Our pass rate is high to 98.9% and the similarity percentage between our ccnp 300 101 pdf study guide and real exam is 90% based on our seven-year educating experience. Do you want achievements in the Cisco 300 101 dumps exam in just one try? I am currently studying for the Cisco ccnp 300 101 dumps exam. Latest Cisco route 300 101 Test exam practice questions and answers, Try Cisco route 300 101 Brain Dumps First.


2026 New 300-101 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-101/

P.S. Vivid 300-101 Q&A are available on Google Drive, GET MORE: https://drive.google.com/open?id=1VVsMJd1T1ylej0aePOIREXo7V31c7pn0


New Cisco 300-101 Exam Dumps Collection (Question 4 - Question 13)

Q1. Which three steps are most helpful in verifying proper route redistribution? (Choose three.)

A. On the routers not performing the route redistribution, use the show ip route command to see if the redistributed routes show up.

B. On the ASBR router performing the route redistribution, use the show ip protocol command to verify the redistribution configurations.

C. On the ASBR router performing the route redistribution, use the show ip route command to verify that the proper routes from each routing protocol are there.

D. On the routers not performing the route redistribution, use the show ip protocols command to verify the routing information sources.

E. On the routers not performing the route redistribution, use the debug ip routing command to verify the routing updates from the ASBR.

Answer: A,B,C

Explanation:

In order to verify proper route redistribution, use the u201cshow ip routeu201d command on all routers within the network, as well as the ABSR, to verify that the routes are properly being advertised to all routers. In addition, issuing the u201cshow ip protocolu201d can be used on the router performing the redistribution to verify that routes are being redistributed into each other.


Q2. Refer to the exhibit.

A new TAC engineer came to you for advice. A GRE over IPsec tunnel was configured, but the tunnel is not coming up.

What did the TAC engineer configure incorrectly?

A. The crypto isakmp configuration is not correct.

B. The crypto map configuration is not correct.

C. The interface tunnel configuration is not correct.

D. The network configuration is not correct; network 172.16.1.0 is missing.

Answer: A


Q3. A network engineer is configuring a routed interface to forward broadcasts of UDP 69, 53, and 49 to 172.20.14.225. Which command should be applied to the configuration to allow this?

A. router(config-if)#ip helper-address 172.20.14.225

B. router(config-if)#udp helper-address 172.20.14.225

C. router(config-if)#ip udp helper-address 172.20.14.225

D. router(config-if)#ip helper-address 172.20.14.225 69 53 49

Answer: A


Q4. Refer to the exhibit.

You have correctly identified the inside and outside interfaces in the NAT configuration of this device. Which effect of this configuration is true?

A. dynamic NAT

B. static NAT

C. PAT

D. NAT64

Answer: C


Q5. What does the number 16 in the following command represent?

Router(config)#snmp-server user abcd public v2c access 16

A. the mask of the files that are allowed to use community string public.

B. the standard named access list 16, which contains the access rules that apply to user abcd.

C. the number of concurrent users who are allowed to query the SNMP community.

D. the user ID that is allowed to use the community string public.

Answer: B


Q6. Refer to the exhibit.

After you apply this configuration to router R1, it fails to establish an eBGP neighbour relationship with R2. Which action do you take to correct the problem?

A. Configure the update-source for 10.1.1.2

B. Change the ebgp-multihop value to 1.

C. Add the no synchronization statement at the end of the configuration.

D. Replace the maximum-paths command at the end of the configuration with maximum- paths ibgp 4 import 2.

Answer: A


Q7. A corporate policy requires PPPoE to be enabled and to maintain a connection with the ISP, even if no interesting traffic exists. Which feature can be used to accomplish this task?

A. TCP Adjust

B. Dialer Persistent

C. PPPoE Groups

D. half-bridging

E. Peer Neighbor Route

Answer: B


Q8. Which feature can mitigate fragmentation issues within network segments that are between GRE endpoints?

A. PMTU

B. ICMP DF bit

C. TCP Flow Control

D. TCP MSS

Answer: D


Q9. Which set of actions does a network engineer perform to set the IPv6 address of a DHCP relay server at the VLAN interface level?

A. Enter the VLAN interface configuration mode and define the IPv6 address of a DHCP relay server

B. Enter the global configuration mode and enable the IPv6 DHCP relay

C. Enter the global configuration mode, enable IPv6 DHCP relay from interface configuration mode and define the IPv6 address of a DHCP relay server

D. Enter the VLAN interface configuration mode, enable IPv6 DHCP relay, and define the IPv6 address of a DHCP relay server

Answer: D

Explanation: You can accept DHCP requests from clients on the associated context or VLAN interface and enable the DHCP relay agent by using the ipv6 dhcp relay enable command (for IPv6) or the ip dhcp relay enable command (for IPv4). The DHCP relay starts forwarding packets to the DHCP server address specified in the ipv6 dhcp relay server command or the ip dhcp relay server command for the associated context or VLAN interface.


Q10. Which prefix is matched by the command ip prefix-list name permit 10.8.0.0/16 ge 24 le 24?

A. 10.9.1.0/24

B. 10.8.0.0/24

C. 10.8.0.0/16

D. 10.8.0.0/23

Answer: B


Recommend!! Get the Vivid 300-101 dumps in VCE and PDF From Examcollectionplus, Welcome to download: https://www.examcollectionplus.net/vce-300-101/ (New 487 Q&As Version)