HP HPE0-S56 Torrent 2021

NEW QUESTION 1
You are troubleshooting an HPE Proliant ML350 Gen server. You determine that the active ROM is corrupt and the system has not automatically switched to the redundant ROM. You need to manually switch the ROM.
What should you do?

• A. Select the backup ROM in the BIOS.
• B. Reset the iLO controller
• C. Change the position of the system maintenance switch options.
• D. Move the system maintenance jumper to pins one and two.

Answer: C

NEW QUESTION 2
You are troubleshooting an HPE ProLiant rack-mount server. You need to collect event data from the server, even when it is not operational.
Which tool should you use?

• A. Insight Online
• B. InfoSight
• C. OS Event Viewer
• D. Integrated Management Log

Answer: A

NEW QUESTION 3
You are installing a rack at customer site.
How can you ensure redundant power to the rack?

• A. Install two power distribution units (PDUs) with each one connected to a power socket supplied by an independent electrical power source.
• B. Ensure 3-phase power is available in the data center.
• C. Connect an uninterruptible power supply (UPS) to redundant circuit breakers at the facility power source.
• D. Use two different power cords to connect the server to the power grid at the customer site.

Answer: C

NEW QUESTION 4
You are troubleshooting server issues and need to troubleshoot when online and offline. Which HPE tool should you use?

• A. Integrated Management Log
• B. Insight Diagnostics
• C. Insight Remote Support
• D. Active Health System

Answer: B

NEW QUESTION 5
A customer needs to provide inventory management, health monitoring, status alerting, and reporting for their ProLiant servers.
Which HPE management offering meets the customer’s needs?

• A. OneView
• B. Insight Remote Support
• C. InfoSight
• D. Insight Online

Answer: A

NEW QUESTION 6
You are installing new drives into the internal cage of a HPE ProLiant DL380 server. How is the drive device number set?

• A. The Smart Array controller assigns the device number automatically based on the bay
• B. HPE OneView uses the server profile to assign the device number
• C. The operating system assigns the device number automatically based on the drive installation order
• D. You must use Smart Storage Administrator to assign the device number

Answer: A

NEW QUESTION 7
Why is RAID 6 the best option for a large RAID set for archive storage on large-capacity drives?

• A. to reduce risk during volume rebuild
• B. to increase write performance on the volume
• C. to maximize capacity of the volume
• D. to reduce drive wear

Answer: A

NEW QUESTION 8
A customer needs to improve throughput performance of iSCSI traffic on their Layer 2 switch. Which feature should the customer implement at the switch level?

• A. Jumbo frames
• B. Oversubscription
• C. SMB Direct
• D. Remote Data Memory Access

Answer: A

NEW QUESTION 9
A customer requires a software-defined storage solution. Which storage solution meets the customer’s needs?

• A. HPE MSA
• B. HPE StoreVirtual VSA
• C. HPE 3PAR StoreServ
• D. HPE Nimble Storage

Answer: B

NEW QUESTION 10
A customer needs to implement VMware across a few racks of servers. They anticipate a large amount of VM creation and retirement.
What are key technologies in a Top of Rack (ToR) switch that support this environment? (Choose three.)

• A. Smart Rate Support
• B. Deep Packet Buffers
• C. VPN Support
• D. PoE support
• E. MLAG support
• F. Rapid Configuration Management

Answer: ABE

NEW QUESTION 11
A customer is planning an upgrade to their network infrastructure. They want to move to an open networking solution, and they want to install a network switch that supports their choice of network operating system.
Which HPE product family will meet the customer’s needs?

• A. Altoline
• B. FlexFabric
• C. Arista
• D. Aruba

Answer: A

NEW QUESTION 12
You plan to install an HPE ProLiant DL360 Gen10 in an environment with an ambient temperature of 45 °C (113 °F).
Which additional option is required?

• A. 500W Flex Slot Platinum PS Kit
• B. M.2 Solid State Enablement Kit
• C. Gen10 Bezel Kit
• D. High Performance Fan Kit

Answer: D

NEW QUESTION 13
A customer needs to centralize their backup environment for their branch office They plan to use HPE StoreOnce with catalyst
What should they implement within their backups software to minimize the network load on the remote site?

• A. source-side deduplication
• B. target-side deduplication
• C. thin provisioning
• D. native compression

Answer: A

NEW QUESTION 14
A customer needs to know if the storage solution you proposed contains components that are compatible with existing products currently in the data center.
Which HPE resource should you use to provide this information?

• A. Storage Size
• B. One Config Advance (OCA)
• C. One Config Simple (OCS)
• D. Single Point of Connectivity Knowledge (SPOCK)

Answer: D

NEW QUESTION 15
A customer is standardized on high-density, rack-mounted servers. They have an application that requires 3 six-drive RAID6 groups and redundant 10 Gb NICs.
What is the highest-density server that meets these customer requirements?

• A. DL580 Gen10
• B. DL360 Gen10
• C. DL380 Gen10
• D. BL460c Gen10

Answer: C

NEW QUESTION 16
A company plans to purchase new HPE servers. The company needs to maximize local storage capacity within the servers.
Which HPE servers should the company install?

• A. ProLiant BL460c Gen10
• B. ProLiant DL380 Gen10
• C. ProLiant ML110 Gen 9
• D. ProLiant DL360 Gen 9

Answer: B

NEW QUESTION 17
You are troubleshooting a POST error on a HPE ProLiant rack-mount server. HPE support has directed you to test a minimum hardware configuration.
Which components should you remove? (Choose two.)

• A. CMOS battery
• B. all cooling fans
• C. all expansion boards
• D. all external storage media
• E. redundant processors

Answer: DE

NEW QUESTION 18
You are installing an HPE StoreOnce backup system in a customer’s environment. They need a simple and cost-effective method to centralize and automate the backup of multiple servers (file, virtualization, database). They also need the ability to integrate with an existing third-party backup software.
How must you configure the StoreOnce system to meet the customer’s requirements?

• A. block device
• B. replication target
• C. NDMP target
• D. VTL device

Answer: D

NEW QUESTION 19
You are configuring a FlexFabric switch for a customer environment. The customer has requested specific SFP+ transceivers, power options, and cables.
Which HPE tool enables you to select and configure a switch according to precise specifications?

• A. Single Point of Connectivity Knowledge (SPOCK)
• B. Networking Online Configurator
• C. One Config Simple (OCS)
• D. Switch Selector

Answer: C

NEW QUESTION 20
A customer needs to purchase a redundant pair of SAN switches for their virtualization environment. The customer requires a total of eight 16 Gbps FC storage ports and eighteen 8 Gbps FC host attachments.
Which switch meets the customer’s needs at the lowest cost?

• A. HPE StoreFabric SN6010C 48-port Switch
• B. HPE StoreFabric SN6010C 12-port Switch with an On Demand Port Activation License
• C. HPE 8/24 SAN Switch 16-port Switch with an 8-port Upgrade License
• D. HPE 8/24 SAN Switch 16-port Switch

Answer: B

NEW QUESTION 21
You are working on a server, and you notice that the blue UID light on the server is flashing slowly. What does this indicate?

• A. The host server is in standby mode
• B. The system is being managed remotely
• C. The host has rebooted and is performing POST actions
• D. The system is experiencing power issues

Answer: B

NEW QUESTION 22
......