Replace 350-401 Free Samples 2021

NEW QUESTION 1
Which statement about TLS is true when using RESTCONF to write configurations on network devices?

• A. It is provided using NGINX acting as a proxy web server.
• B. It is no supported on Cisco devices.
• C. It required certificates for authentication.
• D. It is used for HTTP and HTTPs requests.

Answer: C

NEW QUESTION 2
Which statement about agent-based versus agentless configuration management tools is true?

• A. Agentless tools require no messaging systems between master and slaves.
• B. Agentless tools use proxy nodes to interface with slave nodes.
• C. Agent-based tools do not require a high-level language interpreter such as Python or Ruby on slave nodes.
• D. Agent-based tools do not require installation of additional software packages on the slave nodes.

Answer: D

NEW QUESTION 3
Which two steps are required for a complete Cisco DNA Center upgrade? (Choose two.)

• A. golden image selection
• B. automation backup
• C. proxy configuration
• D. application updates
• E. system update

Answer: DE

NEW QUESTION 4
Which two pieces of information are necessary to compute SNR? (Choose two.)

• A. EIRP
• B. noise floor
• C. antenna gain
• D. RSSI
• E. transmit power

Answer: BD

NEW QUESTION 5
Which statement about multicast RPs is true?

• A. RPs are required only when using protocol independent multicast dense mode.
• B. RPs are required for protocol independent multicast sparse mode and dense mode.
• C. By default, the RP is needed periodically to maintain sessions with sources and receivers
• D. By default, the RP is needed only to start new sessions with sources and receivers.

Answer: D

NEW QUESTION 6
Which NGFW mode block flows crossing the firewall?

• A. Passive
• B. Tap
• C. Inline tap
• D. Inline

Answer: C

NEW QUESTION 7
Drag and drop the characteristics from the left onto the correct routing protocol types on the right.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
OSPF: SEGMENT, LINK STATE, TABLES
EIGRP: UNEQUAL PATH, DISTANCE VECTOR, METRIC

NEW QUESTION 8
Refer to the exhibit.

What are two effect of this configuration? (Choose two.)

• A. Inside source addresses are translated to the 209.165.201.0/27 subnet.
• B. It establishes a one-to-one NAT translation.
• C. The 10.1.1.0/27 subnet is assigned as the inside global address range.
• D. The 209.165.201.0/27 subnet is assigned as the outside local address range.
• E. The 10.1.1.0/27 subnet is assigned as the inside local addresses.

Answer: AE

NEW QUESTION 9
A network administrator is implementing a routing configuration change and enables routing debugs to track routing behavior during the change. The logging output on the terminal is interrupting the command typing process. Which two actions can the network administrator take to minimize the possibility of typing commands incorrectly? (Choose two.)

• A. Configure the logging synchronous global configuration command
• B. Configure the logging delimiter feature
• C. Configure the logging synchronous command under the vty
• D. Press the TAB key to reprint the command in a new line
• E. increase the number of lines on the screen using the terminal length command

Answer: CD

NEW QUESTION 10
If a VRRP master router fails, which router is selected as the new master router?

• A. router with the highest priority
• B. router with the highest loopback address
• C. router with the lowest loopback address
• D. router with the lowest priority

Answer: A

NEW QUESTION 11
Refer to the exhibit.

Link1 is a copper connection and Link2 is a fiber connection. The fiber port must be the primary port for all forwarding. The output of the show spanning-tree command on SW2 shows that the fiber port is blocked by spanning tree. An engineer enters the spanning- tree port-priority 32 command on GO/1 on SW2, but the port remains blocked. Which command should be entered on the ports that are connected to Link2 to resolve the issue?

• A. Enter spanning-tree port-priority 32 on SW1.
• B. Enter spanning-tree port-priority 224 on SW1.
• C. Enter spanning-tree port-priority 4 on SW2.
• D. Enter spanning-tree port-priority 64 on SW2.

Answer: A

NEW QUESTION 12
The login method is configured on the VTY lines of a router with these parameters.
The first method for authentication is TACACS
If TACACS is unavailable, login is allowed without any provided credentials
Which configuration accomplishes this task?

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: C

NEW QUESTION 13
An engineer configures a WLAN with fast transition enabled Some legacy clients fail to connect to this WLAN Which feature allows the legacy clients to connect while still allowing other clients to use fast transition based on then OLTIs?

• A. over the DS
• B. adaptive R
• C. 802.11V
• D. 802.11k

Answer: B

NEW QUESTION 14
Which two protocols are used with YANG data models? (Choose two.)

• A. HTTPS
• B. SSH
• C. RESTCONF
• D. TLS
• E. NFTCONF

Answer: CE

NEW QUESTION 15
Which statement about a fabric access point is true?

• A. It is in local mode an must be connected directly to the fabric border node.
• B. It is in FlexConnect mode and must be connected directly to the fabric border node.
• C. It is in local mode an must connected directly to the fabric edge switch.
• D. It is in FlexConnect mode and must be connected directly to the fabric edge switch.

Answer: C

NEW QUESTION 16
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?

• A. security group tag ACL assigned to each port on a switch
• B. security group tag number assigned to each port on a network
• C. security group tag number assigned to each user on a switch
• D. security group tag ACL assigned to each router on a network

Answer: B

NEW QUESTION 17
Which statement about route targets is true when using VRF-Lite?

• A. When BGP is configured, route targets are transmitted as BGP standard communities.
• B. Route targets control the import and export of routes into a customer routing table.
• C. Route targets allow customers to be assigned overlapping addresses.
• D. Route targets uniquely identify the customer routing table.

Answer: B

NEW QUESTION 18
A client device fails to see the enterprise SSID, but other devices are connected to it. What is the cause of this issue?

• A. The hidden SSID was not manually configured on the client.
• B. The broadcast SSID was not manually configured on the client.
• C. The client has incorrect credentials stored for the configured hidden SSID.
• D. The client has incorrect credentials stored for the configured broadcast SSID.

Answer: A

NEW QUESTION 19
Refer to the exhibit.

SwitchC connects HR and Sales to the Core switch However, business needs require that no traffic from the Finance VLAN traverse this switch Which command meets this requirement?
A)

B)

C)

D)

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: D

NEW QUESTION 20
Which two descriptions of FlexConnect mode for Cisco APs are true? (Choose two.)

• A. APs that operate in FlexConnect mode cannot detect rogue Aps.
• B. FlexConnect mode is used when the APs are set up in a mesh environment and used to bridge between each other.
• C. FlexConnect mode is a feature that is designed to allow specified CAPWAP-enabled APs to exclude themselves from managing data traffic between clients and infrastructure.
• D. When connected to the controller, FlexConnect APs can tunnel traffic back to the controller.
• E. FlexConnect mode is a wireless solution for branch office and remote office deployments.

Answer: CD

NEW QUESTION 21
......