The Latest Guide To JN0-104 Exam Topics

NEW QUESTION 1


What does the number inside the square bracket represent?

• A. Metric
• B. Local preference
• C. Protocol reference number
• D. Route preference

Answer: D

Explanation:
https://www.juniper.net/documentation/us/en/software/junos/bgp/topics/ref/command/show-route.html#show-ro Module 9 of Juniper Open Learning, Routing Fundamentals describes the [Source/Route Preference]. The metric is 'how' a protocol calculates the best path to a destination. RIP = Hops, OSPF = Cost. Metrics are unique to protocols.
user@host> show route
inet.0: 11 destinations, 12 routes (11 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both 1:65500:1:10.0.0.20/240
*[MVPN/70] 19:53:41, metric2 1
Indirect
1:65500:1:10.0.0.40/240
*[BGP/170] 19:53:29, localpref 100, from 10.0.0.30 AS path: I
> to 10.0.24.4 via lt-0/3/0.24, label-switched-path toD [BGP/170] 19:53:26, localpref 100, from 10.0.0.33 AS path: I
> to 10.0.24.4 via lt-0/3/0.24, label-switched-path toD inside square brackets -> route preference
metric and localpref are optional and after the date

NEW QUESTION 2


Referring to the exhibit, what will be the result?

• A. The device will boot in single-user mode at the operational prompt.
• B. The device will boot into single-user mode at the shell prompt.
• C. The device will boot into multi-user mode at the shell prompt.
• D. The device will boot in multi-user mode at the configuration prompt.

Answer: C

NEW QUESTION 3

Exhibit:

Referring to the exhibit, which statement is true?

• A. Traps are allowed from 10.21.15.180
• B. Traps are sent to 10.21.15.180
• C. Traps are sent to 10.21.15.16
• D. Traps are allowed from 10.21.15.16

Answer: D

NEW QUESTION 4

What does the "3" in Junos version 14.2R3.2 represent?

• A. a single-threaded version of the Junos OS.
• B. a major release number.
• C. a minor release number.
• D. a service build number.

Answer: C

NEW QUESTION 5

You just received a new factory-default Junos device.
Which two steps must be completed to connect and log in to the device? (Choose two.)

• A. Connect to the device using an SSH connection.
• B. Log in with the user root and no password.
• C. Connect to the device using the console connection.
• D. Log in with the user root and password of root123.

Answer: BC

NEW QUESTION 6

Click the Exhibit button

Referring to the exhibit, what will be the source address for packets egressing et-0/0/34.07

• A. 10.20.0.1
• B. 10.30.0.1
• C. 10.10.0.1
• D. 10.40.0.1

Answer: A

NEW QUESTION 7

What would you use as a network tool to open a secure terminal connection from a device running Junos OS to another device?

• A. SSH
• B. HTTPS
• C. RDP
• D. telnet

Answer: A

NEW QUESTION 8

What are three benefits of using a dynamic routing protocol? (Choose three.)

• A. increased network security
• B. decreased network latency
• C. increased network availability
• D. greater network scalability
• E. lower administrative overhead

Answer: CDE

NEW QUESTION 9

Which three statements describe OSPF? (Choose three)

• A. OSPF must operate between different autonomous system
• B. OSPF calculates the best path to each destination
• C. OSPF is a link-state IGP
• D. OSPF uses areas to incorporate hierarchy and to allow for scalability
• E. OSPF uses a distance-vector algorithm to calculate routing cost

Answer: BCD

NEW QUESTION 10

Click the Exhibit button.

Which statement is correct regarding the configurration shown in the exhibit?

• A. When the ospf-trace file has created five files, it will stop logging additional information.
• B. When the ospf-trace file reaches the 64 KB file size, it is renamed and begins a new file.
• C. The ospf-trace file will automatically replace any existing trace file with the same name.
• D. Timestamp information will not be included for each line of ospf-trace

Answer: B

NEW QUESTION 11

Which parameter would you use to prohibit the redistribution of a static route used for management traffic?

• A. no-readvertise
• B. discard
• C. reject
• D. passive

Answer: A

NEW QUESTION 12

Exhibit.

You have the policy configuration shown in the exhibit applied to your BGP peering. You find that your customer routes coming from the 10.1.1.0/24 network are being rejected.
Which command should be used to correct the problem?

• A. [edit policy-options policy-statement my-policy] user@router# insert term 1 before term 2
• B. [edit policy-options policy-statement my-policy] user@router# insert term 2 before term 1
• C. [edit policy-options policy-statement my-policy] user@router# copy term 2 to term 0
• D. [edit policy-options policy-statement my-policy]

Answer: B

NEW QUESTION 13

You have enabled trace options to log error messages. You want to have the messages displayed to your terminal session automatically as they occur.
Which command should you use in this scenario?

• A. request message terminal
• B. file show
• C. file list
• D. monitor start

Answer: D

NEW QUESTION 14

Which component is responsible for performing protocol updates and system management?

• A. forwarding tables
• B. Routing Engine
• C. bridging table
• D. Packet Forwarding Engine

Answer: B

NEW QUESTION 15

Click the Exhibit button.

Which operational mode command in Junos OS produces the output shown in the exhibit?

• A. show system users
• B. show system connections
• C. show system commit
• D. show system reboot

Answer: C

NEW QUESTION 16

In your configuration, an interface contains multiple IP addresses belonging to the same subnet. You want to identify the IP address to use for packets sent to hosts on the same subnet. Which parameter would you use to accomplish this task?

• A. relative
• B. preferred
• C. primary
• D. patch

Answer: B

NEW QUESTION 17
......