Precise Network-Appliance NS0-592 Braindumps Online

NEW QUESTION 1
Click the exhibit button.

You execute a few commands and many fail, as shown in the exhibit. What could cause the error?

• A. The mgwd user space process on cluster1-02 failed.
• B. The aggregates were manually brought offline.
• C. The cluster-02 node is down.
• D. The bcomd user space process on cluster1-02 failed.

Answer: C

NEW QUESTION 2
Click the exhibit button.

A customer notifies you that Active IQ is showing a warning that a broadcast domain in their environment has been configured with ports from multiple VLANs.
Referring to the exhibit, which two statements are correct? (Choose two.)

• A. You should move the e0M ports to a Broadcast Domain that is dedicated to only management traffic.
• B. A VLAN tag cannot be assigned to the e0M port, so the configuration is acceptable.
• C. You should configure e0M so that is tagged on VLAN 40.
• D. You should change the LIF service policy to net-intercluster to prevent the LIFs from failing over to the e0M ports.

Answer: CD

NEW QUESTION 3
Click the exhibit button.


Many end users are complaining that logging in their systems takes a long time. When the login to the desktop finishes, everything is fine. The home directories are on NetApp storage. You do not see any significant disk or CPU contention on the controller, so you gather output statistics from the controller and focus on SMB.
Referring to the exhibit, which two actions would help diagnose the problem? (Choose two.)

• A. Engage your Windows team to make sure that the domain controllers are not overloaded.
• B. Engage your desktop team to collect network traces from the clients.
• C. Collect more statistics to determine whether the controller itself is causing latency.
• D. Engage your network team to make sure that there are no issues between the storage controller and the domain controller.

Answer: CD

NEW QUESTION 4
Click the exhibit button.

Your customer is calling about their MetroCluster environment. They have provided you with the output of the metrocluster interconnect adapter show command.
Referring to the exhibit, which statement is correct?

• A. For all MetroCluster configurations, this is expected output.
• B. The InfiniBand cables should be connected in this configuration.
• C. The InfiniBand interconnect is not used in MetroCluster.
• D. This is a 2-node MetroCluster.

Answer: A

NEW QUESTION 5
A customer has a 2-node MetroCluster. They experienced a complete power loss at site B. The customer has lost connectivity to site B and now realizes that the DR partner at site A has not taken over the DR partner at site B.
Which two actions must be performed in this scenario? (Choose two.)

• A. On the DR partner at site A, perform the process to switchover.
• B. Ensure that site B is prevented from serving data or simply powered off (nodes and disk shelves).
• C. On the DR partner at site A, perform the process to heal the data aggregates.
• D. On the DR partner at site B, perform the process to heal the root aggregate.

Answer: AD

NEW QUESTION 6
The root aggregate on your single-node ONTAP cluster failed. You have the configuration backups saved on your FTP server?
In this scenario, which two steps are part of the recovery procedure? (Choose two.)

• A. Perform a Netboot using the configuration backup.
• B. Create a new aggregate and set its ha_policy option to sfo.
• C. Boot into maintenance mode.
• D. Create a new root aggregate and set its ha_policy option to cfo.

Answer: CD

NEW QUESTION 7
Which two statements are true about a data volume? (Choose two.)

• A. A data volume can be accessed by a LIF on any node.
• B. A data volume can be moved to any aggregate with space for it in the cluster.
• C. A data volume can be accessed by a user connected to any SVM.
• D. An SVM root or root load sharing mirror volume must be present on every node.

Answer: AB

NEW QUESTION 8
At a customer site, the storage failover giveback command fails when giving back the root aggregate. What would be two reasons for this failure? (Choose two.)

• A. There are active NFS connections.
• B. There are failed disks.
• C. The HA interconnect is not operational.
• D. There are active SIS operations running.

Answer: BC

NEW QUESTION 9
Click the exhibit button.

You are investigating an AutoSupport Disk Redundancy Failed alert. Cluster A lost connectivity to storage bridge BrB1, while cluster B lost connectivity to storage bridge BrA1.
Referring to the exhibit, which three components need investigation? (Choose three.)

• A. storage bridges BrB1
• B. FC switch SwA1
• C. FC switch SwB1
• D. FC switch SwA2
• E. ISL cables

Answer: BCE

NEW QUESTION 10
A non-maskable interrupt event occurs. The system panics and then reboots. In this scenario, what would have caused the panic?

• A. a secd process
• B. a watchdog timer
• C. an ICMP blackhole detector
• D. a volume location distributed database

Answer: B

NEW QUESTION 11
End users are complaining of high latency when accessing an ONTAP 9 luster.
Which command helps you to determine whether there is a storage component that is contributing to this problem?

