Cause all that matters here is passing the Cisco 010-151 exam. Cause all that you need is a high score of 010-151 Cisco Certified Technician (CCT) for Data Center exam. The only one thing you need to do is downloading Ucertify 010-151 exam study guides now. We will not let you down with our money-back guarantee.
2026 New 010-151 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/010-151/
Q1. What is the correct path to verify the Overall Status of Chassis 1 | Server 3?
A. Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 Status tab
B. Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 General tab
C. Equipment Tab > Chassis > Chassis 1 > Servers > Server 3 FSM tab
D. Servers Tab > Chassis > Server 3 General tab
E. Status Tab > Chassis > Chassis 1 > Servers > Server 3
F. Admin Tab > Chassis > Chassis 1 > Servers > Server 3 General tab
Answer: B
Q2. Which two remote file system methods are used in the training material to transfer firmware to the Fabric Interconnect? (Choose two.)
A. FTPS
B. FTP
C. TFTP
D. RSH
Answer: B,C
Q3. After installation or replacement of a Cisco UCS C-Series Rack-Mount Server, the host does not boot.
Which four options should be verified? (Choose four.)
A. Verify the power source to the equipment.
B. Check for loose HDD cables.
C. Reseat the DIMMs, CPU, and PCI cards.
D. Verify that power supplies are receiving power.
E. Reseat the mezzanine card connector.
F. Check the CPU sockets for bent pins.
G. Check the Cisco IMC for fan faults.
Answer: A,C,D,F
Q4. Which three components are hot swappable in a Cisco UCS Blade Server and Chassis? (Choose three.)
A. Fabric Extender
B. Power supply
C. Heat sink
D. SAS Hard Drive
E. 2x8GB Kit DIMMs
F. Mezzanine card
Answer: A,B,D
Q5. Which command saves the active configuration to NVRAM?
A. copy startup-config running-config
B. copy active-config backup-config
C. copy running-config startup-config
D. copy backup-config active-config
Answer: C
Q6. Which type of connection across the network does a SAN allow for multiple servers to access an unlimited amount of storage devices?
A. any-to-many
B. many-to-any
C. any-to-any
D. any-to-one
E. one-to-any
F. one-to-one
Answer: C
Q7. Which two commands allow you to view the state of high availability between the two clustered Fabric Interconnects? (Choose two.)
A. show cluster state extended
B. show cluster extended-state
C. show cluster HA status
D. show cluster state
Answer: B,D
Q8. Which type of optics module is supported by a 6-port 40 GE Cisco Nexus 7000 M2 Series I/O module?
A. CPAK
B. QSFP+
C. SFP/SFP+
D. CFP
Answer: B
Q9. Which two statements about PCIe are true? (Choose two.)
A. The PCIe link is built around dedicated unidirectional couples of serial, point-to-point connections known as lanes.
B. You can install a PCI Express x8 adapter into an x4 slot.
C. The PCIe standard is a bus-based system in which all the devices share the same bidirectional, 32-bit or 64-bit, parallel signal path.
D. The PCIe 1.0 standard doubles the transfer rate compared to PCIe 2.0.
E. A link that is composed of four lanes is called an x4 link.
Answer: A,E
Q10. Refer to the exhibit.
Where is the best place to see whether the system is ready for a Fabric Interconnect failover?
A. A - Overall Status operable
B. B - L1 Connection
C. C - Part Details
D. D - Access
E. E - High Availability Details
Answer: E