The Secret Of HP HPE0-S60 Actual Exam

NEW QUESTION 1
You are troubleshooting an HPE OneView server profile that presents a critical state. The server profile was configured with a Link Aggregation Group
What should you check to fix the issue?

• A. if both FiexNICs are configured with the same speed
• B. If the logical enclosure is built on at least three HPE Synergy frames
• C. if both FiexNICs are connected to different networks
• D. if the logical enclosure is configured with redundant master modules

Answer: A

NEW QUESTION 2
Which statement about HPE Apollo 2000 Gen10 Plus platform is true?

• A. It is equipped with HPE Persistent memory by default
• B. It can support a single processor only and up to 4 per chassis
• C. It is fully managed using HPE OneView including all connections
• D. It offers servers with AMD EPYC and Intel Xeon Scalable CPUs

Answer: B

NEW QUESTION 3
Which statement about a new HPE SimpliVity deployment is true?

• A. New HPE SimpliVity deployments gives customer flexible choice of hypervisor
• B. A new HPE SimpliVity node can be a member of multiple dusters
• C. AM new HPE SimpliVity models are software optimized
• D. All new HPE SimpliVity models are based on mid CPUs

Answer: C

NEW QUESTION 4
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 5
Your customer is trying to grow a VMware duster using HPE OneView for VMware vCenter Server. They get an error and cannot proceed
Which tool should you use to troubleshoot the problem?

• A. HPE One View for VMware vCenter Server to verify if server profile template s property imported and registered
• B. vCenter Server to verify if an OS Bund Plans property defined and has ESXi image uploaded
• C. HPE OneView interface to import an existing cluster using the hypervisor cluster profile functionality.
• D. ILO interlace of a given HPE Synergy compute node to verify whether this node is registered within HPE Oneview.

Answer: A

NEW QUESTION 6
Refer to the exhibit.

Which statement about this logical interconnect group is true?

• A. Both modules are located in different frames for redundancy
• B. For an uplink set, ports from different modules can be selected
• C. interconnect modules are installed in interconnect bays 1 and 4
• D. An additional license is required to change the enclosure count

Answer: D

NEW QUESTION 7
In the past a customer experienced a networking issue where network ports went down and came back up in quick succession.
Which HPE Virtual Connect SE 100 GD F32 Module for HPE Synergy feature can be configured to disable such ports?

• A. Pause flood protection
• B. sFlow
• C. Storm control
• D. Port flap protection

Answer: B

NEW QUESTION 8
Your customer has the following HPE Synergy setup
- 3 HPE Synergy 12000 Frames
- 4 HPE Virtual Connect SE 100 Gb F32 Modules
- 2 HPE Synergy 50 GO Interconnect Link Modules
- 36 HPE Synergy 480 Gen10 Plus compute modules
- 2 HPE Composer 2 modules
Which statement about this setup is true?

• A. To use all compute nodes, the customer must create at least two logical enclosures
• B. To manage all frames, the customer must buy two additional HPE Composer 2 modules
• C. The customer must buy 36 HPE OneView Advanced licenses to manage compute modules
• D. The customer can add one D3940 storage Module to each of the frames

Answer: C

NEW QUESTION 9
Your customer has a logical enclosure configured using a angle HPE Synergy frame with the following configuration
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- two HPE Synergy Virtual Connect SE 32Gb FC Modules -12 HPE Synergy 480 Gen10 Plus compute nodes with appropriate mezzanine cards
They plan to add a new HPE Synergy frame to an existing logical enclosure with the following configuration
- two HPE Synergy Virtual Connect SE 32Gb FC Modules
- two HPE Synergy 20Gb interconnect Link Modules
- Eight HPE Synergy 480 Gen 10 Plus compute nodes with appropriate mezzanine cards Which statement about the planned configuration change is true?

• A. Four compute modules must be moved to the second frame to balance the configuration
• B. The two HPE Synergy 20Gb interconnect Link Modules must be replace with the 50Gb option
• C. A license for an extended logical enclosure must be added to HPE OneView through GUI
• D. The HPE Synergy virtual Connect SE 32Gb FC Modules from both frames should be stacked

Answer: D

NEW QUESTION 10
As a result of the troubleshooting process, you recommend replacing, HPE Synergy Composer modules which HPE Synergy Composer 2
Why would you recommend this change?

