The Avant-garde Guide To HPE0-J57 Answers

NEW QUESTION 1
You are advising a customer on a new backup strategy to deploy HPE StoreOnce. What should you recommend to ensure the best storage utilization and performance?

• A. consolidate activity windows for housekeeping tasks
• B. size solution for a single backup device
• C. combine management and backup Ethernet traffic
• D. use separate backup targets for different data types

Answer: A

NEW QUESTION 2
A customer needs to upgrade their HPE storage environment, including driver and firmware levels and OS, to the latest version.
Where can you find the needed information about supported versions?

• A. HPE Storage Assessment Foundry
• B. HPE SAN Design Reference Guide
• C. HPE OneView
• D. HPE SPOCK

Answer: D

NEW QUESTION 3
A customer has a SAN infrastructure with the HPE C-class blade Enclosure ,and a mix of proliant G7,gen8 and Ge9 server .They require a new storage platform ... How can you confirm the storage array will be supported in the existing environment?

• A. Check recommended firmware levels in the HP SAN design reference guide to ensure firmware compatibility
• B. Document existing server and SAN information ,and consult SPOCK to ensure firmware compatibility
• C. Design and array with the latest firmware ,and recommend that the customer engage HPE point Next to upgrade the existing hardware
• D. Design an array with older version of the firmware to ensure compatibility

Answer: B

NEW QUESTION 4
A customer has mission-critical applications that intermittently experience heavy disk I/O. The storage speed has the most impact on the application’s performance. The customer does not want to dedicate SSD disks to these applications because additional performance is only needed periodically, and moving the volumes between tiers takes too long.
Which HPE StoreVirtual VSA feature can address this customer’s challenge?

• A. Storage virtualization
• B. Space Reclamation
• C. Thin Provisioning
• D. Adaptive Optimization

Answer: D

NEW QUESTION 5
You are presenting a Nimble solution based on CS3000 hardware to a customer. Which support advantage will be provided with this solution(select two)

• A. Customers always interact with a 3rd level support engineer ,when needed
• B. Customers only have to deploy a service processor for automating support tasks.
• C. Infosight handles the work of 1st and 2nd level support specialist Infosight offers predictive analytics and integration into HPE support center using insight Online.
• D. Infosight performs firmware and software updates without additional administrative support.

Answer: AC

NEW QUESTION 6
A large enterprise is experiencing exponential data growth of their existing Oracle databases. They are concerned about their increasing backup windows and the risk of non-compliance with recovery time objectives increase of data corruption in primary storage. Their primary storage is an 3PAR Storeserv 8400,and their backup target is an HPE StoreOnce System. Which HPE storage solution allow the customer to migrate this risk?

• A. RMC Express protect
• B. Catalyst in-Flight compression
• C. 3 PAR remote copy
• D. StoreOnce unified deduplication

Answer: A

NEW QUESTION 7
When using a HPE 3 PAR Storeserv array to enable a user to apply array–based data services to specific application and VM’s. What is the benefit of implementing VM-level gradually of Volts?

• A. Data sprawls eliminated by performing the migration functions at the array level using 3PAR HPE Dynamic Optimization
• B. Efficiency is maintained by reclaiming space from deleted or migrated VMs using capabilities built into the storage ASIC
• C. Performing is accelerated by detecting and moving the most frequently –accessed VMs into the fast class tier
• D. Performance is accelerated by leveraging the deduplication capabilities built into the storage ASIC

Answer: B

NEW QUESTION 8
Which resource provides configurations for HPE tested and referenced configurations in a software-defined storage environment?

• A. HPE Storage Sizer
• B. One Config Advanced
• C. NinjaStars
• D. StoreVirtual VSA Ready Nodes

Answer: B

NEW QUESTION 9
You are demonstrating adding a new virtual volume for an HPE 3PAR Storeserv array for your customer.in addition to the volume name ,What is the minimum information required to create a virtual volume(select two)

• A. Persona type
• B. Domain
• C. Host
• D. Size
• E. CPG

Answer: DE

NEW QUESTION 10
A customer is concerned about media and transmission errors caused by any component in the I/O stack from the server host bus adapter (HBA) into the HPE 3PAR StoreServ ports.
Which feature will address the customer’s concern?

