Act now and download your Cisco 352-001 test today! Do not waste time for the worthless Cisco 352-001 tutorials. Download Up to the immediate present Cisco CCDE Written Exam exam with real questions and answers and begin to learn Cisco 352-001 with a classic professional.


2026 New 352-001 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/352-001/

Q1. You are designing the QoS features for a large enterprise network that includes DMVPN. When would you need to configure QoS preclassify? 

A. when you are marking packets with the DSCP bits 

B. when you are marking packets with the TOS bits 

C. when your service provider requires the DSCP bits be set 

D. when the QoS policy cannot be based on DSCP ToS bits 

Answer: D 

Q2. Your design client has requested that you ensure that the client devices are not dynamically configured with incorrect DNS information. When finalizing the network design, which security option must be configured on the switches? 

A. IGMP snooping 

B. DHCP snooping 

C. root guard 

D. DNS snooping 

Answer: B 

Q3. A company is planning to deploy high-availability cluster support for their servers in a collapsed core data center design. Which issue should be a concern with this design? 

A. NIC teaming 

B. MAC address aging 

C. Layer 3 domain sizing 

D. Layer 2 domain sizing 

Answer: D 

Q4. Refer to the exhibit. 

You are developing a migration plan to enable IPv6 in your IPv4 network. Starting at R3 and assuming default IS-IS operations, what is likely to happen when you enable IPv6 routing on the link from R3 to R2? 

A. Only R3 and R2 have IPv4 and IPv6 reachability. 

B. R2 receives an IPv6 default route from R3. 

C. Loopback reachability between all routers for IPv4 is lost. 

D. All routers except R2 are reachable through IPv4. 

E. R3 advertises the link from R3-R2 to R1, R4 and R5 only. 

Answer: C 

Q5. When a multiprotocol environment is designed to have several routers redistribute among the routing domains, how can routing loops be avoided? 

A. by using the AS-PATH attribute 

B. by using route tags 

C. by activating split horizon 

D. by implementing spanning tree 

Answer: B 

Q6. You are designing a solution to eliminate the risk of high CPU utilization on a core network composed of CRS-1 devices. Which option would eliminate the risk of high CPU utilization across the network? 

A. Use Local Packet Transport Services (LPTS) to manage hardware SNMP flow rate. 

B. Use the in-band control plane policy feature to reduce the SNMP flow rate. 

C. Use the control plane policy feature and reduce SNMP flow rate. 

D. Use control-plane management-plane in-band and reduce the SNMP flow rate. 

E. Use the control-plane management-plane out-of-band feature to reduce the SNMP flow rate. 

Answer: A 

Q7. Refer to the exhibit. 

Your company designed a network to allow server VLANs in a data center to span all access switches. In the design, Layer 3 VLAN interfaces and HSRP are configured on the aggregation switches. In which three ways should the design of the STP domain be optimized for server and application performance? (Choose three.) 

A. Use loop guard on access ports. 

B. Use PortFast on access ports. 

C. Use root guard on access ports. 

D. Align Layer 2 and Layer 3 forwarding paths. 

E. Use BPDU Skew Detection on access ports. 

F. Explicitly determine root and backup root bridges. 

Answer: BDF 

Q8. You are asked to design a large campus network that will be using multicast for data transport. Which feature should be enabled at the Layer 2 access edge for host-only ports? 

A. PortFast 

B. BPDU guard 

C. PIM-SM 

D. PIM query interval 

Answer: A 

Q9. On a VoIP solution design, which option shows one-way latency, packet loss, and jitter measurements that ensure acceptable voice quality? 

A. Latency: 110 ms Packet loss: 1% Jitter: 40 ms 

B. Latency: 130 ms Packet loss: 0.5% Jitter: 30 ms 

C. Latency: 150 ms Packet loss: 1.25% Jitter: 20 ms 

D. Latency: 170 ms Packet loss: 0.75% Jitter: 10 ms 

Answer: B 

Q10. You are working on a network design for Customer A. This design should consider fast convergence features, and it was agreed that BFD should be used for faster link-transition detection. Which three options apply to the use of the echo function in BFD? (Choose three.) 

A. It can be used with asynchronous mode. 

B. BFD control packets are not required. 

C. It can be enabled individually in each direction. 

D. It has the advantage of testing the forwarding path on the remote system. 

E. The rate of periodic transmission of BFD control packets should be increased. 

Answer: ACD