A Review Of Realistic 350-601 Training Tools

NEW QUESTION 1
An engineer is implementing FCoE.
Which aspect of DCBXP on a Cisco Nexus switch affects this implementation?

• A. It requires that LLDP transmit and LLDP receive are enabled on the FCoE interface.
• B. It uses the Cisco Fabric Services protocol to exchange parameters between two peer links.
• C. It provides the authentication of peers on the Cisco Nexus switch.
• D. It always is enabled on 10/100-Mbps native Ethernet ports.

Answer: A

NEW QUESTION 2
An engineer is implementing NPV mode on a Cisco MDS 9000 Series Switch.
Which action must be taken?

• A. NPIV must be enabled on the upstream switch.
• B. The FCNS database must be disabled in the fabric.
• C. A port channel must be configured to the upstream switch.
• D. All switches in the fabric must be Cisco MDS switches.

Answer: A

NEW QUESTION 3
Refer to the exhibit.

Which result of running the command is true?

• A. Multicast traffic forwarding is suspended.
• B. MRIB is flushed.
• C. The PIM database is deleted.
• D. PIM join messages are suspended.

Answer: C

NEW QUESTION 4
An engineer is asked to use SaaS to manage Cisco computing.
Which two items are needed to accomplish the task? (Choose two.)

• A. Intersight
• B. UCS Central
• C. Device/Claim ID
• D. Node name/Serial Number
• E. UCS Manager

Answer: AE

NEW QUESTION 5
An engineer is configuring a backup operation on the existing Cisco UCS environment using a logical configuration.
Which configuration is expected to be saved by using this backup type?

• A. systems
• B. roles
• C. servers
• D. service profiles

Answer: D

NEW QUESTION 6
Refer to the exhibit.

What is configured as a result of running these commands?

• A. loose unicast RPF
• B. strict unicast RPF
• C. IP Source Guard
• D. reverse lookup for outbound packets

Answer: B

NEW QUESTION 7
DRAG DROP
An engineer deploys a custom guest shell rootfs onto multiple switches. Drag and drop the steps from the left into the correct order on the right. Export the Guest Shell rootfs.
Select and Place:

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 8
An engineer changed a configuration and must perform a rollback.
Which statement applies to a Cisco Nexus 5600 Series Switch?

• A. The configuration rollback functionality is disabled when FCoE is enabled.
• B. A system checkpoint is generated automatically when the running configuration is saved to NVRAM.
• C. A user who is assigned to the network-operator user role can perform a rollback.
• D. Errors are skipped when an atomic rollback type is triggered.

Answer: A

NEW QUESTION 9
Which action must be performed before renumbering a Cisco UCS chassis?

• A. Run the shut and no shut command on the connected ports.
• B. Move the chassis to new ports on fabric interconnect.
• C. Decommission the chassis.
• D. Re-acknowledge the chassis.

Answer: C

NEW QUESTION 10
Which virtual MAC address is the default for HSRP version 2 group 10?

• A. 0000.5E00.0110
• B. 0000.0C9F.F00A
• C. 3716.1350.1C0A
• D. 0000.0C9F.F010

Answer: B

NEW QUESTION 11
The engineer must configure SPAN on a Cisco Nexus 5000 Series Switch to get a capture of the traffic from these applications for an in-depth packet analysis. Which two SPAN characteristics must be considered? (Choose two.)

• A. SPAN source ports can be monitored in multiple SPAN sessions.
• B. The Ethernet, FC, vFC, port channel, SAN port channel can be used as SPAN source ports.
• C. A SPAN source port cannot be a destination SPAN port.
• D. Only Ethernet, FC, vFC, port channel port types can be used as SPAN source ports.
• E. The rx/tx option is available for VLAN or VSAN SPAN sessions.

Answer: BC

NEW QUESTION 12
Which configuration implements static ingress replication?

• A.
• B.
• C.
• D.

Answer: D

NEW QUESTION 13
DRAG DROP
A network engineer must implement RBAC on Cisco MDS 9000 Series Multilayer Switches.
Drag and drop the Cisco MDS 9000 Series roles from the left onto the correct categories on the right.
Select and Place:

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 14
Which two statements about the process at upgrading an EPLD on a Cisco MDS 9000 Series Switch are correct? (Choose two.)