• A. Persistent Checksum
• B. Persistent Cache
• C. Peer Persistence
• D. Persistent Ports

Answer: A

NEW QUESTION 11
Which functionality available in an HPE 3 Par StoreServ 8400 system that is not available in an HPE 3par Storesrve 7200

• A. Data at Rest Encryption
• B. Persistent Checksum end-to-end data integrity (correct)
• C. Adaptive optimization and dynamic Optimization
• D. Online import license

Answer: B

NEW QUESTION 12
Where does HPE 3PAR StoreServ Data-at-Rest Encryption occur?

• A. ASIC
• B. physical disk
• C. processor
• D. host

Answer: B

NEW QUESTION 13
A customer with restricted budget has an existing HPE 3PAR storeserver 8200 using 10kfast class and near line drives because of the implementation of new application .the workload has shifted to be read intensive therefore ,they want to increase the read I/O performance What should they add to their environment ?

• A. A tier with 15k fast class 600 GB drive for new CPG, configure AO policy to advantage of new resources
• B. Two 400 GB SSD drives and enable adaptive flash cache (page 173) eed to check
• C. A tier with 15k fast class drive and implement thin provisioned deduplicated virtual volumes
• D. A tier of SSD and implement thin provisioned virtual volume

Answer: B

NEW QUESTION 14
A customer has a large deployment of HPE Synergy compute modules, HPE 3PAR StoreServ storage, and HPE StoreOnce systems in a single data center. They are concerned about the risk of data loss due to site disaster.
What is the reason to propose HPE CloudBank?

• A. To easily move workloads to AWS or Azure in the event of site disaster.
• B. To improve RPO/RTO objectives by automating snapshot-based integrating between 3PAR andStoreOnce.
• C. To regularly send backups to the cloud for the purposes of DR protection.
• D. To leverage 3PAR snapshots and utilize StoreOnce recovery capabilities to minimize data loss and downtime.

Answer: C

NEW QUESTION 15
A customer run several HPE 3PAR storeserv system in their environment using data rest encryption .The customer needs to add an HPE 3PAR Storeserv 8000system to the storage pool and an external key manager for all systems.. What is the requirement for this solution?

• A. Boot server for the existing 3PAR storeserv array must be replaced with self-encrypting drive
• B. All drives of the new HPE 3PAR storeserv array must be self-encrypting
• C. HPE ESKM FIPS mode must be disabled by the administrator
• D. Data on the existing HPE 3PAR storeserv array must be decrypted and re-encrypted with new keys

Answer: B

NEW QUESTION 16
Which software feature should an HPE 3PAR Storeserv 8000 customer use to optimize data protection and recovery, Including rapid online recovery for his VMware environment?(select two)

• A. HPE 3PAR Virtual Copy software
• B. HPE 3PAR Remote copy software
• C. HPE 3PAR Security software suite
• D. HPE 3PAR File persona Software suite
• E. HPE StoreOnce recovery manager central for VMware

Answer: AE

NEW QUESTION 17
Which 3PAR storeServ feature allow to host to continue I/O uninterrupted during a firmware update?

• A. Persistent Memory
• B. Persistent port (96)
• C. Peer persistenceD Persistent Cache

Answer: B

NEW QUESTION 18
Which feature enables a non-disruptive environment where host-based multi-pathing software is not affected in the event of a firmware upgrade?

• A. HPE 3PAR Access Guard
• B. HPE 3PAR Persistent Ports
• C. HPE 3PAR Persistent Cache
• D. HPE 3PAR MPIO

Answer: B

NEW QUESTION 19
Which management interface uses four basic commands (Create ,read, update ad delete )to enable administrators to define ad radically simply management processes?

• A. Rest API
• B. WMI
• C. SMI-S
• D. WEBEM

Answer: A

NEW QUESTION 20
Which statement is correct when discussing the RAID layout of an HPE Nimble HF-series storage system?

• A. RAID 6 triple parity is set up -21 data drives are used for RAID stripes.
• B. RAID 6 triple parity is set up -18 data drives are used for RAID stripes.
• C. RAID 6 or RAID 1 can be set up -24 data drives are used for RAID stripes.
• D. RAID 6 or RAID 1 can be set up -18 data drives are used for RAID stripes.

Answer: A

NEW QUESTION 21
......