Master the ccna data center dcict 640 916 official cert guide pdf Introducing Cisco Data Center Technologies - DCICT content and be ready for exam day success quickly with this Exambible ccna data center dcict 640 916 official cert guide practice. We guarantee it!We make it a reality and give you real 640 916 dumps questions in our Cisco ccna data center dcict 640 916 official cert guide pdf braindumps.Latest 100% VALID Cisco ccna data center dcict 640 916 official cert guide Exam Questions Dumps at below page. You can use our Cisco cisco 640 916 braindumps and pass your exam.
2026 New 640-916 Exam Dumps with PDF and VCE Free: https://www.surepassexam.com/640-916-exam-dumps.html
Q1. A network engineer wants to configure switch ports on Cisco Nexus 2000 and 2200 Fabric Extender switches that are connected to a Cisco Nexus 5500 Series Switch. Which three options allow this configuration? (Choose three.)
A. Connect to each of the Cisco Nexus 2200/2000 switches using Telnet, then configure the FEX switch ports.
B. Connect to a Cisco Nexus 5500 using a console cable, then configure the FEX switch ports.
C. Connect to each of the Cisco Nexus 2200/2000 switches using a console cable, then configure the FEX switch ports.
D. Connect to each of the Cisco Nexus 2200/2000 switches using SSH, then configure the FEX switch ports.
E. Connect to a Cisco Nexus 5500 switch using SSH, then configure the FEX switch ports.
F. Connect to a Cisco Nexus 5500 using Telnet, then configure the FEX switch ports.
Answer: B,E,F
Q2. Which two options are two functions of the data center core layer? (Choose two.)
A. manages access control and policy
B. enables routing between VLANs
C. creates separate collision domains
D. acts as a high speed egress point
E. implements security policy
F. provides a resilient Layer 3 routed fabric
Answer: D,F
Q3. Which two are valid block-based storage protocols? (Choose two.)
A. Telnet
B. SSH
C. iSCSI
D. Fibre Channel
E. NFS
F. CIFS
Answer: C,D
Q4. What are three advantages to running FabricPath in the data center over using Spanning Tree? (Choose three.)
A. provides multichassis EtherChannel capabilities
B. improves convergence times
C. uses TTL field to provide loop mitigation
D. allows every switch to send BPDUs to each other to ensure the L2 topology is synchronized
E. has L2 multipath forwarding capabilities
F. uses 802.1q trunks to ensure VLANs are propagated through the topology
Answer: B,C,E
Q5. Refer to the exhibit. A network engineer is migrating the existing switching infrastructure to a proposed model. Which technology is enabled on the Cisco Nexus switches to support this migration to its future status?
A. PAgP
B. VSS
C. VPC
D. FCoE
Answer: C
Q6. Which two are functional layers of a collapsed-core LAN design? (Choose two.)
A. core
B. aggregation
C. access
D. distribution
E. services
Answer: A,C
Q7. Which component of Cisco UCS B-Series is also referred to as a FEX?
A. UCS 5108
B. UCS 2104XP
C. UCS 6248UP
D. UCS 6120
E. UCS MK72-KR
Answer: B
Q8. OTSPOT
Answer:
119. For which task is the hypervisor responsible in a virtualized server environment?
A. controls physical hardware resources
B. migrates virtual machines via vMotion
C. correlates traffic between physical servers
D. installs virtual machine operating systems
Q9. A network engineer needs to add four native Fibre Channel ports to a pair of UCS fabric interconnects. What two items would be the result of the engineer configuring four universal ports in the fabric interconnect expansion card for storage mode and selecting apply? (Choose two.)
A. The fabric interconnect port module reboots.
B. The fabric interconnect reboots.
C. The ports immediately transition to storage ports.
D. The ports are reconfigured as Fibre Channel storage ports.
E. The ports are reconfigured as Fibre Channel host adapter ports.
Answer: A,D
Q10. On the Cisco Nexus 5000, which three commands help verify network connectivity? (Choose three.)
A. ping
B. show interface brief
C. show otv
D. show vdc membership
E. traceroute
Answer: A,B,E