Our pass rate is high to 98.9% and the similarity percentage between our 010-151 study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Cisco 010-151 exam in just one try? I am currently studying for the Cisco 010-151 exam. Latest Cisco 010-151 Test exam practice questions and answers, Try Cisco 010-151 Brain Dumps First.
2026 New 010-151 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/010-151/
Q1. Up to what speed can Category 5 UTP cable transmit data?
A. 10 Mb/s
B. 100 Mb/s
C. 1000 Mb/s
D. 10000 Mb/s
Answer: C
Q2. The Ethernet specification details several different fiber optic media types. What is the wire transmission speed for 100BASE-FX Ethernet?
A. 10 Mb/s
B. 100 Mb/s
C. 1000 Mb/s
D. 10000 Mb/s
Answer: B
Q3. Which Cisco Nexus 5000 Series model supports 1/10G BASE-T ports?
A. Cisco Nexus 5548P
B. Cisco Nexus 5548UP
C. Cisco Nexus 5596UP
D. Cisco Nexus 5596T
Answer: D
Q4. What is the wire transmission speed for 100GBASE-ER4 Ethernet?
A. 100 Mb/s
B. 1 Gb/s
C. 10 Gb/s
D. 100 Gb/s
Answer: D
Q5. Which command can be used to exit to EXEC mode from this current mode?
switch(config-if) #
A. Ctrl-C
B. Ctrl-L
C. quit
D. exit
E. end
Answer: E
Q6. Refer to the exhibit.
Which call-out accurately shows the current running version of the Cisco UCS Manager management software?
A. A - UCS Manager running version 1.4(1m)
B. B - IO Module 1 running version 1.4(1m)
C. C - Interface Card 1 running version 1.4(1m)
D. D - Kernel running version 4.2(1)N(1.4m)
Answer: A
Q7. What is the correct path to verify the Overall Status of Chassis 1 | Server 3?
A. Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 Status tab
B. Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 General tab
C. Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 FSM tab
D. Servers Tab > Chassis > Server 3 General tab
E. Status Tab > Chassis > Chassis 1 > Servers > Server 3
F. Admin Tab > Chassis > Chassis 1 > Servers > Server 3 General tab
Answer: B
Q8. Which processor option is supported in the Cisco UCS C420 M3 Server?
A. up to two Intel Xeon E5-4600 series multicore processors
B. up to two Intel Xeon E7-4800 series multicore processors
C. up to four Intel Xeon E5-4600 series multicore processors
D. two or four Intel Xeon E7-8800 series multicore processors
Answer: C
Q9. After installation or replacement of a Cisco UCS C-Series Rack-Mount Server, the host does not boot.
Which four options should be verified? (Choose four.)
A. Verify the power source to the equipment.
B. Check for loose HDD cables.
C. Reseat the DIMMs, CPU, and PCI cards.
D. Verify that power supplies are receiving power.
E. Reseat the mezzanine card connector.
F. Check the CPU sockets for bent pins.
G. Check the Cisco IMC for fan faults.
Answer: A,C,D,F
Q10. Which command saves the active configuration to NVRAM?
A. copy startup-config running-config
B. copy active-config backup-config
C. copy running-config startup-config
D. copy backup-config active-config
Answer: C