Proper study guides for Refresh Cisco Implementing Cisco Edge Network Security Solutions certified begins with Cisco ccnp security senss 300 206 official cert guide preparation products which designed to deliver the Real cisco 300 206 questions by making you pass the ccnp security senss 300 206 official cert guide pdf test at your first time. Try the free cisco 300 206 demo right now.
2026 New 300-206 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-206/
Q1. CORRECT TEXT
You are a network security engineer for the Secure-X network. You have been tasked with implementing dynamic network object NAT with PAT on a Cisco ASA.
You must configure the Cisco ASA such that the source IP addresses of all internal hosts are translated to a single IP address (using different ports) when the internal hosts access the Internet.
To successfully complete this activity, you must perform the following tasks:
. Use the Cisco ASDM GUI on the Admin PC to configure dynamic network object NAT with PAT using the following parameters:
. Network object name: Internal-Networks
. IP subnet: 10.10.0.0/16
. Translated IP address: 192.0.2.100
. Source interface: inside
. Destination interface: outside
NOTE: The object (TRANSLATED-INSIDE-HOSTS) for this translated IP address has already been created for your use in this activity.
NOTE: Not all ASDM screens are active for this exercise.
NOTE: Login credentials are not needed for this simulation.
. In the Cisco ASDM, display and view the auto-generated NAT rule.
. From the Employee PC, generate traffic to SP-SRV by opening a browser and navigating to http://sp-srv.sp.public.
. From the Guest PC, generate traffic to SP-SRV by opening a browser and navigating to http://sp-srv.sp.public.
. At the CLI of the Cisco ASA, display your NAT configuration. You should see the configured policy and statistics for translated packets.
. At the CLI of the Cisco ASA, display the translation table. You should see dynamic translations for the Employee PC and the Guest PC. Both inside IP addresses translate to the same IP address, but using different ports.
You have completed this exercise when you have configured and successfully tested dynamic network object NAT with PAT.
Answer: Use the following configuration as per exhibit in explanation.
Q2. Which statement about the configuration of Cisco ASA NetFlow v9 (NSEL) is true?
A. Use a sysopt command to enable NSEL on a specific interface.
B. To view bandwidth usage for NetFlow records, you must have QoS feature enabled
C. NSEL tracks the flow continuously and provides updates every 10 seconds.
D. You must define a flow-export event type under a policy.
E. NSEL can be used without a collector configured.
Answer: D
Explanation:
http://www.cisco.com/c/en/us/td/docs/security/asa/asa84/configuration/guide/asa_84_cli_co nfig/ monitor_nsel.html
Q3. Enabling what security mechanism can prevent an attacker from gaining network topology information from CDP?
A. MACsec
B. Flex VPN
C. Control Plane Protection
D. Dynamic Arp Inspection
Answer: A
Q4. What is the best description of a unified ACL on a Cisco firewall?
A. An ACL with both IPv4 and IPv6 functionality.
B. An IPv6 ACL with IPv4 backwards compatibility.
C. An IPv4 ACL with IPv6 support.
D. An ACL that supports EtherType in addition to IPv6.
Answer: A
Explanation:
http://www.cisco.com/c/en/us/td/docs/security/asa/asa90/configuration/guide/asa_90_cli_co nfig/ intro_intro.html
Q5. Refer to the exhibit.
To protect Host A and Host B from communicating with each other, which type of PVLAN port should be used for each host?
A. Host A on a promiscuous port and Host B on a community port
B. Host A on a community port and Host B on a promiscuous port
C. Host A on an isolated port and Host B on a promiscuous port
D. Host A on a promiscuous port and Host B on a promiscuous port
E. Host A on an isolated port and host B on an isolated port
F. Host A on a community port and Host B on a community port
Answer: E
Q6. What is the result of the default ip ssh server authenticate user command?
A. It enables the public key, keyboard, and password authentication methods. B. It enables the public key authentication method only.
C. It enables the keyboard authentication method only.
D. It enables the password authentication method only.
Answer: A
Q7. You are a security engineer at a large multinational retailer. Your Chief Information Officer recently attended a security conference and has asked you to secure the network infrastructure from VLAN hopping.
Which statement describes how VLAN hopping can be avoided?
A. There is no such thing as VLAN hopping because VLANs are completely isolated.
B. VLAN hopping can be avoided by using IEEE 802.1X to dynamically assign the access VLAN to all endpoints and setting the default access VLAN to an unused VLAN ID.
C. VLAN hopping is avoided by configuring the native (untagged) VLAN on both sides of an ISL trunk to an unused VLAN ID.
D. VLAN hopping is avoided by configuring the native (untagged) VLAN on both sides of an IEEE 802.1Q trunk to an unused VLAN ID.
Answer: D
Q8. In IOS routers, what configuration can ensure both prevention of ntp spoofing and accurate time ensured?
A. ACL permitting udp 123 from ntp server
B. ntp authentication
C. multiple ntp servers
D. local system clock
Answer: B
Q9. Refer to the exhibit. Which command can produce this packet tracer output on a firewall?
A. packet-tracer input INSIDE tcp 192.168.1.100 88 192.168.2.200 3028
B. packet-tracer output INSIDE tcp 192.168.1.100 88 192.168.2.200 3028
C. packet-tracer input INSIDE tcp 192.168.2.200 3028 192.168.1.100 88
D. packet-tracer output INSIDE tcp 192.168.2.200 3028 192.168.1.100 88
Answer: A
Q10. Which cloud characteristic is used to describe the sharing of physical resources between various entities?
A. Multitenancy
B. Ubiquitous access
C. Elasticity
D. Resiliency
Answer: D