It is impossible to pass Cisco 300 075 dump exam without any help in the short term. Come to Examcollection soon and find the most advanced, correct and guaranteed Cisco cisco 300 075 practice questions. You will get a surprising result by our Up to the minute Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) practice guides.
2026 New 300-075 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-075/
Q1. Which technologies provide remote-site redundancy for Cisco IP Phones during a WAN failure?
A. SRST and MGCP fallback
B. SRST and TEHO
C. TEHO and MGCP fallback
D. SRST and AAR
Answer: A
Q2. Refer to the exhibit.
The exhibit shows centralized Cisco Unified Communications Manager configuration components for TEHO calls to U.S. area code 408 from the U.K. The PSTN access code for the U.K. is 9 and 001 for international calls to the U.S. Assuming the PSTN does not accept globalized numbers with + prefix. What should the Called Party Transformation Pattern at the U.S. gateway be configured as?
A. +.! with the following Called Party Transformation:Discard Digits PreDot Prefix Digits Outgoing Calls: +
B. +1.! with the following Called Party Transformation:Discard Digits PreDot Prefix Digits Outgoing Calls: None
C. +408.! with the following Called Party Transformation:Discard Digits PreDot Prefix Digits Outgoing Calls: 1
D. +1408.! with the following Called Party Transformation:Discard Digits PreDot Prefix Digits Outgoing Calls: None
E. +1.408! with the following Called Party Transformation:Discard Digits PreDot Prefix Digits Outgoing Calls: None
Answer: D
Q3. Which commands are needed to configure Cisco Unified Communications Manager Express in SRST mode?
A. telephony-service and srst mode
B. telephony-service and moh
C. call-manager-fallback and srst mode
D. call-manager-fallback and voice-translation
Answer: A
Q4. Which two statements are true regarding the implementation of globalized call-routing in terms of localized call egress? (Choose two.)
A. Calling-party numbers are routed from the gateway or trunks to phones.
B. Called-party numbers are routed from the gateway or trunks to phones.
C. Calling-party numbers of internal calls are routed from the gateway or trunks.
D. Calling-party calls are routed to the gateway and trunks.
Answer: A,D
Q5. Which two statements describe RSVP-enabled locations-based CAC? (Choose two.)
A. RSVP can be enabled selectively between pairs of locations.
B. Using RSVP for CAC simply allows admitting or denying calls based on a logical
configuration that is ignoring the physical topology.
C. RSVP is topology aware, but only works with full mesh networks.
D. An RSVP agent is a Media Termination Point that the call has to flow through.
E. RSVP and RTP are used between the two endpoints.
Answer: A,D
Explanation:
Incorrect Answer: B, C The RSVP policy that is configured for a location pair overrides the default interlocation RSVP policy that configure in the Service Parameter Configuration window. RSVP supports audio, video, and data pass-through. Video data pass-through allows video and data packets to flow through RSVP agent and media termination point devices Link: https://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02rsvp.ht ml#wp1070214
Q6. Which two options must be selected in the SIP Trunk Security Profile configuration between Cisco Unified Communications Manager and Expressway? (Choose two)
A. Enable application-level authorization
B. Accept presence subscription
C. Accept out-of-dialog refer
D. Accept unsolicited notification
E. Accept replaces header
F. Transmit security status
G. Allow charging header
Answer: D,E
Q7. Enabling authentication and encryption for CTI, JTAPI, and TAPI applications requires which two tasks? (Choose two.)
A. Enter the encryption key into the application.
B. Set up an IPsec association between the application and Cisco Unified CallManager.
C. Configure related security parameters in the CTI, JTAPI, and TAPI application.
D. Add the application user or end users to the Standard CTI Secure Connection user group, Standard CTI Allow Reception of SRTP Key Material user group, and Standard CTI Enabled user group.
Answer: C,D
Explanation:
Incorrect Answer: A, B You must also add the application users or the end users to the Standard CTI Secure Connection user group in Cisco Unified Communications Manager Administration to enable TLS for the application. After you add the user to this group and install the certificate, the application ensures that the user connects via the TLS port. Link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/security/8_6_1/secugd/secucti.htm l#wp1166397
Q8. Company X has three locations connected via a low bandwidth WAN. Which two configurations are required in the Cisco Unified Communications Manager regions to provide the most suitable use of bandwidth while preserving the call quality? (Choose two.)
A. g729 codec for intraregion calling
B. g722/g711 codec for interregion calling
C. g729 codec for interregion calling
D. g722/g711 for intraregion calling
E. g729 codec for all calling
F. g722/g711 codec for all calling
Answer: C,D
Q9. Which E.164 transformation pattern represents phone numbers in Germany?
A. +49.!
B. 49.!
C. 49.!
D. +49.X
Answer: A
Q10. Scenario
There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.
Use the exhibits to answer the following questions.
SX20 System Information
DX650 Configuration
MRGL
DP
Locations
AARG
CSS
Movi Failure
Movi Settings
Which device configuration option will allow an administrator to assign a device to specific rights for making calls to specific DNs?
A. Media Resource Group List
B. Device Pool
C. Location
D. AAR Group
E. Calling Search Space
Answer: E
Explanation:
A partition comprises a logical grouping of directory numbers (DNs) and route patterns with similar reachability characteristics. Devices that are typically placed in partitions include DNs and route patterns. These entities associate with DNs that users dial. For simplicity, partition names usually reflect their characteristics, such as "NYLongDistancePT," "NY911PT," and so on. A calling search space comprises an ordered list of partitions that users can look at before users are allowed to place a call. Calling search spaces determine the partitions that calling devices, including IP phones, softphones, and gateways, can search when attempting to complete a call.