Want to know Ucertify 300-360 Exam practice test features? Want to lear more about Cisco Designing Cisco Wireless Enterprise Networks certification experience? Study Download Cisco 300-360 answers to Renew 300-360 questions at Ucertify. Gat a success with an absolute guarantee to pass Cisco 300-360 (Designing Cisco Wireless Enterprise Networks) test on your first attempt.


2026 New 300-360 Exam Dumps with PDF and VCE Free: https://www.surepassexam.com/300-360-exam-dumps.html

Q1. A customer has dual-band devices that they want to use 40 MHz channels. If the customer is using Cisco 3600 Series access points with a 5508 controller. Which setting assists with this change?

A. Enable band select globally.

B. Enable aggressive load balancing.

C. Disable lower data rates on 802 .11G GHz radios.

D. Disable overlapping 802.11G channels.

Answer: A

Q2. An engineer is deploying an outdoor Mesh network. Which four major factors should be considered? (Choose four.)

A. power

B. buildings

C. traffic lights

D. satellite dishes

E. line of sight

F. network connectivity

G. power lines

H. mounting

Answer: A,E,F,H

Q3. An engineer receives a digital image scanned from the floor plans of a facility to be surveyed for wireless survey and imported it into Air Magnet Pro. However, the document contains no scale. Which action can the engineer take to most accurately calibrate the size of the floor plan in Air Magnet?

A. Mark the length of a hallway, then count the ceiling tiles, multiply that number by 2 and enter that value.

B. Zoom in and mark across a hallway, then count the floor tiles across that hallway and enter that value.

C. Zoom in and mark a doorway, then size it at 3 feet because most doorways are 36 inches.

D. Mark the entire longest dimension of the floorplan, then use Google Earth to measure the correspondingoutside dimension and enter that value.

Answer: D

Q4. An engineer is preparing for an indoor wireless LAN survey and is provisioning a survey kit. Which three pieces of equipment should be included? (Choose three.)

A. external connector access point

B. integrated antenna access point

C. coax low-loss cable

D. battery operated power supply

E. range finder

F. Yagi antennas

Answer: B,D,E

Q5. An engineer is configuring an autonomous AP for RADIUS authentication. What three pieces of information must be known to configure the AP? (Choose three.)

A. BVI IP address

B. group name

C. RADIUS IP address

D. PAC encryption key

E. username and password

F. shared secret

Answer: A,C,F

Q6. A customer has restricted the AP and antenna combinations for a design to be limited to one model integrated antenna AP for carpeted spaces and one model external antenna AP, with high gain antennas for industrial, maintenance, or storage areas. When moving between a carpeted area to an industrial area, the engineer forgets to change survey devices and surveys several APs. Which option is the best to reduce the negative impact of the design?

A. Deploy the specified access points per area type.

B. Resurvey and adjust the design.

C. Increase the Tx power on incorrectly surveyed access points.

D. Deploy unsurveyed access points to the design.

Answer: B