Proper study guides for Far out Cisco CCIE SP Written v4.0 certified begins with Cisco 400-201 preparation products which designed to deliver the Accurate 400-201 questions by making you pass the 400-201 test at your first time. Try the free 400-201 demo right now.
2026 New 400-201 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/400-201/
Q1. Which two statements about forwarding equivalence class (FEC) are true? (Choose two)
A. FEC might correspond to a destination IP subnet, but it might also correspond to any traffic class that the edge LSR considers significant.
B. FEC is a group of IP packets that is forwarded over a different path, but with the same forwarding treatment.
C. FEC is a group of IP packets that is forwarded over the same path, and with the same forwarding treatment.
D. FEC is a group of IP packets that is forwarded over a different path, but with the different forwarding treatment.
E. FEC is a group of IP packets that is forwarded over the same path, but with a different forwarding treatment.
Answer: A,C
Q2. An engineer is working to provide high availability to a Service Provider core network. Which BGP command enables a backup path to be installed in the RIB and CEF tables?
A. maximum-paths ibgp
B. bgp additional-paths install
C. maximum-paths eibgp
D. bgp additional-paths select
E. bgp advertise-best-external
Answer: B
Explanation: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_bgp/configuration/xe-3s/irg-xe-3s-book/bgp_best_external.html#GUID-66F31B75-B1E6-4B38-9B4D-6A89839930CE
Q3. When IPv6 is enabled on an interface, which three multicast addresses does the configured interface automatically join? (Choose three.)
A. FF01::2
B. FEC0::1
C. FF02:0:0:0:0:1:FF00::/104
D. FF02::1
E. FF01::1
F. FF02::2
G. FF02::D
H. FF02::5
Answer: C,D,F
Explanation:
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/4_1/configuration/guides/cli_4_1/clibook/ipv6.pdf https://www.iana.org/assignments/ipv6-multicast-addresses/ipv6-multicast-addresses.xml
Q4. Refer the exhibit. Two Autonomous Systems are enabled to support multicast. An engineer wants to set up configuration so that a multicast client at AS 100 can receive multicast traffic from the M-Server at AS 200. However, the RP announcements must be limited within each autonomous system site. Which Cisco IOS configuration achieves this goal?
A. On both ASBRs Eth0/0 and the no ip pim sparse-mode command.
B. On both ASBRs add the ip pim send-rp-discovery scope 1 command.
C. On both RPs add the ip pim send-rp-discovery scope 2 command.
D. On both ASBRs Eth0/0 add the ip pim bsr-border command.
E. On both ASBRs Eth0/0 add the ip pim dense-mode command.
F. On both RPs add the ip pim bsr-border command.
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/ios/12_2/ipmulti/command/reference/fiprmc_r/1rfmult2.html#wp1050039 It filters the BSR message: http://tools.ietf.org/html/rfc5059#section-4.1
Q5. A network administrator wants to implement an IP dampening feature for a network. Which parameter identifies how fast the accumulated penalty can decay exponentially?
A. reuse threshold
B. suppress threshold
C. half-life period
D. maximum suppress time
Answer: C
Explanation: Reference:
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_pi/configuration/15-sy/iri-15-sy-book/iri-ip-event-damp.html
Q6. Refer to the exhibit.
Which MPLS TE component keeps track of the flooding and admission control?
A. MPLS TE priorities
B. RSVP
C. link attributes
D. link manager
Answer: B
Q7. What is the minimum hardware configuration of the multishelf Cisco CRS-1 system?
A. One route processor (RP) card and one modular services card (MSC)
B. One distributed route processor (DRP) and one S13 fabric card (SFC)
C. One line card chassis (LCC) and one fabric card chassis (FCC)
D. One route processor (RP) and one fabric card chassis (FCC)
E. One line card chassis (LCC) and one S13 fabric card (SFC)
Answer: C
Explanation:
1.4. SP high end product
A minimum of one LCC and one FCC are required to configure a multishelf system.
Q8. DRAG DROP
Drag each resiliency mechanism on the left to its corresponding technology on the right.
Answer:
Q9. The following MPP configuration is applied on RA router: RP/0/RSP0/CPU0:RA#sh running-config control-plane
control-plane
management-plane
inband
interface TenGigE 0/0/0/0
allow SSH peer
address ipv4 5.0.0.0/8
Which two pieces of information are correct in regards to management traffic on RA router? (Choose two)
A. SNMP traps going out on TenGigE 0/0/0/0 interface are dropped.
B. SNMP polling coming through TenGigE 0/0/0/0 interface are dropped.
C. Telnet connections coming through MgmtEth0/RSP0/CPU0/0 interface are accepted.
D. SSH connections coming through TenGigE 0/0/0/0 interface from 5.5.5.5 host are accepted.
E. TACACS traffic going through TenGigE 0/0/0/0 interface are dropped.
Answer: B,D
Q10. A network engineer wants to deploy a solution that allows for 200 DS1 s and 100 DS0s that are multiplexed to a single interface on a Cisco 7600 Series Router. Which interface type satisfies this requirement?
A. Channelized T3/E3 (DS0)
B. Channelized OC-12/STM-4
C. OC-12/STM-4
D. OC-48c/STM-16
Answer: B