Proper study guides for Most recent Cisco Implementing Cisco Service Provider Mobility UMTS Networks (SPUMTS) certified begins with Cisco 600-210 preparation products which designed to deliver the 100% Guarantee 600-210 questions by making you pass the 600-210 test at your first time. Try the free 600-210 demo right now.


2026 New 600-210 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/600-210/

Q1. Which option describes the ICAP protocol? 

A. ICAP is a protocol designed to enable inter-device communications for different vendor systems to share information about subscribers in a common format. ICAP allows for subscriber session control for actions such as session disconnect and suspension. 

B. ICAP is a protocol designed to enable subscribers to communicate in a peer-to-peer network for file sharing purposes and is often used to circumvent upstream content filtering. 

C. ICAP is a communication access package consisting of a mixed platform of services such as web, FTP, and authentication. ICAP is used to minimize the deployment footprint and expedite new offerings for Internet service providers. 

D. ICAP is a protocol designed to support dynamic content filtering, insertion, and modification of web pages. ICAP allows interaction with external content servers such as parental control (content filtering) servers to provide content filtering service support. 

Answer: D 

Q2. Which two services does GPRS support? (Choose two.) 

A. MMS 

B. SMS 

C. Video Calling 

D. EMM 

E. ESM 

Answer: A,B 

Q3. In which two ways does SGSN detect and know when GGSN has restarted? (Choose two.) 

A. change in recovery value in echo response 

B. change in recovery value in PDU notification request from GGSN to SGSN 

C. change in recovery value in Update PDP Context Request from GGSN to SGSN 

D. when the sequence number in a response message is different from that of the request message 

E. when the TEID value in response in GTP header is different from that of the request message 

Answer: A,C 

Q4. Which two parameters are used on the Cisco ASR 5000 GGSN to build the RADIUS authentication attribute Acct-Session-ID, sent within the RADIUS Disconnect-Request? (Choose two.) 

A. charging-ID 

B. IMSI 

C. RADIUS client IP address 

D. NSAPI 

E. framed-IP-address 

F. username 

Answer: A,C 

Q5. Into which state does a UE in a GPRS network move after the ready timer expires? 

A. idle state 

B. detached state 

C. suspended state 

D. ready state 

E. standby state 

Answer: E 

Q6. Your company is adding additional subscriber IP network ranges and requires many-to-one NAT to be configured on the Cisco ASR 5000 for the subscriber IP network 10.11.23.0/24. The public IP range is 172.20.21.20 172.20.21.110, and each IP has no more than 100 subscribers. 

Which configuration option accomplishes this task? 

A. active-charging service ACS_ACME access-ruledef apn_cisco ip src-address = 10.11.23.0/24 fw-and-nat policy base_1 access-rule priority 1 access-ruledef apn_cisco permit nat-realm nat_pool1 nat policy nat-required default-nat-realm nat_pool1 rulebase acme_rulebase fw-and-nat default-policy base_1 context cisco ip pool nat_pool1 range 172.20.21.20 172.20.21.110 napt-users-per-ip-address 100 

B. active-charging service ACS_ACME access-ruledef apn_cisco ip src-address = 10.11.0.0/16 fw-and-nat policy base_1 access-rule priority 1 access-ruledef apn_cisco permit nat-realm nat_pool1 nat policy nat-required default-nat-realm nat_pool1 rulebase acme_rulebase fw-and-nat default-policy base_1 context cisco ip pool nat_pool1 range 172.20.21.20 172.20.21.110 napt-users-per-ip-address 1000 

C. active-charging service ACS_ACME access-ruledef apn_cisco ip src-address = 10.11.23.0/24 nat-and-pat policy nat_1 access-rule priority 1 access-ruledef apn_cisco permit nat-realm nat_pool1 nat policy nat-required default-nat-realm nat_pool1 context cisco ip pool nat_pool1 range 172.20.21.20 172.20.21.29 napt-users-per-ip-address 100 

D. active-charging service ACS_ACME access-ruledef apn_cisco ip src-address = 10.11.23.0/24 fw-and-nat policy base_1 access-rule priority 1 access-ruledef apn_cisco permit nat-realm nat_pool1 nat policy nat-required default-nat-realm nat_pool1 rulebase acme_rulebase fw-and-nat default-policy base_1 context cisco ip pool nat_pool1 range 172.20.21.20 172.20.21.29 napt-users-per-ip-address 100 

Answer: A 

Q7. For inbound Inter-System RAU, which message sends the SGW change indication to the old SGSN? 

A. context request 

B. context response 

C. context acknowledgment 

D. modify bearer request 

E. modify bearer response 

Answer: C 

Q8. Which organization developed and maintains the Universal Mobile Telecommunications System? 

A. 3GPP2 

B. 3GPP 

C. ITU 

D. ANSI 

Answer: B 

Q9. Which two configurations are required for narrow band SS7 configuration in the Cisco ASR 5000 system? (Choose two.) 

A. link type configuration in the SS7 routing domain 

B. framing type configuration at the card level 

C. SCCP network association at the port level 

D. Iu-PS service association at the port level 

E. peer server configuration at the SS7 routing domain 

Answer: A,B 

Q10. How does an S4-SGSN identify a peer node as an SGSN or MME when GUTI-to-RAI mapping is unavailable? 

A. MSB of the LAC value 

B. MSB of the RAC value 

C. LSB of the LAC value 

D. LSB of RAC value 

Answer: A