Real Avaya 76940X Dumps Online

NEW QUESTION 1
Which functionality does Management Server Console (MSC) provide?

• A. Common installation, upgrade and infrastructure maintenance tasks on the ACP 4200, and delivery of all the software and firmware binaries including main releases and patches for ACP 4200
• B. MIB browser and MIB query tool which can be used to browse and query the MIB
• C. Discovery and visualization of all ACP 4200 components including routers, switches, Avaya Aura® servers and applications, storage arrays, IP telephones, Avaya Session Border controllers, Media gateways and VM hosts.
• D. Layered dashboards for health monitoring, diagnostics, performance, analytics and reporting

Answer: C

NEW QUESTION 2
A support engineer is tasked with upgrading a CPOD 2.1 system to ACP 4200 4.0. Which statement about the upgrade process is true?

• A. Upgrading a CPOD 2.1 system to ACP 4200 4.0 is supported, and a direct upgrade path is supported.
• B. Upgrading a CPOD 2.1 system to ACP 4200 4.0 is supported only if the Rack enclosure is replaced with a new 48 Inch Deep Model.
• C. Upgrading a CPOD 2.1 system to ACP 4200 4.0 is not supported.
• D. Upgrading a CPOD 2.1 system to ACP 4200 4.0 is supported, but a direct upgrade path is only partially supported.

Answer: B

NEW QUESTION 3
A support engineer is upgrading a PodFX 3.1 system to ACP 4200 4.0, and is upgrading the Extreme Network VSP switches to release 7.1.
Which two applications available on the on the MSC would the engineer typically use for the upgrade process? (Choose two.)

• A. Avaya Orchestrator
• B. PuTTY
• C. WinSCP
• D. Enterprise Device Manager

Answer: AD

NEW QUESTION 4
A support engineer is tasked with working on an ACP 4200 4.0 system.
Which three pieces of equipment would the engineer expect to find in the rack that will differentiate the system from an earlier release of PodFx 3.X or CPOD 2.X? (Choose three.)

• A. Dell R601 Servers
• B. VSP 4824
• C. HP Nimble Storage CS1000
• D. HP Proliant DL360 G10 Servers
• E. VSP 7254

Answer: BCD

NEW QUESTION 5
What is the primary purpose or function of Enterprise Device Manager (EDM)?

• A. EDM provides an interface for administrator to monitor the health of the Nimble Storage array in a single pane and allows them to make changes to storage, protection, access, and performance configuration.
• B. EDM provides access to HP Proliant Servers’ out-of-band management facilitie
• C. It allows for control and monitoring of HP servers.
• D. EDM is the device management software application for Extreme Network's VSP platforms.
• E. EDM provides a robust web interface which allows for monitoring of the ServerTech PDU and control of its individual power outlet.

Answer: C

NEW QUESTION 6
Refer to the exhibit.

When a support engineer navigates to Orchestrator’s Rack View of an ACP 4200 system, the engineer notices that the V1-V6 slots on the right of the diagram are not populated.
What could be causing this problem?

• A. V1-V6 are used to represent Virtual Machines which are not present in this particular system.
• B. V1-V6 are used to represent Vertical PDUs which are not present in this particular system.
• C. V1-V6 are used to represent G450 Media Modules which are not present in this particular system.
• D. V1-V6 are only used for ACP 100 systems.

Answer: A

NEW QUESTION 7
A support engineer is upgrading a PodFX 3.1 system to ACP 4200 4.0. The system has two pairs of ServerTech PDUs.
Which statement about the PDU firmware file describes the upgrade process that the engineer needs to follow?

• A. It will need to be uploaded to all 4 PDUs.
• B. It will need to be uploaded to each PDU Management Web Interface.
• C. It will need to be uploaded to one PD
• D. This PDU will then distribute the file to the remaining 3 PDUs.
• E. It will need to be uploaded to Orchestrato
• F. Orchestrator will then distribute the file to the 4 PDUs.

Answer: C

NEW QUESTION 8
A support engineer is tasked to power down a VSP switch using the management tools available for the ACP 4200.
Which statement is true about how the engineer would accomplish this task?

• A. Login to Enterprise Device Manager and use the chassis power down option.
• B. Login to Servertech PDU Web Interface and use the outlet control option.
• C. This can only be done if the engineer is on-site to switch off the VSP’s power switch.
• D. This can only be done if the engineer is on-site to remove the VSP’s power cable.

Answer: A

NEW QUESTION 9
A support engineer is assigned to provide maintenance services for an ACP 4200 4.0 system.
Which type of organization could the engineer expect to be assigned to?

• A. Small Business services
• B. Service Providers
• C. Large Enterprises
• D. Large Enterprises & Service Providers

Answer: C

NEW QUESTION 10
A support engineer logs into Avaya Orchestrator and clicks on the Service Availability icon for the Power Supply of a G450 device.
What information is the engineer looking for?

• A. The current state of the power supply (OK, Warning, Unknown or Critical).
• B. The amount power (in Watts) that the power supply is using.
• C. A percentage breakdown of the state of the power supply (OK, Warning, Unknown or Critical) over a period of time.
• D. A list of other services that are available for the G450 device.

Answer: A

NEW QUESTION 11
A PodFX system is being upgraded to ACP 4.0 and Avaya Orchestrator needs to have an IP address assigned. What would Avaya recommend for Orchestrator’s IP address?

• A. Assign an unused IP address in the Management VLAN range for the Orchestrator.
• B. Re-use the PVM IP address for Orchestrator.
• C. Re-use the VPFM IP addresses for Orchestrator.
• D. There is no recommendation on which IP address to use for Orchestrator.

Answer: A

NEW QUESTION 12
You are receiving High Availability warnings in the vSphere client. To resolve the issue, what would you try first?

• A. Stop and restart VMs.
• B. Ensure Storage Array is reachable from VSP.
• C. In the cluster, check cabling between server and storage array.
• D. Right-click each Host in the cluster and select Reconfigure for HA.

Answer: B

NEW QUESTION 13
A support engineer is upgrading a PodFX 3.1 system to ACP 4200 4.0, and is upgrading the VMware vCenter Server from Release 6.0 to Release 6.5.
Which three tasks are required as part of the upgrade process? (Choose three.)

• A. Replace the old HP server with a new HP DL360 D10 server.
• B. Identify the IP address and root account credentials of the ESXi host where the current vCenter Server appliance resides.
• C. Obtain the VMware vCenter Server 6.5 license file.
• D. Obtain the VMware vCenter Server 6.5 upgrade file.
• E. Identify the IP address and root account credentials of the ESXi host where the new vCenter Server appliance will be deployed.

Answer: BDE

NEW QUESTION 14
Service warning alarms are being received by Orchestrator indicating that Port 27 on VSP 4850-1 is down. How would a support engineer determine the equipment that is connected to this port?

• A. Network Diagram in the Lifecycle Workbook
• B. Switch Wiring tab in the Lifecycle Workbook
• C. ACP Installation Guide
• D. Physical inspection

Answer: D

NEW QUESTION 15
What would a support engineer expect to find when using MSC to support, troubleshoot and maintain the ACP 4200 4.0?

• A. All current and previous license files
• B. Software library store
• C. Pod Upgrade Manager (PUM)
• D. VMware vSphere client application for VMware 6.5

Answer: D

NEW QUESTION 16
......