• A. EPLDs can be upgraded only to the latest EPLD image.
• B. EPLD upgrades can be completed without powering down the module during the upgrade.
• C. An upgrade verification identifies the impact of each EPLD upgrade.
• D. The EPLDs for all the modules on a switch must be upgraded at the same time.
• E. EPLDs can be upgraded without replacing the hardware.

Answer: CE

NEW QUESTION 15
Refer to the exhibit.

The STP priority of N7K-1 and N7K-2 are the lowest in the network. Which statement describes STP on the vPC?

• A. N7K-1 and N7K-2 appear as a single STP root.
• B. N7K-1 appears as the STP root.
• C. N7K-1 preempts N7K-2 as the STP root.
• D. N7K-2 appears as the STP root.

Answer: A

NEW QUESTION 16
An engineer enters these commands while in EEM on a Cisco Nexus 9000 Series Switch
event manager applet Backup-config event timer watchdog time 1800 name timer event cli match "copy running-config startup-config" What is the result of applying this configuration?

• A. It generates an error because no action is mentioned.
• B. It executes the copy running-config startup-coring command.
• C. It saves the running configuration every 1800 seconds.
• D. It blocks the copy running-config startup-config command.

Answer: A

NEW QUESTION 17
Refer to the exhibit.

What is the result of implementing this configuration?

• A. The Fibre Channel interface is configured for SPAN.
• B. The Fibre Channel interface is configured for source distribution.
• C. The Fibre Channel interlace is configured for FSPF.
• D. The Fibre Channel interface is configured for synchronization distribution.

Answer: A

NEW QUESTION 18
A customer has a requirement for an automation solution that supports periodically acquiring configuration from a centralized server and aligning UCS servers to their desired state. Which open-source tool meets this requirement?

• A. SaltStack
• B. Kubernetes
• C. Puppet
• D. Terraform

Answer: C

NEW QUESTION 19
An engineer must implement a Cisco UCS system at a customer site. One of the requirements is to implement SAN boot. The storage system maps the source WWPN to a unique LUN. Which method does Cisco recommend to configure the SAN boot?

• A. Define the vHBAs as bootable and leave the boot target definition empty.
• B. Create a SAN boot policy in which every initiator is mapped to a different target LUN.
• C. Define the vHBAs as bootable and leave the default values on the boot target definition.
• D. Create a SAN boot policy in which every initiator is mapped to the same target LUN.

Answer: D

NEW QUESTION 20
A small remote office is set to connect to the regional hub site via NSSA ASBR.
Which type of LSA is sent to the remote office OSPF area?

• A. type 7 LSA
• B. type 1 LSA
• C. type 5 LSA
• D. type 3 LSA

Answer: A

NEW QUESTION 21
An engineer is asked to manage a large-scale data center and collect information from multiple Cisco NX-OS devices using Cisco NX-OS Data Management Engine model.
Which technology should be used to accomplish this goal?

• A. NETCONF
• B. NX Yang
• C. NX-API REST
• D. JSON-RPC

Answer: C

NEW QUESTION 22
APIC EPG Resolution Immediacy is set to "Immediate".
Which statement is true about the Deployment Immediacy for VMM domains associated to EPGs?

• A. If "On demand" is selected, the policy is programmed in the hardware only when the first packet is received through the data path.
• B. It "Immediate" is selected, the policy is programmed in the hardware as soon as the leaf is booted.
• C. The "Immediate" and "On demand" options require a port group to be created on the VDS.
• D. If "On demand" is selected, the policy is programmed in the hardware only when the APIC detects a VM created in the EPG.

Answer: A

NEW QUESTION 23
Refer to the exhibit.

What is the outcome of this command when the EPLD is updated on a Cisco Nexus 9000 Series Switch?

• A. displays the compatibility of the EPLD upgrade and the image in the bootflash
• B. shows a simulated upgrade of the EPLD
• C. upgrades the EPLD on the switch disruptively
• D. displays the impact of the upgrade on the operation of the switch

Answer: A

NEW QUESTION 24
......