we provide Precise Cisco 300-375 test which are the best for clearing 300-375 test, and to get certified by Cisco WISECURE Securing Cisco Wireless Enterprise Networks. The 300-375 Questions & Answers covers all the knowledge points of the real 300-375 exam. Crack your Cisco 300-375 Exam with latest dumps, guaranteed!


2026 New 300-375 Exam Dumps with PDF and VCE Free: https://www.2passeasy.com/dumps/300-375/

Q1. Which CLI command do you use on Cisco IOS XE Software to put the AP named Floor1_AP1 back in the default AP group? 

A. ap Floor1_AP1 ap-groupname default-group 

B. ap name Floor1_AP1 apgroup default-group 

C. ap name Floor1_AP1 ap-groupname default-group 

D. ap name Floor1_AP1 ap-groupname default 

Answer: C 

Q2. Which EAP type requires the use of device certificates? 

A. EAP-TLS 

B. EAP-FAST 

C. EAP-SSL 

D. PEAP 

E. LEAP 

Answer: A 

Q3. Which mobility mode must a Cisco 5508 wireless Controller be in to use the MA functionality on a cisco catalyst 3850 series switch with a cisco 550 Wireless Controller as an MC? 

A. classic mobility 

B. new mobility 

C. converged access mobility 

D. auto-anchor mobility 

Answer: C 

Q4. An engineer has determined that the source of an authentication issue is the client laptop. Which three items must be verified for EAP-TLS authentication? (Choose three.) 

A. The client certificate is formatted as X 509 version 3 

B. The validate server certificate option is disabled. 

C. The client certificate has a valid expiration date. 

D. The user account is the same in the certificate. 

E. The supplicant is configured correctly. 

F. The subject key identifier is configured correctly. 

Answer: A, D, F 

Q5. A customer is concerned that radar is impacting the access point that service the wireless network in an office located near an airport. On which type of channel should you conduct spectrum analysis to identify if radar is impacting the wireless network? 

A. UNII-3 channels 

B. UNII-1 channels 

C. 802.11b channels 

D. 2.4 GHz channels 

E. UMII-2 channels 

F. Channels 1, 5, 9, 13 

Answer: E 

Q6. Which three commands are part of the requirements on Cisco Catalyst 3850 series Switch with Cisco IOX XE to create a RADIUS authentication server group? (Choose three.) 

A. authentication dot1x default local 

B. aaa session-idcommon 

C. dot1x system-auth-control 

D. aaa new-model 

E. local-auth wcm_eap_prof 

F. security dot1x 

Answer: B, C, D 

Q7. An engineer is considering an MDM integration with Cisco ISE to assist with security for lost devices. Which two functions of MDM increase security for lost devices that access data from the network? (Choose two.) 

A. PIN enforcement 

B. Jailbreak/root detection 

C. data wipe 

D. data encryption 

E. data loss prevention 

Answer: A, C 

Q8. Which CLI command do you use on Cisco IOS XE Software to put the AP named Floor1_AP1 back in the default AP group? 

A. ap Floor1_AP1 ap-groupname default-group 

B. ap name Floor1_AP1 apgroup default-group 

C. ap name Floor1_AP1 ap-groupname default-group 

D. ap name Floor1_AP1 ap-groupname default 

Answer: C 

Q9. When you configure BYOD access to the network, you face increased security risks and challenges. Which challenge is resolved by deploying digital client certificates? 

A. managing the increase connected devices 

B. ensuring wireless LAN performance and reliability 

C. providing device choice and support 

D. enforcing company usage policies 

Answer: D 

Q10. An engineer is configuring a new mobility anchor for a WLAN on the CLI with the config wlan mobility anchor add 3 10.10.10.10 command, but the command is failing. Which two conditions must be met to be able to enter this command? (Choose two.) 

A. The anchor controller IP address must be within the management interface subnet. 

B. The anchor controller must be in the same mobility group. 

C. The WLAN must be enabled. 

D. The mobility group keepalive must be configured. 

E. The indicated WLAN ID must be present on the controller. 

Answer: A, B