What High value 648-238 dumps Is?

Q1. Which Cisco IP Video Surveillance camera(s) allow for video to be stored locally (with optional storage accessory) in the event of losing network connectivity? 

A. Up to 16 GB of storage on 4300E and 4500E cameras 

B. Up to 8 GB of storage on 4300E and 4500E cameras 

C. Up to 8 GB of storage on 4300, 4300E, 4500, and 4500E cameras 

D. Up to 4 GB of storage on 2600 and 2900 series cameras 

View Answer

Q2. Which of the following Cisco products can natively pull video streams and camera hierarchy from the Cisco Video Surveillance system? 

A. Cisco Works 

B. Cisco Physical Access Manager 

C. Cisco Prime 

D. Cisco UCS Manager 

View Answer

Q3. On a properly qualified client PC that meets workstation requirements, streaming video appears choppy with ghosting artifacts, but recorded clips that have been extracted and saved to the local PC do not display any quality issues. What is the most common cause of this problem? 

A. H.264 video needs to "settle" in the recording for best quality 

B. Network path congestion, QoS, and/or bandwidth issues 

C. Camera problem 

D. Video card driver 

View Answer

Q4. Which of the following product families is a building block for a Cisco Borderless Network Architecture, designed specifically for branch deployments, and is capable of simultaneous LAN and WAN connectivity, security, mobility, voice, video, and customized applications such as Cisco Video Surveillance on a single platform? 

A. Cisco UCS 

B. Cisco Catalyst 3750-X Series Multilayer Switches 

C. Cisco 2600/3700 Series Multiservice Routers 

D. Cisco 2900/3900 Series Integrated Services Routers 

E. Cisco Wide Area Application Services 

View Answer

Q5. Refer to the exhibit. 

Cameras and a Cisco VSM server are connected to a Layer 2 switch. 

Which three steps will allow the Cisco VSM servers to see video traffic from the two IP cameras? (Choose three.) 

A. GigE 0/10 should be configured to accept traffic from all VLANs using the #switchport mode access vlan all command. 

B. GigE 0/10 should be configured to dynamic mode using the #switchport mode dynamic desirable command. 

C. Implement "router-on-a-stick". 

D. Implement inter-VLAN routing. 

E. The link between GigE 0/5 and FE 1/1 should be configured as a trunk port. 

View Answer

Q6. Which four Cisco IP camera families natively support medianet? (Choose four.) 

A. Cisco 2900 Series IP Cameras 

B. Cisco 3000 Series IP Cameras 

C. Cisco 4000 Series IP Cameras 

D. Cisco 5000 Series IP Cameras 

E. Cisco 6000 Series IP Cameras 

F. Cisco 7000 Series IP Cameras 

View Answer

Q7. What is the approximate total usable drive capacity for a CPS-MSP-1RU-K9 populated with 4 x 1 TB HDDs? 

A. 1 TB 

B. 2 TB 

C. 3 TB 

D. 4 TB 

View Answer

Q8. Which way of upgrading the Cisco VSM 7.x does Cisco recommend? 

A. via the management console web interface and .RPM files 

B. via the management console web interface and .ZIP file 

C. via Linux commandline:Stop Cisco Services - Uninstall existing RPM files - Install new RPM files - Restart Cisco Services 

D. via an upgraded USB/DVD image 

View Answer

Q9. When setting up a dual stream configuration, you should do which of the following? 

A. Configure the primary stream in VSOM and configure the secondary stream directly on the camera. 

B. Configure the primary and secondary streams directly on the camera first before adding the camera to VSOM. 

C. Configure both the primary and secondary streams from VSOM. 

D. It does not matter, since streams can be configured on VSOM or on the camera. 

View Answer

Q10. A new VSMS server has been added to VSOM, but the storage capacity says "No Repositories." What should you do in order to resolve this? 

A. Restart VSOM 

B. Delete the newly added VSMS server from VSOM, and re-add the server 

C. The HDDs are faulty. Replace the HDDs in the newly added media server 

D. Configure the Local Repositories setting from the VSMC page of the newly added media server 

View Answer