All About Simulation HPE0-V14 Testing Material

NEW QUESTION 1

When installing servers in a rack, a customer has left gaps between the servers.
What should you tell this customer regarding the space between servers? (Select two.)

• A. It should be filled with blanking panels.
• B. It does not provide correct rack airflow.
• C. It provides easy access for servicing components.
• D. It allows for easier cable management.
• E. It allows for side-to-side component cooling.

Answer: AB

NEW QUESTION 2

A customer is considering an HPE ProLiant DL380 Gen10 server for their data center. The customer runs a large Oracle database. They need to increase performance and reduce their licensing costs.
Which feature of HPE Gen10 servers offers these benefits?

• A. workload profile matching
• B. agentless management
• C. jitter smoothing
• D. core boosting

Answer: D

NEW QUESTION 3

You are managing a HPE ProLinat rack-mount server and need to determine when the Remote Console was most recently used.
Where can you find this information?

• A. System
• B. IML
• C. iLO
• D. Audit

Answer: C

NEW QUESTION 4

A customer is planning to deploy a new Top of Rack solution. They plan to use a stacking technology that meets the following requirements:
Support for Multi Chassis Link Aggregation in an active-active mode. The control plane must not be a single point of failure.
Rapid Fail-over. Unified Management.
They require a maximum of two switches per stack.
Which stacking technology meets the customer’s requirements?

• A. HPE Intelligent Resilient Framework (IRF)
• B. HPE Distributed Trunking
• C. Aruba Virtual Switching Extension (VSX)
• D. Aruba Virtual Switching Framework (VSF)

Answer: C

NEW QUESTION 5

What is a feature of the MSA 1050 that will help your Storage Customer better utilize storage resources?

• A. block, file, and object access
• B. Triple+ parity RAID
• C. Automated Tiering
• D. 99.9999% guaranteed availability

Answer: C

NEW QUESTION 6

A customer has a VMware environment with HPE ProLiant servers and Nimble storage. They have been using a Windows VM to provide file services for their employees.
The customer is experiencing performance issues with the solution due to memory constraints on the virtual environment.
What could be added to the existing environment that will provide dedicated file services with better performance that would still utilize the existing storage and backup solutions?

• A. HPE StoreEver 30750
• B. HPE Storage Performance File Controller
• C. HPE StoreEasy 1460 Storage
• D. HPE StoreEasy 1650 Expanded Storage

Answer: C

NEW QUESTION 7

You are installing a HPE MSA storage system and need to connect the power cooling module (PCM). What should you do to ensure power redundancy?

• A. Ensure that a physical service processor is properly connected to each PCM
• B. Verify that each cooling fan is cabled to a separate controller
• C. Connect each PCM within a shelf to a different power distribution unit (PDU)
• D. Connect redundant power cords from the PCM controller to independent power supplies

Answer: C

NEW QUESTION 8

A customer needs to reconfigure their data center network because their network often becomes congested, and the customer cannot monitor the network.
How should the customer configure their network?

• A. Isolate the management network from production traffic
• B. Isolate the SAN on a public network and use a virtual private network (VPN) for secure data
• C. Configure IRF on the switches
• D. Configure in-band management to manage the switches through gigabit Ethernet ports

Answer: A

NEW QUESTION 9

Drag the correct protocols from the left to their appropriate area on the topology.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 10

A customer has a new virtual environment. They selected HPE servers for the environment in order to achieve better performance for their applications.
Which HPE feature enables the customer to achieve this server performance improvement?

• A. embedded application
• B. workload performance advisor
• C. workload profile
• D. Active Health System

Answer: B

NEW QUESTION 11

You are designing a solution to run a Citrix XenDesktop workload.
Which HPE planning and designing resource contains a detailed example of this type of solution, including a list of all the hardware and software components?

• A. Sales Builder for Windows
• B. Product Bulletin
• C. Smart Selling Tool
• D. Reference Architecture

Answer: D

NEW QUESTION 12

You are troubleshooting a customer’s HPE ProLiant rack-mount server. The customer has configured the server in Legacy Boot BIOS Mode and is trying to boot from a USB 3.0 drive. The server will not boot from the drive.
What should you do?