• A. HPE Composer 1 running HPE OneView 5 2 or later can support only 12 frames within a single management nog
• B. HPE Composer 2 can support more than the maximum 21 frames that are supported with HPE Composer 1 and HPE OneView.
• C. HPE Composer 2 provides access to 105 interface that can be used for full management of HPE Composer 2 remotely
• D. HPE Composer 1 cannot support remote frames, which doubles the configuration and management procedures effort

Answer: B

NEW QUESTION 11
Your customer reports that they cannot deploy HPE Synergy compute nodes using HPE OneView for VMware vCenter Server (HPE OV4VC).
What should you check during troubleshooting process?

• A. If HPE OneView credentials are added in vCenter Server
• B. If an compute nodes are added to the vCenter Server
• C. If the HPE Oneview instance Is integrated with HPE OV4VC.
• D. If vCenter Server is licensed in the HPE Oneview interface

Answer: B

NEW QUESTION 12
Your customer reports mat an external FC boot volume for Windows server is visible four times in the Disk Management 1 online and 3 offline.
What should you do to resolve this issue?

• A. Disable deduplication for this volume at the array level
• B. Remove the offline disks using array management tools
• C. Install and configure MPIO on me Windows system
• D. Remove the offline disks using Windows Disk Management

Answer: C

NEW QUESTION 13
Your customer plans to deploy VMware vSAN using D3940 Storage Modules. Which statement about this solution is true?

• A. The 12Gb SAS modules required for D3940 connectivity can only be installed in the first fabric.
• B. To use the storage controller that will access D3940 storage modules, a second CPU must be installed.
• C. For VMware vSAN deployment, all drives in the D3940 storage modules must be SSD drives.
• D. All drives in the D3940 storage modules must formulate a single logical drive with RAID5 configured

Answer: A

NEW QUESTION 14
Which statement about HPE Superdome nPars is true?

• A. Chassis in the same nPar can have different CPU configuration
• B. Rack Management Controller is required Tor nPar configuration
• C. Chassis in the same nPar can have different memory configuration
• D. nPars are supported only with 3rd Generation Intel Xeon Scalable Processors

Answer: C

NEW QUESTION 15
Your customer plans to deploy VMware ESXi 7 0 U2 and they are looking for a hardware platform mat wilt allow them to use up to 24 TB of physical memory.
Which HPE compute system meets this customer's requirements?

• A. HPE ProLiant DL380 Gen 10 Plus
• B. HPE Synergy 480 Gen10 Plus
• C. HPE ProLiant DL560 Gen10
• D. HPE Superdome Flex 280

Answer: A

NEW QUESTION 16
Which statement about the SY480 Gen10 Plus Compute Module is true?

• A. It cannot be mixed with Gen9 compute modules in the same frame.
• B. It supports 8 memory channels and memory DIMMs of up to 256GB.
• C. It only supports NVDIMM Persistent Memory.
• D. It supports "3rd Gen AMO EPYC Server Processors with 64 cores.

Answer: C

NEW QUESTION 17
Your customer plans to deploy VMware ESXi 7. 0 U2, and they are looking for a hardware platform that will allow them to use up to 16 CPU sockets
Which HPE compute system meets the customer requirements?

• A. HPE ProLiant DL580 Gen10
• B. HPE ProLiant OL380 Gen 10 Plus
• C. HPE Synergy 480 Gen10 Plus
• D. HPE Superdome Flex system

Answer: C

NEW QUESTION 18
Your customer used to manage their HPE 3PAR arrays using HPE OneView Now they have replaced these arrays HPE Primera.
How does managing the new arrays compare to managing their old arrays?

• A. HPE OneView offers additional functionalities for HPE Primera like CPG management
• B. HPE OneView offers limited support tor HPE Primera because of the firmware differences
• C. To manage HPE Primera using HPE OneVie
• D. a dedicated license is required
• E. Management procedures and features are the same tor both types of the array

Answer: C

NEW QUESTION 19
......