrator is troubleshooting basic connectivity between two Fibre Channel points that include node hops and latency data. Which tool is the best for troubleshooting this scenario?
A. ping
B. fctraceroute
C. traceroute
D. fcping
Answer: B
Reference: Ping and traceroute are two of the most useful tools for troubleshooting TCP/IP networking problems. The ping utility generates a series of.echopackets to a destination across a TCP/IP internetwork. When the echo packets arrive at the destination, they are rerouted and sent back to the source. Using ping, you can verify connectivity and latency to a particular destination across an IP routed network.
The traceroute utility operates in a similar fashion, but can also determine the specific path that a frame takes to its destination on a hop-by-hop basis.
Q4. What does the Auto Deploy function of an ESXi host rely on?
A. DNS
B. PXE
C. DHCP
D. SCP
Answer: B
Reference: http://blogs.vmware.com/vsphere/2013/03/auto-deploy-stateless-caching-stateless-caching-and-network-isolated-hosts.html
Q5. Which Cisco Nexus 1000V configuration implements VxLAN segment 5001 as unicast and segment 5002 as multicast?
A. bridge-domain bd-5001 segment id 5001 no segment distribution mac ! Bridge-domain bd-5002 segment id 5002 group 239.1.1.2
B. segment mode multicast bridge-domain bd-5001 segment id 5001 segment mode unicast-only ! Bridge-domain bd-5002 segment id 5002 group 239.1.1.2 segment mode multicast
C. segment mode unicast-only bridge-domain bd-5001 segment id 5001 ! Bridge-domain bd-5002 segment id 5002 group 239.1.1.2 no segment mode unicast-only
D. segment mode unicast-only bridge-domain bd-5001 segment id 5001 ! Bridge-domain bd-5002 segment id 5002
Answer: C
Reference: http://www.cisco.com/c/en/us/products/collateral/switches/nexus-7000-series-switches/guide_c07-728863.html
Q6. Which three boot policies can be created for Cisco UCS Manager in Cisco UCS Director? (Choose three.)
A. VLAN boot
B. UEFI secure boot
C. iSCSI boot
D. NFS boot
E. SAN boot
F. FCOE boot
Answer: A,C,E
Reference: Various boot options are:
SAN Boot
LAN Boot
Local Disk Boot
Virtual Media Boot
iSCSI Boot
Q7. A Cisco UCSM administrator has been tasked with deploying a new data center. Which two recommendations aid in the ability to associate a service with a server? (Choose two.)
A. The host control setting for a QoS policy applies to vNICs only. It has no effect on a vHBA.
B. You can assign only a QoS policy to a vHBA if the priority setting for that policy is set to fc, which represents the Fibre Channel system class.
C. The host control setting for a QoS policy applies to vHBAs only.
D. Power capping is supported for rack servers. If you include a power control policy in a service profile that is associated with a rack-mount server, the policy is implemented.
Answer: B,D
Q8. Which port-channel type is the best when deploying a Cisco Nexus 1000V with Cisco UCS B-Series Blades?
A. channel-group mode on sub-group cdp
B. channel-group auto mode on mac-pinning
C. channel-group auto mode active
D. channel-group mode on mac-pinning
Answer: B
Reference: http://www.cisco.com/c/en/us/products/collateral/switches/nexus-1000v-switch-vmware-vsphere/white_paper_c11-558242.html
Q9. An administrator is troubleshooting a virtual switch that does not show up when it is added to the host using the port-profile management snap-in. Which action is the next step?
A. Enable SR-IOV for the virtual switch inside Hyper-V
B. Add drivers for the virtual switch
C. Reboot the server
D. Enable VMbus for the parent partition and the virtual machine
Answer: C
Reference: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/vm_fex/hyperv/gui/config_ guide/2-1/b_GUI_Hyper-V_VM-FEX_UCSM_Configuration_Guide/b_GUI_Hyper-V_VM-FEX_UCSM_Configuration_Guide_chapter_0101.html#task_FD3156BC3C7F48FBBF728E 8A824E81CA
Q10. An administrator is installing a hypervisor on a Cisco USB B-Series Blade Server. In which three locations can the OS image be installed in Cisco UCSM? (Choose three.)
A. local disk
B. CD-ROM
C. PXE
D. LAN boot
E. SAN
F. USB
Answer: A,C,E
Reference: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/1-0-2/b_GUI_Config_Guide/GUI_Config_Guide_chapter25.pdf