Proper study guides for Up to the immediate present Cisco CCDE Written Exam certified begins with Cisco 352-001 preparation products which designed to deliver the Precise 352-001 questions by making you pass the 352-001 test at your first time. Try the free 352-001 demo right now.


2026 New 352-001 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/352-001/

Q1. Refer to the exhibit. 

In this BGP design, what is the next hop for 10.1.1.0/24 on R8 and R7? 

A. The next hop for 10.1.1.0/24 on R7 is R8 and the next hop for R8 is R7. 

B. The next hop for 10.1.1.0/24 on R7 is R5 and the next hop for R8 is R6. 

C. The next hop for 10.1.1.0/24 on R7 is R6 and the next hop for R8 is R5. 

D. The next hop for 10.1.1.0/24 on R7 is R3 and the next hop for R8 is R4. 

Answer: A 

Q2. Refer to the exhibit. 

Service Provider A and Service Provider B have agreed to a strategic interconnect relationship that will allow them access into each other's geographies by using an inter-AS eBGP VPNv4 multihop between route reflectors. Which two options will accomplish this scenario? (Choose two.) 

A. RR 1 and RR 2 peer using multihop eBGP VPNv4 to exchange prefixes. 

B. ASBR 1 and ASBR 2 act as inline route reflectors that set themselves as the next-hop. 

C. An LSP is formed between ASBR 1 and ASBR 2 using eBGP IPv4. 

D. An LSP is formed between ASBR 1 and ASBR 2 using eBGP VPNv4. 

E. RR 1 and RR 2 peer using multihop eBGP IPv4 to exchange prefixes. 

Answer: AC 

Q3. Refer to the exhibit. 

You are designing a spanning-tree network for a small campus. Which two of these options would result in a trouble-free spanning-tree network design? (Choose two.) 

A. Convert all ports to trunk ports, prune off the VLANs that you do not require, and minimize the number of blocking ports. 

B. Introduce Layer 3 VLANs (SVIs) and prune off the VLANs that you do not require. 

C. Convert all the ports to trunk and enable BackboneFast. 

D. Convert all the ports to trunk and enable UplinkFast between all the links. 

Answer: AB 

Q4. Refer to the exhibit. 

A service provider using IS-IS has designed this network with all core links at the Layer 2 control plane. How will they adjust the design to reduce the flooding of update packets? 

A. Change the area type of the links to be level-1-2 to allow level-1 updates. 

B. Change the network type of the links from broadcast to point-to-point. 

C. Use IS-IS mesh groups. 

D. Configure SPF timers to be more aggressive so that updates are more quickly cleared from the queue. 

Answer: C 

Q5. A network administrator is in charge of multiple IPsec VPN headend devices that service thousands of remote connectivity, point-to-point, IPsec/GRE tunnels. During a recent power outage, in which it was found that a backup power supply in one of those headend devices was faulty, one of the headend routers suffered a complete shutdown event. When the router was successfully recovered, remote users found intermittent connectivity issues that went away after several hours. Network operations staff accessed the headend devices and found that the recently recovered unit was near 100% CPU for a long period of time. How would you redesign the network VPN headend devices to prevent this from happening again in the future? 

A. Move the tunnels more evenly across the headend devices. 

B. Implement Call Admission Control. 

C. Use the scheduler allocate command to curb CPU usage. 

D. Change the tunnels to DMVPN. 

Answer: B 

Q6. A network design shows two routers directly connected to an Ethernet switch using optical connections. There is an OSPF adjacency between the routers. In this design, which solution will ensure that interface down detection is reported as quickly as possible to the IGP? 

A. optimized OSPF SPF timers 

B. Bidirectional Forwarding Detection 

C. automatic protection switching 

D. optimized OSPF LSA timers 

E. Ethernet OAM CFM monitoring 

Answer: B 

Q7. As a service provider you must support a Layer 2 virtualization protocol that does not include the use of label switching. Which option can meet this design requirement? 

A. VPLS 

B. VRF-Lite 

C. QinQ 

D. 802.3ad 

Answer: C 

Q8. You are a network designer and are responsible for ensuring that the network you design is secure. How do you plan to prevent infected devices on your network from sourcing random DDoS attacks using forged source addresses? 

A. ACL-based forwarding 

B. ACL filtering by destination 

C. Unicast RPF loose mode 

D. Unicast RPF strict mode 

Answer: D 

Q9. Refer to the exhibit. 

Your junior design engineer presents this configuration design. What is the next-hop router for CE3, and why? 

A. CE1. BGP weight is higher than CE2. 

B. CE2. EBGP administrative distance is lower than RIP. 

C. CE2. The link between CE2 and PE1 has more bandwidth than CE1-to-PE1. 

D. CE1. HSRP on CE1 is in active state. 

Answer: D 

Q10. You are designing a large Frame Relay WAN for a customer. The routing protocol is OSPF. What is the effect on the routing table if the WAN interfaces are configured as point-to-multipoint? 

A. Only a route for the DR will be present in the routing table. 

B. Configuring point-to-multipoint has no effect on the routing table. The route that is configured with the area command will be seen in the routing table. 

C. Multipoint interfaces dynamically add the network of the connected interface. 

D. Multipoint interfaces dynamically add a /32 route for each neighbor in the WAN. 

Answer: D