Latest 600-210 Exam Study Guides With New Update Exam Questions

Q1. According to 3GPP standards, which option is the interface between the Charging Data Function and the Charging Gateway Function? 

A. Gz 

B. Gc 

C. AAA 

D. Rf 

E. Ga 

View Answer

Q2. An airport is providing free one-hour mobile Internet service for passengers. At the end of the free one-hour service, the PCRF sends a Diameter command to the mobile packet core to stop the free service. Which Diameter command is sent by the PCRF? 

A. CCR-U 

B. RAR 

C. CCR-T 

D. STA 

E. RAA 

View Answer

Q3. Which two options describe two reasons for deploying MPLS on GGSN? (Choose two.) 

A. Ensure faster routing. 

B. Replace RIP. 

C. Allow overlapping IP addressing in different APNs. 

D. Segregate corporate APN traffic. 

E. Replace GRE tunnels. 

View Answer

Q4. Which two services require a status check on the Cisco ASR 5000 if no Context Request Message is sent from SGSN to MME over the S3 interface? (Choose two.) 

A. EGTP-service 

B. SGSN-service 

C. HSS-peer-service 

D. SGTP-service 

E. SGS-service 

View Answer

Q5. In which two scenarios is a create bearer request sent from the SGW to the SGSN on the S4 interface? (Choose two.) 

A. secondary PDP context activation procedure 

B. network-requested secondary PDP context activation procedure 

C. network-triggered service request procedure 

D. when downlink data arrives for the released bearers 

E. PGW restart restoration procedure 

View Answer

Q6. Which option describes the message that establishes the direct tunnel between RNC and GGSN? 

A. SGSN context request/response and modify PDP context request/response 

B. SGSN: Initiated update PDP context request/response and RAB assignment request/response 

C. GGSN: Initiated update PDP context request/response and RAB assignment request/response 

D. SGSN: Initiated update PDP context request/response and modify PDP context request/response 

View Answer

Q7. Which description of a smurf attack is true? 

A. A smurf attack is an attack in which small TCP packets are sent toward a server from thousands of subscribers, which causes the server network buffer to overflow and drop packets and results in a denial of service. 

B. A smurf attack is an attack in which the attacker sends ICMP echo request packets using a spoofed source IP address destined to remote network broadcast addresses, which results in all recipients replying back to the spoofed source IP address in an attempt to cause a denial of service to the targeted spoofed IP address. 

C. A smurf attack is an attack in which the attacker sends UDP echo packets using a spoofed source IP address destined to remote network broadcast addresses, which results in all recipients replying back to the spoofed source IP address in an attempt to cause a denial of service to the targeted spoofed IP address. 

D. A smurf attack is an attack in which the attacker attempts to change the TCP MSS value to a small value for all TCP flows destined to the target device, which results in many small packets having to be processed by the target, which causes buffer overflows and denial of service. 

View Answer

Q8. Your company has decided to implement URL blacklisting for the ACME company rulebase and discard any blacklisted matches found in subscriber HTTP traffic. 

Which configuration accomplishes this task? 

A. active-charging service acme_acs url-blacklisting method exact-match rulebase acme_rulebase url-blacklisting action discard 

B. active-charging service acme_acs url-blacklisting method exact-match rulebase acme_rulebase url-blacklisting action terminate-flow 

C. active-charging service acme_acs url-blacklisting method http post url-blacklisting method http get rulebase acme_rulebase url-blacklisting action discard 

D. active-charging service acme_acs url-blacklisting method http post url-blacklisting method http get rulebase acme_rulebase url-blacklisting action terminate-flow 

View Answer

Q9. Through which two procedures does a direct tunnel session change to a two-tunnel session? (Choose two.) 

A. Iu-release request procedure initiated by RNC 

B. GTPU-error indication by the RNC to the GGSN 

C. UE-initiated secondary PDP context activation 

D. successful GGSN-initiated PDP modification procedure 

E. successful UE-initiated PDP modification procedure 

F. periodic RAU procedure triggered by the UE 

View Answer

Q10. Your company wants to limit bandwidth for Skype traffic. You have been tasked to configure Application Detection and Control using the Cisco ASR 5000 to detect Skype traffic for all subscribers. If Skype traffic is detected, limit the uplink and downlink data rate to 32 kb/s. 

Which required configuration is needed to complete this task? 

A. active-charging service ACS_ACME p2p-detection protocol skype ruledef skype_detection p2p protocol = skype exit charging-action skype_rate_limit content-id 1500 flow limit-for-bandwidth direction downlink peak-data-rate 32000 peak-burst- 8000 violate-action discard flow limit-for-bandwidth direction uplink peak-data-rate 32000 peak-burst- 8000 violate-action discard rulebase acme_rulebase action priority 1000 ruledef skype_detection charging-action skype_rate_limit 

B. active-charging service ACS_ACME ruledef skype_detection p2p protocol = skype exit charging-action skype_rate_limit content-id 1500 flow limit-for-bandwidth direction downlink peak-data-rate 16000 peak-burst- 8000 violate-action discard flow limit-for-bandwidth direction uplink peak-data-rate 16000 peak-burst- 8000 violate-action discard rulebase acme_rulebase action priority 32000 ruledef skype_detection charging-action skype_rate_limit 

C. active-charging service ACS_ACME p2p-detection protocol skype ruledef skype_detection p2p protocol = skype flow limit-for-bandwidth direction downlink peak-data-rate 32000 peak-burst- 8000 violate-action discard flow limit-for-bandwidth direction uplink peak-data-rate 32000 peak-burst- 8000 violate-action discard exit rulebase acme_rulebase action priority 1000 ruledef skype_detection 

D. active-charging service ACS_ACME p2p-detection protocol skype ruledef skype_detection p2p protocol = skype_traffic exit charging-action skype_rate_limit content-id 1500 flow limit-for-credit direction downlink peak-data-rate 32000 peak-burst- 8000 violate-action discard flow limit-for-credit direction uplink peak-data-rate 32000 peak-burst- 8000 violate-action discard rulebase acme_rulebase action priority 1000 ruledef skype_detection charging-action skype_rate_limit 

View Answer