how many questions of 352-001 vce?

Q1. You are the lead IP/MPLS network designer of a service provider called XYZ. You are leading a design discussion regarding IPv6 implementation in the XYZ MPLS network, using MPLS 6PE/6VPE techniques. Currently, XYZ provides IPv4 multicast services over an MPLS network by using MVPN, and would like to provide parallel IPv6 multicast services. Which three multicast solutions should be enabled? (Choose three.) 

A. native IPv6, only for multicast services 

B. MPLS 6PE/6VPE, because it provides IPv6 multicast support by default 

C. an overlay model using Layer 2 MPLS tunnels 

D. PIM-DM to enable IPv6 multicast in conjunction with MPLS 6PE/6VPE 

E. MVPN for IPv6 multicast service 

View Answer

Q2. The Service Provider you work for wants to deploy CoS functionality on the P routers of the MPLS core, to provide a complete CoS solution to all customers that purchase services such as dedicated Internet access, MPLS Layer 3 VPN, and Layer 2 VPN (pseudowire). The design requirements are: 

. The network supports four service queues with equal treatment for delay, jitter, 

and packet loss. 

. Queues are numbered 0–3, where 0 is the default queue. 

. Three queues have one treatment, whereas the other queue has either one or two 

treatments. 

. The Service Provider manages control traffic, whereas the customers manage 

business critical and best effort. 

Which two statements could you recommend to allow for the appropriate level of bandwidth allocation? (Choose two.) 

A. Control plane 10%, Real Time 30%, Business Critical 40%, Best Effort 20% 

B. Control plane 80%. Real Time 10%, Business Critical 5%, Best Effort 5% 

C. Control plane 90%, Real Time 5%, Business Critical 5%, Best Effort 0% 

D. Control plane 20%, Real Time 40%, Business Critical 30%, Best Effort 10% 

View Answer

Q3. As part of the network design, ACME Corporation requires the ability to export IPv6 information to better manage its network. Which version of NetFlow records is required to export this information? 

A. 5 

B. 6 

C. 7 

D. 8 

E. 9 

View Answer

Q4. What is a key role for the access layer in a hierarchical network design? 

A. The access layer provides a security, QoS, and policy trust boundary. 

B. The access layer provides an aggregation point for services and applications. 

C. The access layer serves as a distribution point for services and applications. 

D. The access layer can be used to aggregate remote users. 

View Answer

Q5. A metro service provider is planning Resilient Ethernet Protocol for his backbone. Which two aspects must be considered before the network design is finalized? (Choose two.) 

A. Two Resilient Ethernet Protocol segments can be connected redundantly at two points. One connection will be blocked, using the Spanning Tree Protocol defined in IEEE 802.1D. 

B. UniDirectional Link Detection Protocol can be enabled on Resilient Ethernet Protocol interfaces to detect unidirectional failures. 

C. The guaranteed convergence recovery time is less than 50 ms for the local segment. 

D. A Resilient Ethernet Protocol segment is limited to a maximum of seven devices. 

E. VLAN load balancing for optimal bandwidth usage is supported in any Resilient Ethernet Protocol segment. 

View Answer

Q6. Which two mechanisms ensure that a network design provides fast path failure detection? (Choose two.) 

A. BFD 

B. fast hello packets 

C. UDLD 

D. IP Cisco Express Forwarding 

View Answer

Q7. Refer to the exhibit. 

Company A is running a single-area OSPF, and Company B is running RIP as the IGP with no overlapping IP address spaces. Company A has just acquired Company B and both networks must be merged. Which three design components are recommended to guarantee connectivity and redundancy between the two networks? (Choose three.) 

A. Enable mutual redistribution between OSPF and RIP on one border router. 

B. Enable mutual redistribution between OSPF and RIP on Router A and Router B using route tags. 

C. Increase the administrative distance to 130 for the OSPF external prefixes on Router A and Router B. 

D. Implement an ACL on Router A and Router B to prevent OSPF external routes from being installed in the OSPF database. 

E. Filter external routes on Router A and Router B based on route tags. 

View Answer

Q8. You are deploying a nationwide intranet solution for a company with 4 data centers and 400 remote branches connected via a provider-based solution. As part of the network design, you must ensure efficient content distribution of training material to remote sites. Which two VPN technologies leverage replication in the network core and provide for efficient bandwidth optimization? (Choose two.) 

A. VPLS 

B. EoMPLS 

C. MPLS Layer 3 VPN 

D. GRE 

E. GET VPN 

View Answer

Q9. You have been hired by a startup company to provide optical services using MPLS-TP. Which three options describe reasons to use the MPLS-TP standard in your design? (Choose three.) 

A. MPLS-TP is a newer packet transport technology that replaces SONET/SDH. 

B. MPLS-TP includes extensions to native MPLS OAM for fault detection, monitoring, and propagation. 

C. MPLS-TP requires a routing protocol. 

D. MPLS-TP uses an IANA assigned label 13 for OAM. 

E. MPLS-TP uses Ethernet Y.1731 OAM. 

View Answer

Q10. A company is planning to connect its 30 sites with a VPLS WAN backbone. A router at each site should establish neighborships with all other routers using the OSPF routing protocol. Which three points must be considered regarding DR and BDR when different router platforms are used? (Choose three.) 

A. It is a best practice that the routers with the most powerful hardware should take the role of the DR and BDR. 

B. If the IP OSPF priority is the same for all routers, the highest loopback IP address and router ID will decide which routers will take the DR and BDR role during the selection process. 

C. To select the DR and BDR, the IP OSPF priority must be set to a higher value than the default value at the DR and BDR during the selection process. 

D. To select the DR and BDR, the IP OSPF priority must be set to a lower value than the default value at the DR and BDR during the selection process. 

E. The role for the DR and BDR will be selected when a new OSPF router comes up. 

F. To force two routers to become a DR and a BDR, the IP OSPF priority can be set to zero at all other OSPF routers. 

View Answer