Our pass rate is high to 98.9% and the similarity percentage between our ccna wireless 200 355 study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Cisco ccna wireless 200 355 official cert guide pdf exam in just one try? I am currently studying for the Cisco ccna wireless 200 355 pdf download exam. Latest Cisco ccna wireless 200 355 official cert guide pdf Test exam practice questions and answers, Try Cisco cisco 200 355 Brain Dumps First.


2026 New 200-355 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/200-355/

Q1. What three characteristics are components of mobility anchoring? (Choose three.) 

A. enabled as a global setting 

B. enabled on a per WLAN basis 

C. restricts clients to a specific subnet 

D. client traffic is tunneled to predefined WLC(s) 

E. only one mobility anchor is allowed per WLAN 

F. acts as master controller for a mobility group 

Answer: B,C,D 

Q2. Which two statements about WiMAX technology are true? (Choose two.) 

A. WiMAX is defined by 802.11i. 

B. Typically, fixed WiMAX networks have a higher-gain directional antenna installed near the client. 

C. WiMAX is capable of working as a long-range system over several miles. 

D. WiMAX works only for licensed frequencies. 

Answer: B,C 

Q3. The network administrator has used VLANs to separate VoIP frames from data frames in the wired network. What must the administrator use to separate those frames in the wireless network? 

A. multiple SSIDs 

B. multiple authentications 

C. multiple WEP or WPA keys 

D. multiple channels 

E. multiple 802.11 radios (a, b, g, n) 

Answer: A 

Q4. The network administrator receives complaints of slow wireless network performance and performs a sniffer trace of the wireless network in preparation for migration to 802.11n. The sample capture shows frames that contains AP beacons with NonERP_Present bit set to 1 and frames with RTS/CTS. 

Which two conclusions can be interpreted from these frames? (Choose two.) 

A. The network is performing slowly because 802.11n clients are already mixed with 802.11g clients. 

B. The network is performing slowly because 802.11b clients still exist in the network. 

C. The network is performing slowly because a wireless client is incorrectly configured, which results in RF interference. 

D. Possible 802.11b wireless clients are located only in the AP cell radius where the sniffer capture was performed. 

E. Possible 802.11b wireless clients could be located anywhere in the wireless network. 

Answer: B,E 

Q5. RAG DROP 

Answer:  

Q6. What are the interface statuses of a lightweight AP working in rogue-detection mode? 

A. radios turned off, Ethernet interface up 

B. radios and Ethernet interfaces up 

C. radios turned on, Ethernet interface shut down 

D. radios turned on, Ethernet interface status controlled by Cisco WLC 

Answer: A 

Q7. A network engineer in the GUI of WCS version 7 wants to add an access point to a map. Where can this command be found within the drop-down menu? 

A. Monitor > Maps 

B. Reports > Maps 

C. Monitor > Network Summary 

D. Configure > Maps 

Answer: A 

Q8. Access points must discover a wireless LAN controller before they can become an active part of the network. In which order does an access point try to discover a controller? 

A. Layer 3 CAPWAP or LWAPP broadcast discovery DHCP option 43 Locally stored controller IP address discovery DNS controller name resolution 

B. Layer 3 CAPWAP or LWAPP broadcast discovery Locally stored controller IP address discovery DNS controller name resolution DHCP option 43 

C. Layer 3 CAPWAP or LWAPP broadcast discovery Locally stored controller IP address discovery DHCP option 43 DNS controller name resolution 

D. DNS controller name resolution DHCP option 43 Layer 3 CAPWAP or LWAPP broadcast discovery Locally stored controller IP address discovery 

Answer: C 

Q9. A client is deploying lightweight APs. Those with LAN connections to the controller would be considered what mode of deployment, while access points deployed across a higher latency connection are deployed in what mode? 

A. HREAP; Bridge 

B. Local; Bridge 

C. HREAP; Flex Connect 

D. Local; Flex Connect 

Answer: D 

Q10. You are testing a new autonomous Cisco Aironet 1260 AP that has booted for the first time on the existing corporate network, which includes voice, data, and location services. 

How do you reach the GUI of the AP? 

A. HTTP to 10.0.0.1. 

B. HTTP to 192.168.1.1. 

C. HTTP to the DHCP address. 

D. HTTPS to 10.0.0.1. 

E. HTTPS to the 192.168.1.1. 

F. HTTPS to the DHCP address. 

Answer: C