• A. qos statistics performance show
• B. qos statistics latency show
• C. sysstat -c 30 -M 1
• D. wafltop show -v -cpu -I 10 -c 5-n 6

Answer: A

NEW QUESTION 12
Two weeks ago, your customer experienced a data outage, which caused their MCC to switch over. When the power was restored, they found that 14 disks over three RAID groups had failed, which caused two data aggregates to lose their mirror plexes.
In this situation, before you perform a switchback, which three actions should be taken? (Choose three.)

• A. Delete the failed plexes.
• B. Initiate the aggregate healing phases.
• C. Adjust bridge configuration for the replaced disks.
• D. Mirror the unmirrored aggregates
• E. Assign all disks on the remote site to the surviving nodes.

Answer: BCD

NEW QUESTION 13
Click the exhibit button.

A customer has an FC SAN with brocade switches. Each server attached to the SAN gas four FC ports. The customer describes that one of their servers has only four paths to the LUNs configured on the cluster. There should be eight paths on all the other servers. The switch administrator has verified the zone configuration.
Referring to the exhibit, which two actions would you perform to troubleshoot the problem? (Choose two.)

• A. Review the LIF configuration on the cluster.
• B. Review the driver version on the server.
• C. Review that the host side FC link ports are enabled.
• D. Review the igroup configuration on the cluster.

Answer: AB

NEW QUESTION 14
Your customer has initiated several volume move commands to redistribute the workload in their 8-node cluster. To verify that this process is not affecting their client access, they were monitoring the network switches that provide client access, but they do not see the network load of the volume move command.
In this scenario, what is the reason for the behavior?

• A. The volume move command uses the HA iWarp interconnect, not the client access switches.
• B. The volume move command uses copy offload protocol, so it does not show up when monitored.
• C. The volume move command uses the intercluster LIFs, not the data LIFs.
• D. The volume move command uses the cluster interconnect switches, not the client access switches.

Answer: B

NEW QUESTION 15
A customer mentions that their intercluster SnapMirror replication operations consistently take much longer than normal. While troubleshooting, you want to initiate a test SnapMirror session to collect performance data.
How would you accomplish this task?

• A. Run the network test-path command to simulate a SnapMirror connection and record the latency/throughput data.
• B. View the active network connections to the node to see if there a large number of active connections.
• C. Use the ifstat command to collect network performance data for the physical interface.
• D. Run the network statistics lif show command for the intercluster LIF to simulate a network connection.

Answer: A

NEW QUESTION 16
Click the exhibit button.

A customer’s system reported several errors. There was no disruption, but the customer is concerned about the system’s health.
Referring to the exhibit, which statement is true?

• A. One of the switches has failed.
• B. One of the IOM modules on shelf 20 has failed.
• C. Storage redundancy is degraded.
• D. Port 1D on the system has failed.

Answer: C

NEW QUESTION 17
Click the exhibit button.


Referring to the exhibit, which change is required to enable the CIFS Autolocation function for the Users share?

• A. Edit the CIFS share’s properties to remove the changenotify property.
• B. Re-create the LIFs to allow both CIFS and NFS protocols.
• C. Change the CIFS share’s Symlink Properties parameter to symlinks.
• D. Modify the CIFS server’s option to enable SMB multichannel.

Answer: C

NEW QUESTION 18
A customer reports that OnCommand Performance Manager shows that the workload on node-02 in a 4-node cluster has increased to a level that is higher than the threshold. The customer wants to avoid this issue becoming a performance problem.
Which two actions would result in achieving this goal? (Choose two.)

• A. Use the volume move command to move one or more volumes to another aggregate that is owned by another node that is less utilized.
• B. Use the storage aggregate relocation command to offload an aggregate to its partner.
• C. Use the storage aggregate scrub command to verify the parity on the busy aggregates.
• D. Physically move the shelf to another node that is less utilized.

Answer: AD

NEW QUESTION 19
A field support engineer has just replaced the IOXM on NODE2 on a FAS8080 running ONTAP 9.1. After the replacement, the customer is unable to perform a giveback because the interconnect is down.
In this scenario, which statement is correct?

• A. Verify that there cross-links between the interconnects.
• B. Verify that the installed FC-VI cards are configured properly.
• C. Verify that the interconnect cables on the motherboard are connected correctly.
• D. Verify that the interconnect cables on the IOXM are connected correctly.

Answer: D

NEW QUESTION 20
......