How Many Questions Of HPE0-S58 Exam Engine

NEW QUESTION 1
An HPE Synergy compute module has a template-based server profile with two identically configured connections, each containing five VLANs.
What is the most efficient method the integrator can use to add a new VLAN to each connection?

• A. Add the new VLAN to the network set configured in the profile template, and update the server profile from the template
• B. Add the new VLAN under Edit server profile connections
• C. Add the new VLAN to the network set configured in the profile template
• D. Add the new VLAN under Edit server profile connections in the profile template, and update the server profile from the template

Answer: A

NEW QUESTION 2
An integrator is installing three Synergy frames in different locations for a customer. As part of the installation, the customer requests a single monitoring dashboard that shows the current hardware status, warranty status, and open support cases of all three frames.
Which configuration steps must the integrator perform to provide the customer with this functionality?

• A. Enable Remote Support and Insight Online Integration in the Composer UI
• B. Install Insight Remote Support Advanced, and integrate it with HPE Global Dashboard
• C. Configure OneView with iLO Amplifier pack
• D. Activate iLO Federation on all installed compute nodes

Answer: C

NEW QUESTION 3
What must an integrator do before an existing cluster can be imported to the HPE Composer?

• A. The vCenter Server must be integrated with the HPE Composer
• B. The cluster must be vSAN enabled
• C. The HPE Composer must have at least two management interfaces to connect to the cluster
• D. The cluster must be enabled for HPE Composer integration

Answer: A

NEW QUESTION 4
A customer has a datacenter with 3-frame Master/Satellite Synergy solution. They plan to add two additional frames to the remote datacenter, but they want to have a single management tool.
How should the integrator set up the management of the datacenter?

• A. Add two frames from the remote datacenter as remote enclosures using existing Composer
• B. Install one Composer in every frame in both local and remote datacenter
• C. Deploy one Composer in each site and link them together
• D. Connect the management links with fibre cables if the distance between datacenters is more than 500m

Answer: A

NEW QUESTION 5
An integrator needs to validate whether the datastore created for ESXi systems based on 3PAR virtual volume can support all DRS cluster functionalities.
Click on the parameter that the integrator needs to verify.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 6
A customer needs to deploy additional management components, such as vCenter Server and HPE Global Dashboard.
According to HPE best practices, how should an integrator deploy these components?

• A. Deploy VMware HA cluster on two dedicated management servers, then deploy management components to this cluster.
• B. Deploy vCenter Server as a virtual machine on the Hyper-V host and HPE Global Dashboard to the domain controller.
• C. Install vCenter Server on the domain controller, then deploy HPE Global Dashboard to the HPE Composer or HPE OneView appliance.
• D. Deploy vCenter Server to any Windows machine, and install HPE Global Dashboard on the same server.

Answer: B

NEW QUESTION 7
Which storage solution can be used for volume provisioning using HPE Composer?

• A. MSA 2040
• B. HPE StoreEasy 1560
• C. HPE 3PAR StoreServ
• D. HPE XP7 Storage

Answer: C

Explanation:
References: https://www.karma-group.ru/upload/iblock/30b/hpe_synergy_composer.pdf

NEW QUESTION 8
During a first-time installation of HPE Synergy, an external monitor is not available to the integrator. Which approach should the integrator take to perform the first-time setup?

• A. Download MSTCS, connect the laptop to the front Panel Ethernet port, and open a RDP Session to 192.168.10.1 on port 443.
• B. Download VNC Viewer, connect the laptop to the front Panel Ethernet port, and open a VNC-connection to 192.168.10.1 on port 5900.
• C. Download Telnet, connect the laptop to the front Panel Ethernet port, and open a connection to 192.168.10.1 on port 8443.
• D. Download PuTTY, connect the laptop to the front Panel Ethernet port, and open an SSH connection to 192.168.10.1 on any port (default is 22).

Answer: B

NEW QUESTION 9
Which technology used in HPE SimpliVity allows a reduction in storage consumption?

• A. trunking
• B. hashing
• C. consolidation
• D. compression

Answer: D

NEW QUESTION 10
A customer using HPE Synergy is unable to access certain VLANs from a single NIC port of a compute module.
Which configuration option in the server profile needs to be verified to ensure that the server profile has the correct configuration?

• A. multiple Networks are assigned to the connection
• B. multiple VLAN checkbox is selected
• C. VxLAN has not been enabled
• D. assigned Network Set includes all needed VLANs

Answer: D

NEW QUESTION 11
Refer to the exhibit.

A customer has an HPE Synergy 2-frame configuration, as shown. The customer has a new project and needs to increase the number of compute modules.
What is the maximum number of compute nodes that the customer’s fabric could support?

• A. 24
• B. 36
• C. 48
• D. 60

Answer: D

NEW QUESTION 12
What is the purpose of the OmniStack Accelerator card installed in HPE SimpliVity platform?

• A. It performs inline data efficiency processing and deduplication
• B. It provides very fast SSD capacity for demanding workloads
• C. It provides graphic acceleration for VDI infrastructure
• D. It accelerates CPU processing within a virtual machine

Answer: B

Explanation:
References:
https://assets.ext.hpe.com/is/content/hpedam/documents/a00026000-6999/a00026728/a00026728enw.pdf

NEW QUESTION 13
A customer wants to expand their existing cluster using the Grow Cluster functionality from OneView for vCenter Server.
Which OS build plan managed by HPE OneView for vCenter Server can the customer use?

