What Vivid 7003 exam question Is?

New Questions 2

A customer is installing a new common processor Media Gateway (CPMG) in a Communication Server (CS) 1000E system. They are connected to the backplane serial port 0 of the MGC to access the configuration menu. No IP information exists for the MGC.

How does the customer access the configuration menu for the MGC?

A. Type u201cmgcsetupu201d on the screen.

B. No action required. The MGC will boot directly into the setup menu.

C. The prompt u201cPress any key to stop auto-boot enter mgcsetupu201d appears.

D. Enter a shell command : <CTRL>0<CTRL>M, provide OAM username and password to access OAM shell.

View Answer

New Questions 3

A technician deployed a Communication Server 1000E with dual homing feature configured. Both the T and 2T ports are connected on the media Gateway Controller (MGC) one connection is active to avoid network loops.

Which two statements are true, if the connection to the active port on the MGC is host? (Choose two)

A. The MGC will issue a link down error.

B. The MGC will switch to the active pert.

C. The MGC and CPPM will have no loss of service.

D. The MGC will switch to the active port after 12 seconds.

View Answer

New Questions 4

A technician has deployed a Communication Server 1000 Rls. 7x system at their site. You are using the Virtual Terminal to access Communication Command line interface (CLI) to add telephone.

Which Overlays (LDs) are linked to eliminate the need for existing one Overlay (LD) and entering another one?

A. LD 10, 11, 15 and 20

B. LD 10, 11, 20 and 32

C. LD 10, 11, 20 and 30

D. LD 20 and 32

View Answer

New Questions 5

A technician is upgrading an existing Option 11C 5.5 system to a Communication Server (CS) 1000E Rls. 7x Standard Availability with a single media Gateway 1000E chassis. A CPMG Co-Resident Server card is being deployed during the upgrade. This is a stand- alone system that is not part of a larger network so the CPMG will act as its own Primary Server.

Which application should be deployed on the CPMG server for this customer?

A. CS+SS+EM

B. CS+SS+SIPL

C. CS+SS+SubM

D. CS+SS

View Answer

New Questions 6

A customer has completed the security configuration for the security servers in the Avaya Aura integrated system. The System is using Avaya Aura System Manager as the Primary Security Server. The Customer is accessing the Base manager of each Server from the Element list to perform base configuration changes. Aaa Base Managers are accessible except the primary server; When Clicking on the Primary Server, the customer is taken to the System Manager Dashboard page.

What is the recommended course of action for the customer?

A. Log into the System Manager command to access Base Manager.

B. On the system Manager Console, access UCM Roles to change access Privileges.

C. No action is required; System Manager does not have an associated base Manager.

D. Log into Base Manager of the Primary Security server using local-login to access the Base Manager.

View Answer

New Questions 7

A customer with a Communication Server (CS) 1000E at Rls. 5.5 with two IPMG is upgrading the system to CS 1000E SA release 7 x. The second media gateway includes a media Gateway Controller card with one high density DSP daughter board.

How many voice channels does this configuration provide?

A. 32

B. 64

C. 96

D. 128

View Answer

New Questions 8

A technician is upgrading an option 11C Rls. 5x to a communication server 1000E SA Rls. 7x based on a CPPM CS, COTS SS with 4 chassis media gateway (MG), 100IP sets, 124 digital sets, 30 analog sets and one PR12 DID connection for the incoming and outgoing

calls cannot be made from all type of the sets except for the sets in MG3.

When the technician is finished with the upgrade it is noticed during the acceptance testing that outgoing calls cannot be made from all type of the sets except for the sets in mG3. All the sets have dial tone.

Which statement describes what is causing this issue?

A. The PR 12 loop disabled in MG3

B. The DB 128 is not installed in MG3

C. The COTS Signaling Server is faulty

D. All MGs are unregistered except MG3

View Answer

New Questions 9

A customer has a Communication Server (CS) 1000 Rls. 7x Co-Resident system, and needs to access the Call Server Overlay Shell to use the Call Server Overlay commands.

Which two commands are used to access the Call Server Shell? (Choose two)

A. cspdt

B. cslogin

C. csaccess

D. csconsole

View Answer

New Questions 10

A customer is preparing to install software on the CPMG server and would like to display the boot sequence on the system terminal for the BIOS, BOOT ROM, and operating System.

Which port on the CPMG server provides this information?

A. Frontface TTY port 2

B. Frontface TTY PORT 1

C. Backplane 3-port connection TTY port 0

D. Frontface embedded LAN (ELAN) port 0

View Answer

New Questions 11

A customer has installed a Media gateway controller (MGC) and would like to change the baud rate settings for the SDI parts. The baud rates for all serial Data Interface (SDI) ports on the MGC are configurable through call server?

Which overlay is used to configure the MGC SDI ports?

A. LD 137

B. LD 117

C. LD 97

D. LD 17

View Answer