All About Free DES-6322 Questions

NEW QUESTION 1
A company needs to enable vSphere GPU capabilities on their VxRail cluster. To do so, they need to purchase a specific entitlement.
What licensing satisfies this requirement?

• A. vSphere Enterprise Plus
• B. vSAN Enterprise Plus Edition
• C. vSAN Advanced Edition
• D. vSphere Standard

Answer: B

NEW QUESTION 2
A company has recently implemented a popular date center monitoring and reporting software solution. They plan to use the solution to consolidate reporting into a single platform.
What is an expected benefit of programmatically gathering VxRail information?

• A. Perform node shutdowns and specific operations
• B. Perform pre-checks for vSAN health
• C. Automate iDRAC firmware management and status
• D. Obtain status of all running operations on a cluster

Answer: B

NEW QUESTION 3
For which VxRail models must the iDRAC NIC Selection be set to Dedicated?

• A. D, G, P, S, and V Series
• B. E, P, S, and V Series only
• C. D, E, P, S, and V Series
• D. D, E, and G Series

Answer: D

NEW QUESTION 4
Which two files are used to automate VxRail deployment and validate the network configuration?

• A. Appliance JSON file PEQ data file
• B. VxRail Configuration Portal PEQ data file
• C. VxRail Test Plan SPEQ
• D. Appliance JSON file SPEQ

Answer: A

NEW QUESTION 5
A systems engineer needs to ensure that the VxRail system is healthy and any issues found are addressed prior to starting an upgrade process. Where in the vSphere Client can they review alarms and overall vSAN health?

• A. Triggered Alarms > Issues and Alarms > All issues Triggered Alarams > vSAN > Skyline Health
• B. Monitor > All Issues > Issues and Alarms Monitor > vSAN > Health
• C. Triggered Alarms > All Issues > Issues and Alarms Triggered Alarms > vSAN > Health
• D. Monitor > Issues and Alarms > All issues Monitor > vSAN > Skyline Health

Answer: B

NEW QUESTION 6
An implementation engineer places a VxRail node into maintenance mode using the Ensure accessibility setting What is the engineer likely planning to do?

• A. Extensive maintenance
• B. Temporary maintenance
• C. Permanent removal of host from cluster
• D. Shutdown of an entire cluster

Answer: A

NEW QUESTION 7
From what location should NVT for VxRail be run?

• A. Jump server on a different network
• B. Workstation on the same network as VxRail Manager
• C. VxRail network Top of Rack switch
• D. Laptop connected to the first VxRail ESXi node

Answer: B

NEW QUESTION 8
An implementation engineer is performing a precheck on a VxRail cluster before expansion. During validation, they find out that the host is not compatible.
Use the VxRail simulator to describe why the host is Incompatible.
Note: It is necessary to close (x) the simulator window before you can select a response to this question.

• A. bmc and bios are running older versions
• B. Insufficient number of vSphere licenses
• C. Firmware of ESXi host needs to be updated
• D. Invalid vCenter 5erver license

Answer: D

NEW QUESTION 9
Match each VxRail, data protection solution with its functionality.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 10
An implementation engineer is in the validation phase of a VxRail deployment with two Dell EMC ToR switches. Which command should they run on each of the ToR switches to validate that Link Aggregation has been configured according to Dell best practices for VxRail node interfaces?

• A. show network-policy profile
• B. show interface status
• C. show port-channel summary
• D. show interface

Answer: A

NEW QUESTION 11
In a VxRail Stretched Cluster deployment of 8 nodes on between sites?

• A. Primary to Witness site RTT: < 250 ms Secondary to Witness site RTT; < 250 ms Primary to Secondary site RTT: < 5 ms
• B. Primary to Witness site RTT: < 150 ms Secondary to Witness site RTT: < 150 ms Primary to Secondary site RTT: < 10 ms
• C. Primary to Witness site RTT: < 200 ms Secondary to Witness site RTT: < 200 ms Primary to Secondary site RTT: <: 5 ms
• D. Primary to Witness site RTT: < 200 ms Secondary to Witness site RTT < 200 ms Primary to Secondary site RTT: < 10 ms

Answer: B

NEW QUESTION 12
Which command can be used from the VxRail Manager VM to restart the loudmouth daemon?

• A. systemctl restart loudmouth
• B. /usr/lib/vmware/loudmouth/bin/loudmouthd restart
• C. /etc/init.d/loudmouth restart
• D. systemctl restart vmware-loudmouth

Answer: D

NEW QUESTION 13
What is a consideration when adding nodes to a VxRail G Series chassis?

• A. G560 and G410 nodes are permitted in the same chassis
• B. In a full G Series chassis, all nodes must have 10GbE ports
• C. Hybrid and All-Flash nodes are permitted, if in different chassis
• D. All nodes in a G Series chassis must be identical

Answer: D

NEW QUESTION 14
When preparing to generate an As-Built Configuration Report, it is determined that the VxRail Configuration JSON file was not saved from the Deployment Wizard. What actions must be taken to retrieve the JSON file?

• A. SSH to the VxRail Manager VM with the mystic user SU to rootGo to the /opt/VxRail/config directorySCP the initial-config json file to a local location
• B. Log in to vCenter with the vSphere Client with the vCenter Server Management user Go to Monitor > VxRail > Last Configuration Data SentUse the Download option
• C. Open an FTP connection to the VxRail Manager VM with the mystic user Go to the /var/lib/vmware-marvin directoryGET the config-initial json file
• D. Log in to vCenter with the vSphere Client with the vCenter Administration user Go to Configure > VxRail > SystemUse the Product Documentation option

Answer: B

NEW QUESTION 15
Match each VxRail API request with the information to be retrieved.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 16
What is a requirement for the vSAN Data-at-Rest Encryption?

• A. All-Flash or AII-NVMe VxRail
• B. VxRail with at least 3 nodes
• C. External Key Management Server
• D. External customer provided vCenter

Answer: C

NEW QUESTION 17
What is a difference between vSAN Data-In-Transit Encryption and vSAN Data-At-Rest-Encryption?

• A. Data-In-Transit Encryption: Encrypts traffic between VMs and the VxRail nodes Data-At-Rest Encryption: Encrypts traffic between VxRail nodes only
• B. Data-In-Transit Encryption: Does not require a Key Management Server Data-At-Rest Encryption: Requires a Key Management Server
• C. Data-In-Transit Encryption: Key Management Server must reside on the vSAN cluster Data-At-Rest Encryption: Key Management Server can reside on the vSAN cluster
• D. Data-In-Transit Encryption: Addresses fear of media theftData-At-Rest Encryption: Addresses fear of rogue administrators

Answer: A

NEW QUESTION 18
A systems engineer is performing a VxRail upgrade in a VMware Horizon VDI cluster All hosts are put in Maintenance Mode.
What action does the engineer need to perform on each host once the upgrade has been completed?

• A. From the Connection Server run IcMaintcmd to delete the parent VMs and exit Maintenance Mode for each host
• B. From the Connection Server, run IcMaintcmd to take the hosts out of Maintenance Mode and reboot them
• C. Set the InstantClone Maintenance annotation value to the original value
• D. Set the InstantClone Maintenance annotation value to 2

Answer: A

NEW QUESTION 19
What is a consideration when expanding a VxRail cluster? (Choose two.)

• A. Mixing of All-Flash and all-NVMe nodes in a cluster is not allowed
• B. Expanding a cluster to 64 nodes requires a 25 GbE network
• C. G Series clusters can be expanded only with G Series nodes
• D. 1 GbE must be hybrid and single processor node type

Answer: BC

NEW QUESTION 20
......