• A. ICsp-Based Deployment
• B. iLO Federation-Based Deployment
• C. Image Streamer-Based Deployment
• D. PXE-Based Deployment

Answer: A

Explanation:
References:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00036306en_us&docLocale=en_US

NEW QUESTION 14
A customer needs to attach 20 HPE 1 TB SATA 6G SFF hard drives to an HPE Synergy 480 Gen10 compute module.
Which HPE products are necessary to meet the requirements? (Choose three.)

• A. HPE D3940 storage module
• B. HPE Synergy 12Gb SAS Connection Module
• C. HPE 10GbE SynergyPass-Thru Module
• D. HPE Smart Array P416ie-m Controller
• E. HPE Smart Array P542D Controller

Answer: BDE

NEW QUESTION 15
Refer to the exhibit.

An integrator needs to add an FCoE connection to the server profile, but the FCoE connection type is not available.
What is the likely cause of this issue?

• A. FCoE capable interconnect modules are not installed in the Synergy frame
• B. Defined FCoE network is not associated with a SAN or does not have VLAN Id defined
• C. A FCoE connection is not available, as there is no LIG configured for FCoE connectivity
• D. The FCoE connection has not been added as a Fibre Channel connection within a server profile

Answer: D

NEW QUESTION 16
Which management tool required by HPE Infosight must be deployed at the customer site?

• A. HPE Global Dashboard
• B. HPE OneView
• C. HPE iLO Amplifier
• D. HPE StoreServ Management Console (SSMC)

Answer: C

NEW QUESTION 17
How can an integrator use an HPE Synergy D3940 storage module to provision shared storage to compute modules without requiring a separate SAN to be connected to the frame?

• A. Configure drives as DAS storage, and use Image Streamer to present the disks as iSCSI targets to the whole frame.
• B. Configure drives as SAN storage, and configure a Smart Array P416ie-m Controller into HBA mode.Add the SAN disk to the server profile.
• C. Configure drives as DAS storage, and use StoreVirtual VSA to present the disks as iSCSI storage to the whole frame.
• D. Configure drives as SAN storage, and configure a P240nr array controller into HBA mod
• E. Add the SAN disk to the server profile.

Answer: C

Explanation:
References: https://www.iistech.com/blog/composable-infrastructure-with-hpe-synergy-part-2

NEW QUESTION 18
Refer to the exhibit.

A customer with the design shown needs to perform an in-place upgrade to its environment to scale the two-frame single homed Multimodule Link Aggregation Group (MLAG) configuration to a three-frame
configuration. The new frame needs to provide a redundant 20Gb connection for the compute module ports in Fabric 3.
Which interconnect modules should the integrator use in Frame 3?

• A. HPE Virtual Connect SE 40Gb F8 module in bay 3 and HPE Virtual Connect SE 40Gb F8 Module in bay 6
• B. HPE Synergy 10Gb Interconnect Link Module in bay 3 and HPE Synergy 10Gb Interconnect Link Module in bay 6
• C. HPE Synergy 20Gb Interconnect Link Module in bay 3 and HPE Synergy 20Gb Interconnect Link Module in bay 6
• D. HPE Synergy 20Gb Interconnect Link Module in bay 3 and HPE Synergy 10Gb Interconnect Link Module in bay 6

Answer: B

NEW QUESTION 19
Which tool should an integrator use to determine the power requirements of an HPE Synergy solution?

• A. HPE Product Bulletin
• B. HPE SalesBuilder for Windows
• C. HPE Synergy Planning Tool
• D. HPE SPOCK

Answer: C

NEW QUESTION 20
A customer has the following configuration: Frame 1
Bay 1 – HPE Synergy 12Gb SAS Connection Module
Bay 2
Bay 3 – HPE Virtual Connect SE 40 GB F8 Module
Bay 4 – HPE Synergy 12GB SAS Connection Module
Bay 5
Bay 6 – HPE Synergy 10 Gb Interconnect Link Module
Frame 2
Bay 1 – HPE Synergy 12Gb SAS Connection Module
Bay 2
Bay 3 – HPE Synergy 10Gb Interconnect Link Module
Bay 4 – HPE Synergy 12Gb SAS Connection Module
Bay 5
Bay 6 – HPE Virtual Connect SE 40Gb F8 Module
How many more frames can the customer add to their Synergy composable fabric? (Note: Enter your answer in the answer field below.)

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Frame 1 – Bay 2 – HPE Virtual Connect SE 100Gb F32 Module for Synergy (867796-B21)
Frame 1 – Bay 5 – HPE Virtual Connect SE 16Gb Fibre Channel Module for Synergy (779227-B21)
Frame 2 - Bay 2 – Brocade 16Gb/24 Power Pack+ Fibre Channel SAN Switch Module for HPE Synergy (K2Q86A)
Frame 2 – Bay 5 – HPE Synergy 4820C 10/20/25Gb Converged Network Adapter (876449-B21)

NEW QUESTION 21
An integrator is creating a server profile template for a VMware Cluster in a Synergy environment. The network administrator has given the server team two 40Gb uplinks with all 200 VLANs presented.
Click the appropriate network type that the integrator should select.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 22
A customer requires all automated Fibre Channel zones to have a prefix of “SYNERGY” in the automatically-generated zones.
Click where the integrator should change the naming policy.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 23
A Synergy integrator is unable to assign an HPE 3PAR Virtual Volume to a new server profile in HPE Composer. The Virtual Volume has been previously assigned to another profile.
Which setting in HPE Composer is preventing the integrator from assigning the volume to the new profile?

• A. private, in the volume properties
• B. shared, in the volume properties
• C. private, in the storage pool properties
• D. shared, in the storage pool properties

Answer: D

NEW QUESTION 24
Match each HPE server platform with optimal workload.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 25
......