Testking offers free demo for 300-460 exam. "Implementing and Troubleshooting the Cisco Cloud Infrastructure (CLDINF)", also known as 300-460 exam, is a Cisco Certification. This set of posts, Passing the Cisco 300-460 exam, will help you answer those questions. The 300-460 Questions & Answers covers all the knowledge points of the real exam. 100% real Cisco 300-460 exams and revised by experts!
2026 New 300-460 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-460/
Q1. An administrator is troubleshooting basic connectivity between two Fibre Channel points that include node hops and latency data. Which tool is the best for troubleshooting this scenario?
A. ping
B. fctraceroute
C. traceroute
D. fcping
Answer: B
Reference: Ping and traceroute are two of the most useful tools for troubleshooting TCP/IP networking problems. The ping utility generates a series of.echopackets to a destination across a TCP/IP internetwork. When the echo packets arrive at the destination, they are rerouted and sent back to the source. Using ping, you can verify connectivity and latency to a particular destination across an IP routed network.
The traceroute utility operates in a similar fashion, but can also determine the specific path that a frame takes to its destination on a hop-by-hop basis.
Q2. Which two fields are needed for a Cisco UCS Director administrator to configure a WWN block? (Choose two.)
A. the first WWNN or WWPN address in the block
B. the WWN for the initiator
C. a unique name for the initiator
D. a unique name for the block
E. the number of WWN or WWPN addresses in the block
Answer: A,E
Reference:
Q3. Which three options describe the correct methods to install the Cisco Nexus 1000V VEM (VIB) software module on the VMware ESXi hypervisor? (Choose three.)
A. using the “Add Host to vSphere Distributed Switch” dialog on the vSphere Network tab when Update Manager is installed
B. esxcli software vib install –n/tmp/Cisco_bootbank_cisco-vem –v173-esx_5.2.1.3.1.4.0-3.2.1.vib
C. executing the Deploy-Nexus 1000V-VSEM.ps1 script
D. D. esxcli software vib install –v/tmp/Cisco_bootbank_cisco-vem –v173-esx_5.2.1.3.1.4.0-3.2.1.vib
E. using the Host Selection dialog box in Cisco Virtual Switch Update Manager
F. creating a baseline group in VMware Update Manager
Answer: A,D,E
Reference: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/5_2_1_s_v_3_1_ 4/install/guide/b_Cisco_N1KV_VMware_Install_and_Upgrade_Guide_521SV314/b_Cisco_ N1KV_VMware_Install_and_Upgrade_Guide_521SV314a_chapter_01.html#task_F02BD7 7701B345D9B34A9332AA7C179F
Q4. Which four issues are often detected when validating workflows in Cisco UCS Director? (Choose four.)
A. Task Handler not found
B. missing admin/task inputs after import or upgrade
C. mapping mismatch
D. version incompatibilities
E. debugging logging information
F. missing optional values for tasks
G. missing task action value
H. missing mandatory values for tasks
Answer: A,B,C,H
Reference: Section Workflow validation of the link: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-director/orchestration-guide/5-4/b_UCS_Director_Orchestration_Guide_5_4/b_UCS_Director_Orchestration_Guide_5_4_ chapter_011.html
Q5. Which four options are required on a DCHP server to enable PXE boot? (Choose four.)
A. boot server host name (TFTP server hostname or IP address)
B. subnet mask
C. DNS server
D. lease time
E. domain name
F. bootfile name
G. router (Gateway)
Answer: A,B,C,G
Reference: Refer to table 1 of the link: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-director/bma-install-config/4-1/b_ucsd_bma_install_config_guide_41/b_ucsd_bma_install_config_guide_41_chapter_01 00.html
Q6. Which is the step to associate an application profile EPG to a VMM domain?
A. The APIC pushes the EPGs as virtual switches to the VM controller.
B. The VMM administrator creates the port groups in the Tenant window then assigns the EPGs to CPPAs.
C. The APIC pushes the EPGs as port groups in the VM controller.
D. The policy administrator assigns the EPG to physical endpoints in the VMM.
Answer: C
Reference: Provisioning of EPGs in VMM Domain—Associates application profile EPGs to VMM domains as follows:
The APIC pushes these EPGs as port groups in the VM controller. The compute administrator then places vNICs into these port groups.
An EPG can span multiple VMM domains, and a VMM domain can contain multiple EPGs.
Q7. Which port-channel type is the best when deploying a Cisco Nexus 1000V with Cisco UCS B-Series Blades?
A. channel-group mode on sub-group cdp
B. channel-group auto mode on mac-pinning
C. channel-group auto mode active
D. channel-group mode on mac-pinning
Answer: B
Reference: http://www.cisco.com/c/en/us/products/collateral/switches/nexus-1000v-switch-vmware-vsphere/white_paper_c11-558242.html
Q8. You have been asked to configure a virtual fiber channel interface. Which information is needed to complete this task?
A. Fibre Channel ID and VSAN database key
B. VSAN ID and Fibre Channel interface
C. active zoneset and VSAN ID
D. VLAN ID, VSAN ID, and Ethernet interface number
Answer: B
Reference: Check section “Creating a VFC” of the link; http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-director/network-devices-mgmt-guide/b_Network_Devices_Management_Guide/b_Network_Devices_Management_Guide _chapter_01001.html
Q9. Which option lists the number of segments that are supported by VxLAN as standardized in RFC7348 and the number of bytes of overhead that are added to the original frame?
A. 1 million; 50
B. 16 million; 50
C. 1 million; 48
D. 6 million; 50
Answer: B
Reference: https://tools.ietf.org/html/rfc7348
Q10. A Cisco UCS Director administrator is attempting to view log details for a service request. Which option lists the steps that accomplish this task?
A. On the menu bar, choose Organizations > My Approvals
Click the Service Requests tab.
Choose the service request.
Click View Details, and choose the Log tab.
B. On the menu bar, choose Organizations > Service Requests
From the left panel, choose a user group.
Click the Service Request tab.
Choose the service request.
Click View Details, and choose the Log tab.
C. On the menu bar, choose Organizations > My Approvals
Click the Service Requests tab.
Choose the service request.
Click View Details, and choose the Input/Output tab.
D. D. On the menu bar, choose Organizations > Virtual Resources
From the left panel, choose a user group.
Click the Service Request tab.
Choose a service request.
Click View Details, and choose the Input/Output tab.
Answer: B
Reference: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-director/troubleshooting-guide/b_UCS_Director_Troubleshooting_guide/b_UCS_Director_Troubleshooting_guide_c hapter_01011.html#task_B7A72B55419B455D9C1B7A93CF40633A