• A. Set the USB 3.0 mode to Enabled.
• B. Set the USB 3.0 mode to Auto.
• C. Use the internal USB 3.0 connector.
• D. Use the front-facing USB 3.0 connector.

Answer: A

NEW QUESTION 13

A customer needs a virtual desktop infrastructure environment to quickly deploy new desktop images to more than 70 onsite contractors. They plan to use HPE ProLiant DL360 Gen10 servers running VMware ESXi connected to a shared storage device. The customer requires deduplication because they are concerned about the required storage capacity for the full clone images.
Which storage device would best address their concerns?

• A. HPE MSA 1040
• B. HPE MSA 2052
• C. HPE Nimble AF20
• D. HPE Nimble HF20C

Answer: D

NEW QUESTION 14

A customer needs to virtualize their storage across physical servers and storage environments. Which HPE solution meets the customer’s needs?

• A. Nimble CS3000
• B. StoreVirtual 4335
• C. StoreVirtual VSA
• D. MSA 2050

Answer: C

NEW QUESTION 15

When is it appropriate for a customer to implement HPE OneView Standard?

• A. To manage multiple servers
• B. To monitor their services
• C. To enable the Advanced iLO license
• D. To update firmware

Answer: B

NEW QUESTION 16

You are onsite at a customer location to install a new network switch. The customer wants users to be able to manage the switch through the IP network.
How should you connect the switch to the network?

• A. Configure multiple user IDs or roles for the console connection
• B. Configure the management IP address on the switch and enable Telnet or SSH access
• C. Use a dedicated console cable to create a dedicated management network for every user
• D. Connect the switch to the network by using the serial cable that ships with the switch

Answer: B

NEW QUESTION 17

A customer has the following requirements: two or more 10Gb SFP+ uplinks
downlink ports capable of 1Gb or 10Gb operation over CAT6a or CAT7 cables
24 downlink ports Which HPE tool would you use to help choose an HPE network solution that meets the customer requirements?

• A. HPE Switch Selector
• B. HPE NinjaSTARS
• C. HPE SAF
• D. HPE SPOCK

Answer: D

NEW QUESTION 18

A Network administrator connects two switches together with multiple links of the same speed, duplex, and media type. The administrator expected the links to be aggregated, but they are not. The administrator confirmed that the ports are part of the appropriate link aggregation groups and that the permitted VLANs match.
Switch A has the lower LACP System Priority.
Which LACP operation states describe the failure above?

• A. Switch A: Active; Switch B: Active
• B. Switch A: Active; Switch B: Passive
• C. Switch A: Passive; Switch B: Passive
• D. Switch A: Passive; Switch B: Active

Answer: C

NEW QUESTION 19

Which two HPE applications are installed on Windows operating systems with intelligent Provisioning? (Choose two.)

• A. Lights-Out Online Configuration Utility
• B. OneView
• C. UEFI Control Suite
• D. Intelligent Management Center
• E. Smart Storage Administrator

Answer: AE

NEW QUESTION 20

An HPE customer wants to perform is simplified update of firmware and drivers among their 100 HPE Gen9 and Gen10 racked servers.
Which HPE software tool should the customer use to minimize the time required to perform this activity.

• A. HPE Smart Update Manager
• B. HPE OneView Standard
• C. HPE ProLiant Support Pack
• D. HPE iLO Amplifier Pack

Answer: A

NEW QUESTION 21

A customer environment is being managed and monitored with HPE OneView. A review of the OneView log shows that there have been several trap storm events.
Which series of events must take place for OneView to insert a Trap Storm event entry into the log of system events?

• A. SNMP traps from three or more identical hosts have been logged within the past 256 seconds.
• B. Four or more identical SNMP traps have been logged within the past 30 seconds.
• C. Three or more SNMP trap messages have been logged with increasingly critical variable string values.
• D. Four or more ports on the same network switch have reported sequential SNMP trap messages

Answer: C

NEW QUESTION 22

You are installing new drives into the internal cage of a HPE ProLiant DL380 server. How is the drive device number set?

• A. The Smart Array controller assigns the device number automatically based on the bay
• B. HPE OneView uses the server profile to assign the device number
• C. The operating system assigns the device number automatically based on the drive installation order
• D. You must use Smart Storage Administrator to assign the device number

Answer: A

NEW QUESTION 23
......