Certified of 300 075 pdf exams materials and dumps for Cisco certification for candidates, Real Success Guaranteed with Updated 300 075 vce pdf dumps vce Materials. 100% PASS Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) exam Today!


2026 New 300-075 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-075/

Q1. Refer to the exhibit. 

To permit three G.729 calls, what should the bandwidth value be for the ip rsvp bandwidth command? 

A. 32 

B. 48 

C. 64 

D. 88 

E. 128 

Answer: D 

Q2. Which option is known as the location attribute that the global dialplan replication uses to advertise its dial plan information? 

A. location controller 

B. route pattern 

C. route string 

D. URI 

Answer: C 

Q3. Refer to the exhibit. 

Assume that the HQ phones have access to the HQ partition, and BR phones have access to the BR partition. Which set of implementations would best address the overlapping directory number extensions for intersite (WAN) calling between the HQ site and the BR site? 

A. Configure a route pattern 8222.[12]XXX for site HQ, and assign it to partition HQ. Configure the called party DDI of Predot.Configure a route pattern for site BR 8111.[1-3]XXX, and assign it to partition BR. Configure called party DDI Predot.Use the local gateway at each site. Prefix the appropriate site code for the calling number. 

B. Configure a single route pattern for both sites 8[12,12,12].[1-32]XXX. Use a route list that contains the local route group for each site. Prefix the appropriate site code for the calling number. 

C. Configure a translation pattern 8222.[12]XXX for site HQ, and assign it to partition HQ. Use a CSS that contains the partitions for BR phones.Configure a translation pattern 8111.[1-3]XXX for site BR, and assign it to partition BR. Use a CSS that contains the partitions for HQ phones.For both translation patterns, configure the called party DDI of Predot. Prefix the appropriate site code for the calling number. 

D. Configure a translation pattern 8222.[12]XXX for site HQ, and assign it to partition BR. Use a CSS that contains the partitions for HQ phones.Configure a translation pattern 8111.[1-3]XXX for site BR, and assign it to partition HQ. Use a CSS that contains the partitions for BR phones.For both translation patterns, configure the called party DDI of Predot. Prefix the appropriate site code for the calling number. 

Answer: C 

Q4. When an incoming PSTN call arrives at an H.323 gateway, how does the called number get normalized to an internal directory number in Cisco Unified Communications Manager? 

A. Normalization is done by configuring the significant digits for inbound calls on the H.323 gateway configuration in Cisco Unified Communications Manager. 

B. Normalization is done using route patterns. 

C. Normalization is done using the gateway incoming calling party prefixes based on number type. 

D. Normalization is achieved by local route group that is assigned to the H.323 gateway. 

Answer: A 

Q5. Where do you specify the device mobility group and physical location after they have been configured? 

A. phones 

B. DMI 

C. device mobility CSS 

D. device pool 

E. MRGL 

F. locale 

Answer: D 

Explanation: 

Incorrect Answer: A, B, C, E Before you configure a device pool, you must configure the following items if you want to choose them for the device pool, Cisco Unified Communications Manager group (required), Date/time group (required). Region (required) , SRST reference (optional). Media resource group list (optional), Calling search space for auto-registration (optional). Reverted call focus priority (optional), Device mobility group (optional), Device mobility calling search space, Physical location (optional). Location, AAR group. AAR calling search space. Link: 

https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmcfg/b02devpl.ht ml 

Q6. Refer to the exhibit. 

When a user presses a speed dial to +442079460255 when the SAF network is down, which event should occur? 

A. The call will reroute via the PSTN with the constructed PSTN number as 442079460255. 

B. The call will reroute via the PSTN with the constructed PSTN number as +442079460255. 

C. The call will reroute via the PSTN with the constructed PSTN number as 00442079460255. 

D. The call will fail because the ToDID is 0:. 

E. The call will fail because the called number will be 2079460255. 

Answer: B 

Q7. How is the region assigned to a device such as an IP phone? 

A. Regions are assigned directly in the device configuration page. 

B. Regions can be assigned only through a device pool. 

C. Regions can be assigned either directly on the device configuration page or through the device pool. If both configurations exist, the device pool region configuration takes precedence. 

D. Regions can be assigned either directly on the device configuration page or through the device pool. If both configurations exist, the device region configuration takes precedence. 

Answer: B 

Q8. When a SIP trunk is added for Call Control Discovery, which statement is true? 

A. The SIP trunk is added by selecting SIP Trunk and SIP Protocol. The Enable SAF check box should be selected. 

B. The SIP trunk is added by selecting SIP Trunk and SIP Protocol. The Trunk Service Type should be Call Control Discovery. 

C. The SIP trunk is added by selecting Call Control Discovery Trunk and then selecting SIP as the protocol to be used. 

D. The SIP trunk is added by selecting SIP Trunk and SIP Protocol. The destination IP address field is configured as ‘SAF’ to indicate that this trunk is used for SAF. 

Answer: B 

Q9. Refer to the exhibit. 

The HQ site uses area code 650. The BR1 site uses area code 408. The long distance national code for PSTN dialing is 1. To make a long distance national call, an HQ or BR1 user dials access code 9, followed by 1, and then the 10-digit number. Both sites use MGCP gateways. AAR must use globalized call routing using a single route pattern. Assume that all outgoing PSTN numbers are localized at the egress gateway as shown in the exhibit. Which statement is true? 

A. The AAR group system must be configured on the device configuration of the phones. 

B. The AAR group system must be configured on the line configuration of the phones. 

C. The single AAR group system cannot be used. A second AAR group must be configured in order to have source and destination AAR groups. 

D. The AAR group system must be configured under the AAR service parameters. 

Answer: B 

Q10. Which three commands are necessary to override the default CoS to DSCP mapping on interface Fastethernet0/1? (Choose three.) 

A. mls qos map cos-dscp 0 10 18 26 34 46 48 56 

B. mls qos map dscp-cos 8 10 to 2 

C. mls qos 

D. interface Fastethernet0/1mls qos trust cos 

E. interface Fastethernet0/1mls qos cos 1 

F. interface Fastethernet0/2mls qos cos 1 

Answer: A,C,D