Practical Avaya 7004 vce

New Questions 2

You have just created 10 new 1140E IP DeskPhone for your customer using Element

Manager. Using accessing Subscriber Manger to assign the users to those newly created telephones, you notice that the telephones do not appear in Subscribe Manager database.

Which Subscriber Manager synchronization mechanism updates the Subscribe Manger database with the Communication Server 1000 Element Manger database?

A. Synchronize Accounts

B. Synchronize Job

C. Synchronize Subscribers

D. Synchronize Locations

View Answer

New Questions 3

In order for Zone Based Dialing On-Net Call routing (Inter-site) to be used, users are required to dial an E.164 number (either International or National number), for calls between sites.

For this to be true, and for the system to pass the proper Calling Line ID (CLID), which prompt must be configured?

A. The D1ALPLAN prompt must be configured to PPV.

B. Country Code, NPA and NXX must be configured within the ZBD IE of an ISDN message

C. The DIALPLAN prompt in CDB must be configured to PUB.

D. ZBD option in the Customer Data block must be configured to PUB.

View Answer

New Questions 4

Click the Exhibit button.

Refer to the customeru2021s dialing plan and programming show in the exhibits.

Assuming all required Route List Indexes have been programmed, why will the station user's dialed call of 8-1-717-398-8001 not complete?

A. AC2 Access Code was not dialed

B. NPA 1717 is not provisioned in the customer's database

C. 398-8001 would be denied under the SDRR programming

D. AC1 Access Code was not dialed

View Answer

New Questions 5

Click the Exhibit button.

Consider the a customeru2021s dialing plan shown in the exhibit, which detail on-net and off-net dialing requirements:

TIE trunks between Location A and Location B are currently out of service.

TIE trunks between Location B and Location D are currently out of service. All over TIE trunks are fully functional.

Which route will a call to LOC 304-2001 take if it originates from location B?

A. TIE BD to Location D.

B. TIE AB to Location A.

C. TIE BD to Location D, then TIE CD to Location C then TIE AC to Location A

D. The call will not leave the originating PBX

View Answer

New Questions 6

With Automatic On-Net to Off-Net Overflow, if all on-net facilities such as TIE trunks between locations are busy, NARS can convert a dialed UDP number to a Listed Directory Number of the applicable DID number at that location and use off-net facilities, such as CO

trunks, to complete the call. When provisioning Automatic On-Net to Off-Net Overflow, which parameter is not correct?

A. Only one Listed Directory Number can be defined per Location Code (LOC).

B. Multiple NPAs per Location Code are allowed.

C. Multiple NXX codes per Location Code can be defined.

D. Multiple ranges of DNs within each NXX per Location Code can he defined.

View Answer

New Questions 7

Click the Exhibit button.

Consider the customeru2021s current programming:

NCOS of 2 = FRL of 2

Class of Service on all sets is CTD

With reference to the exhibit, how would you modify Route List Index 1 to permit all station users with an NCOS of 2 to place 1+912 calls?

A. Change FRL on Route List Index 1 to FRL 1

B. Change FRL on Route List Index 1 to FRL 4

C. Change FLI on NPA entry for 1214 to RLI 2

D. Leave all existing programming as is.

View Answer

New Questions 8

Click the Exhibit button.

A customer requires that two of its employees be able to place toll calls to Australia, while all other employees are restricted to local dialing only. The customeru2021s Communication Server 1000 is programmed with all required NCOS, FRL and Route List Index (RLI).

What is the most restrictive NCOS to assign to the two employees required to make toll call Australia given the tables, assuming that the call must complete over RLI 2 and the user must be able to use any RLI 2 entry to reach Australia?

A. NCOS 1

B. NCOS 2

C. NCOS 3

D. NCOS 4

E. NCOS 5

View Answer

New Questions 9

A company recently deployed IP telephones in its Call Center. During peak traffic conditions, callers receive an overflow tone and calls are blocked.

Zone Number = 1 Zone Intent = MO

Intrazone Traffic = Best Quality Interrone Traffic = Best Bandwidth Resource Type = Shared

Which programming change is recommended to provide dedicated Digital Signal Processor (DSP) resources to Contact Center IP telephones?

A. Change Zone Intent VTRK

B. Change Resource Type to Private

C. Change Interzone to Best Quality

D. Change Interzone Traffic to Best Bandwidth

View Answer

New Questions 10

An enterprise has a network with Communication Server 1000E systems running RIs 7 x IP Peer Network. For this network, when are the Digital Signal Processor (DSP) resources required?

A. when a compressed media channel is required without circuit switching

B. when interworking is necessary to third-party SIP-enabled products

C. when it is necessary to transcode between IP and circuit-switched devices

D. when interworking is necessary to third-party H.323-enabled products

View Answer

New Questions 11

Click the Exhibit button.

You manage a Communication Server 1000 RIs. 7 x system at a customer site. The customer reports that extension 2000 cannot make an unassisted long distance calls.

With reference to the exhibit, which feature is restricting the user?

A. CCBA

B. CCSA

C. CLRO

D. CLS

View Answer