We provide real 300 075 vce exam questions and answers braindumps in two formats. Download PDF & Practice Tests. Pass Cisco 300 075 dump Exam quickly & easily. The 300 075 dump PDF type is available for reading and printing. You can print more and practice many times. With the help of our Cisco cisco 300 075 dumps pdf and vce product and material, you can easily pass the 300 075 pdf exam.
2026 New 300-075 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-075/
Q1. Cisco Unified border element is configured to support RSVP-based CAC. When is the RSVP path and reservation message sent and received?
A. Immediately after the call setup message is received and the reservation message is received after H.245 capabilities negotiation is completed.
B. The path and reservation messages are sent and received after the H.245 capabilities negotiation is completed.
C. The path and reservation messages are sent and received immediately after the call setup message is received.
D. The path is setup once the global command call rsvp-sync is configured.
Answer: C
Q2. Refer to the exhibit.
Locations-based CAC has been configured between HQ and the BR site. Assume that the priority queue has been provisioned correctly for three G.729 calls. What happens when
the fourth call is placed from HO to BR?
A. The call will get through via the WAN. But it will experience poor audio quality.
B. The call will fail.
C. The call will be queued until one of the existing calls drop.
D. The call will get through without any issues.
Answer: B
Q3. Refer to the exhibit. A user in RTP calls a phone in San Jose during congestion with Call Forward No Bandwidth (CFNB) configured to reach cell phone 4085550150. The user in RTP sees the message "Not Enough Bandwidth" on their phone and hears a fast busy tone. Which two conditions can correct this issue? (Choose two.)
A. The calling phone (RTP) needs to have AAR Group value of AAR under the AAR Settings.
B. The called phone (San Jose) needs to have AAR Group value of AAR under the AAR Settings.
C. The calling phone (RTP) needs to have the AAR destination mask of 914085550150 configured under the AAR Settings.
D. The calling phone (RTP) needs to have the AAR destination mask of 4085550150 configured under the AAR Settings.
E. The called phone (San Jose) needs to have the AAR destination mask of 914085550150 configured under the AAR Settings.
F. The called phone (San Jose) needs to have the AAR destination mask of 4085550150 configured under the AAR Settings.
Answer: B,F
Explanation:
Incorrect Answer: A, C, D, E Automated alternate routing (AAR) provides a mechanism to reroute calls through the PSTN or other network by using an alternate number when Cisco Unified Communications Manager blocks a call due to insufficient location bandwidth. With automated alternate routing, the caller does not need to hang up and redial the called party. Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b03aar.ht ml
Q4. A Cisco 3825 needs to be added in Cisco Unified Communications Manager as an H.323 gateway. What should the gateway type be?
A. H.323 gateway
B. Cisco 3825
C. Cisco 3800 series router. The specific model will be selected after the Cisco 3800 is selected.
D. The gateway can be added either as an H.323 gateway or Cisco 3800 series router.
E. The gateway can be added either as an H.323 gateway or Cisco 3825 series router.
Answer: A
Q5. When an external call is placed from Ajax, they would like the ANI that is sent to the PSTN to be the main number, not the extension. For domestic calls, they would like 10 digits sent; for international calls, they would like to send the country code 1 and the 10 digits. How can this be accomplished?
A. Add a translation pattern to the dial peers in the gateway that adds the appropriate digits to the outgoing ANI.
B. In the external call route patterns, set the external phone number mask to the main number. Use 10 digits in the domestic route pattern and 1 followed by the main number digits in the international route patterns.
C. Use a calling party transform mask for each route group in the corresponding route list configuration. Set the explicit 10-digit main number for domestic calls and 1 followed by the main number for the international route patterns.
D. In the directory number configurations, set the prefix digits field to the country code and the 10 digits of the main number. This will be truncated to the 10-digit number for domestic calls and sent out in its entirety for international calls.
Answer: C
Explanation:
Incorrect Answer: A, B, D calling party transformation mask value is Valid entries for the NANP include the digits 0 through 9; the wildcard characters X, asterisk (*), and octothorpe (#); and the international escape character +. Link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucmbe/admin/8_6_1/ccmcfg/b03trpat.ht ml
Q6. When device mobility mode is enabled or disabled for a cluster, to which does the cluster setting apply?
A. all phones in the cluster that support device mobility
B. all phones in the cluster that subscribed to device mobility
C. mobile phones in the cluster that support device mobility
D. mobile phones in the cluster that are in default mode
Answer: A
Q7. The relationship between a Region and a Location is that the Region codec parameter is combined with Location bandwidth when communicating with other Regions.
A. FALSE
B. TRUE
Answer: A
Explanation:
Locations work in conjunction with regions to define the characteristics of a network link. Regions define the type of compression (G.711, G.722, G.723, G.729, GSM, or wideband) that is used on the link, and locations define the amount of available bandwidth for the link Link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a02cac.html #wp1033331
Q8. Refer to the exhibit.
The exhibit shows centralized Cisco Unified Communications Manager configuration components for TEHO calls to U.S. area code 408 from the U.K. The PSTN access code for the U.K. is 9 and 001 for international calls to the U.S. What should the TEHO-US route list configuration consist of?
A. First route group should point only to the U.K. gateway. The second route group should point to the U.S. gateway.
B. First route group should be only the local route group. The second route group should point to the U.S. gateway.
C. First route group should point only to the U.S. gateway. The second route group should be the local route group.
D. The TEHO-US route list should contain only the local route group. The globalized configuration means that the appropriate gateway will be selected automatically.
E. The +! route pattern should point directly to the U.S. gateway.
Answer: C
Explanation:
Incorrect Answer: A, B, D The route group points to one or more gateways and can choose the gateways for call routing based on preference. The route group can serve as a trunk group by directing all calls to the primary device and then using the secondary devices when the primary is unavailable. One or more route lists can point to the same route group. Link:
http://www.ciscosystems.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08 gw.html#wp1167274
Q9. Which two Cisco Extension Mobility attributes are available in the user device profile? (Choose two.)
A. regions
B. description
C. phone button template
D. NTP information
Answer: B,C
Q10. Which three configuration settings are included in a default region configuration? (Choose three.)
A. Audio Codec
B. Video Call Bandwidth
C. Link Loss Type
D. Location Description
E. Immersive Bandwidth
F. Real Time Protocol
Answer: A,B,C