How Many Questions Of 1Z0-597 Practice Test

NEW QUESTION 1
In the ILOM if you redirect HTTP connections to HTTPS, but disable HTTPS, what will be the result?

• A. You will only be able to access the ILOM web interface via HTTPS, since HTTPS cannot be disabled.
• B. You will be able to access the ROM web interface via HTTP or HTTPS.
• C. You will only be able to accessthe ILOM web Interface via HTTP.
• D. You will not be able to access the ILOM web interface.

Answer: D

Explanation:

Reference:http://docs.oracle.com/cd/E19201-01/820-6411- 12/configcomm_web.html(enable http or https web access, see the note)

NEW QUESTION 2
You are running Oracle Solaris on a SPARC T4 server and wish to enable network traffic control and guest domains. What action needs to be performed?

• A. Nothing, since networking between the control and guest domains are automatically enabled
• B. Add a virtual network device to each guest domain
• C. Configure the virtual switch device as a network device
• D. Set up an I/O domain that has direct access to a physical I/O device

Answer: B

NEW QUESTION 3
The amount of disk space recommended by the Enterprise Installation Standards (EIS) for
the root slice is for UFS File and Solaris 10.

• A. 5 GB
• B. 10 GB
• C. 13 GB
• D. 18 GB

Answer: A

NEW QUESTION 4
On a SPARC T4 server running Oracle Solaris 11, you execute the following:
% beaddm create alt_krit What is the result?

• A. Creates a snapshot of the boot environment "alt_krit"
• B. Makes "alt_krit" the default boot environment
• C. Renames the default boot environment to "alt_krit"
• D. Creates a new boot environment named "alt_krit"

Answer: D

Explanation:

Reference:https://blogs.oracle.com/jsavit/entry/running_solaris_11_as_a

NEW QUESTION 5
As part of a server consolidation project, a customer would like to run Solaris 9-based applications on a SPARC T4 server. What technology is required?

• A. Oracle VM Server for SPARC
• B. Oracle Solaris Containers
• C. Dynamic Domains
• D. Oracle VirtualBox

Answer: A

NEW QUESTION 6
In the following example, Power OnSelfTest(POST) reports an uncorrectablememory error affectingthe following locations:
/SYS/PM0/CMP0/B0B0/CH1/D0
/SYS/PM0/CMP0/B0B1/CH1/D0
The error wasdetected by POST running on which node, core, and standard?

• A. Node 0, core 7, strand 2
• B. Node 2, core 7, strand 0
• C. Node 7, core 2, strand 0
• D. Node 0, core 2, strand 7

Answer: A

NEW QUESTION 7
You have the Oracle ILOM keyswitch_state=standby. What is the Impact ?

• A. The system will power on and run power-on self-test (POST), but Oracle Solaris will not boot.
• B. The system will power on and run power-on self-test (POST), but no flash updates can be made.
• C. The system cannot power on.
• D. The system powers on, but does not run power-on self-test (POST) or boot Oracle Solaris.

Answer: D

NEW QUESTION 8
A power supply fails on a SPARC T4-4 server and a replacement is not available. What should you do?

• A. Remove the failed power supply immediately
• B. Leave the failed power supply installed
• C. Power down the server
• D. Unconfigure the failed power supply

Answer: B

Explanation:

Reference:http://docs.oracle.com/cd/E23411_01/html/E23412/z40002a31392437.html(See the note)

NEW QUESTION 9
What is out-of-order execution?

• A. A feature of certain processors, where instructions are processed based on the availability of data.
• B. A feature multicore processors, where a core can be given processing priority over the other cores.
• C. A memory architecture feature, where specific data can be delivered to processors at the fastest possible rate.
• D. A feature of certain operating systems, where programs are executed based on the availability of data.

Answer: C

NEW QUESTION 10
In order to consolidate the applications on a SPARC T4 server, you require virtual machines that run an independent operating system instance. Which virtualization technology did you select?

• A. Oracle Solaris containers
• B. Dynamic Domains
• C. Oracle VM Server for SPARC
• D. Oracle VirtualBox

Answer: C

Explanation:

Reference:http://www.oracle.com/technetwork/server-storage/sun-sparc-enterprise/documentation/o11-090-sparc-t4-arch-496245.pdf(page 25, first para)

NEW QUESTION 11
You have set up power on self test (POST) to run when the scrvrr has been reset by the user. The customer would like POST to run any error-invoked reset. How is this accomplished?

• A. Change the diagnostic level to "max" (user_reset_level = max).
• B. Change the diagnostic trigger to "error reset" (trigger = error-reset).
• C. Change the verbosity to "debug" (user_reset verbosity = debug).
• D. Change the diagnostic trigger to "power on-reset" (trigger = power-on-reset).

Answer: B

NEW QUESTION 12
According to Enterprise Installation Standards (EIS), which is recommended when creating virtual disk devices for use in guest domain?

• A. Create a new volume from an existing ZFS pool
• B. Use file containers
• C. Use the file containers and ZFS clones to multiply images
• D. Use a disk slice directly

Answer: C

NEW QUESTION 13
During an installation of a SPARC T4-2 server running Oracle Solaris to, you noticed several missing packages and drivers. What caused this?

• A. You installed an Oracle Solaris metacluster other than SUNWCX all (Entire distribution plus OEM system support).
• B. You are using the Enterprise installation Standards DVD rather than the recommended patch cluster from Oracle support.
• C. You are using an Enterprise Installation Standards DVD that is two months old.
• D. You installed Oracle Solaris 11 rather than Oracle Solaris 10.

Answer: A

NEW QUESTION 14
How many XAUI (10 GbE Attachment Unit Interfaces) ports are provided per SPARC T4 processor?

• A. 1
• B. 2
• C. 3
• D. 4

Answer: B

NEW QUESTION 15
According to the Enterprise Installation Standards (EIS) on electrical grounding, what is the benefit of additional grounding points?

• A. Protect systems by helping to avoid leakage current
• B. Allows racks to support either AC or DC
• C. Allows a rack to support more than two dedicated circuit feeds for higher redundancy
• D. Allows a rack to support more than one UPS system for higher redundancy

Answer: A

NEW QUESTION 16
What package should be installed if you wish to harden the control domain on a SPARC T4 server running Oracle Solaris 10 and Oracle VM Server for SPARC 2.1?

• A. SUNWldm
• B. SUNWdmp2v
• C. SUNWsst
• D. SUNWjass

Answer: D

Explanation:

Reference:http://docs.oracle.com/cd/E27363_01/doc.121/e27511/ftr_ovm_sparc_mgmt.ht
m(15.6.2 - see the first note under this heading)

NEW QUESTION 17
During the initial installation of a SPARC T4-2 server, you notice the SP NET MGT port is not available. What is one possibility?

• A. The SPARC T4-2 does not use the SP NET MGT port.
• B. It must be connected to a Gigabit network.
• C. The network does not use DHCP.
• D. The Oracle ILOM is down.

Answer: C

NEW QUESTION 18
The DIMM slots on a SPARC T4-1 server are currently 1/4 full (i.e., 4 out of 16 DIMM slots are populated).You plan to add four additional DIMMs. How are they installed?

• A. Two DIMMs are inserted into the open slots on branch 1 (BOB1) and 3 (BOB3).
• B. One DIMM is added per branch, into any open slot.
• C. One DIMM is added per branch, into a specific slot.
• D. Two DIMMs are inserted into the open slots on branch 0 (BOB0) and (BOB2).

Answer: C

NEW QUESTION 19
Error conditions by POST, Oracle Solaris Predictive Self-Healing (PSH), and Oracle ILOM are forward to which component for fault handling?

• A. POST
• B. Oracle VTS
• C. Oracle ILOM
• D. Oracle Solaris PSH

Answer: C

Explanation:

Reference:http://docs.oracle.com/cd/E23075_01/pdf/E23078.pdf(page 24, third para)

NEW QUESTION 20
During the acclimatization process, what is the maximum positive or negative temperature
gradient that is permitted for multi-layer boards?

• A. Approximately 2° C (4° F) per hour
• B. Approximately 4° C (7° F) per hour
• C. Approximately 6° C (11° F) per hour
• D. Approximately 8° C (4° F) per hour

Answer: A

NEW QUESTION 21
You are unable to add an Oracle ILOM user account, what is one possibility that would cause this issue?

• A. You need to add SSH keys to the system before creating additional user accounts.
• B. You do not have the user management role enabled.
• C. You do not have the host control role enabled.
• D. You have exceeded the maximum number of 5 user accounts.

Answer: B

NEW QUESTION 22
Based on the Enterprise Installation Standards (EIS), why should Oracle Explorer Data Collector be run with the “-i” switch after initial system power-on and setup are complete?

• A. To remove confidential customer IP addresses from the Explorer output
• B. To provide a baseline of the initial system configuration
• C. To collect local Intelligent Platform management Interface (IPMI) data
• D. To collect remote Oracle ILOM snapshot data

Answer: C

NEW QUESTION 23
......